Ryszard Mazurek

Assessment of heavy metals contamination in surface layers of Roztocze National Park forest soils (SE Poland) by indices of pollution

In most cases, in soils exposed to heavy metals accumulation, the highest content of heavy metals was noted in the surface layers of the soil profile. Accumulation of heavy metals may occur both as a result of natural processes as well as anthropogenic activities. The quality of the soil exposed to heavy metal contamination can be evaluated by indices of pollution. On the basis of determined heavy metals (Pb, Zn, Cu, Mn, Ni and Cr) in the soils of Roztocze National Park the following indices of pollution were calculated: Enrichment Factor (EF), Geoaccumulation Index (Igeo), Nemerow Pollution Index (PINemerow) and Potential Ecological Risk (RI). Additionally, we introduced and calculated the Biogeochemical Index (BGI), which supports determination of the ability of the organic horizon to accumulate heavy metals. A tens of times higher content of Pb, Zn, Cu and Mn was found in the surface layers compared to their content in the parent material. This distribution of heavy metals in the studied soils was related to the influence of anthropogenic pollution (both local and distant sources of emission), as well as soil properties such as pH, organic carbon and total nitrogen content.

Soil pollution indices conditioned by medieval metallurgical activity – A case study from Krakow (Poland) ☆

The studied soil profile under the Main Market Square (MMS) in Krakow was characterised by the influence of medieval metallurgical activity. In the presented soil section lithological discontinuity (LD) was found, which manifests itself in the form of cultural layers (CLs). Moreover, in this paper LD detection methods based on soil texture are presented. For the first time, three different ways to identify the presence of LD in the urban soils are suggested. The presence of LD had an influence on the content and distribution of heavy metals within the soil profile. The content of heavy metals in the CLs under the MMS in Krakow was significantly higher than the content in natural horizons. In addition, there were distinct differences in the content of heavy metals within CLs. Profile variability and differences in the content of heavy metals and phosphorus within the CLs under the MMS were activity indicators of Krakow inhabitants in the past. This paper presents alternative methods for the assessment of the degree of heavy metal contamination in urban soils using selected pollution indices. On the basis of the studied total concentration of heavy metals (Zn, Pb, Cu, Mn, Cr, Cd, Ni, Sn, Ag) and total phosphorus content, the Geoaccumulation Index (Igeo), Enrichment Factor (EF), Sum of Pollution Index (PIsum), Single Pollution Index (PI), Nemerow Pollution Index (PINemerow) and Potential Ecological Risk (RI) were calculated using different local and reference geochemical backgrounds. The use of various geochemical backgrounds is helpful to evaluate the assessment of soil pollution. The individual CLs differed from each other according to the degree of pollution. The different values of pollution indices within the studied soil profile showed that LDS should not be evaluated in terms of contamination as one, homogeneous soil profile but each separate CL should be treated individually.

Comprehensive assessment of heavy metal pollution in topsoil of historical urban park on an example of the Planty Park in Krakow (Poland)

The Historic Centre of Krakow is on the UNESCO World Heritage List and includes the Main Market Square, which is surrounded by the historical Planty Park. Soils in the Planty Park are an example of a green area in an urban environment that is particularly exposed to heavy metal-rich pollution. To assess the relative content of heavy metals and evaluate the sources of the contamination, pollution indices were used: Enrichment Factor (EF), Geoaccumulation Index (Igeo), Nemerow Pollution Index (PINemerow), Potential Ecological Risk (RI), and Contamination Security Index (CSI). Pollution indices were calculated on the base of both reference and local geochemical backgrounds. Sources of heavy metals in soils of Planty Park are related to its historic role as a metallurgy centre, as well as the more recent urban and industrial development of Krakow centre and neighbouring areas. It is concluded that increased accumulation of heavy metals is an effect of growing numbers of emission sources. The variation of each element may not unambiguously reflect the natural or anthropogenic effect on the Planty Park soil cover. In general, the present and historical emission of pollutants and heavy metal-rich contamination has led to a mixed origin of Cd, Cu, Pb, and Zn. Moreover, it can be assumed that the content of Cr and Ni is derived from natural sources. Furthermore, a comparison of the quality of the Planty Park topsoil with the heavy metal content assessment in other urban parks in the world has been presented.

Effect of Polonite used for phosphorus removal from wastewater on soil properties and fertility of a mountain meadow

Reactive filter materials used for phosphorus (P) removal from wastewater can be disposed of as soil amendments after treatment, thus recycling P and other macro- and micro-nutrients to plants. In addition, materials with a high pH and Ca content, such as Polonite, are potential soil conditioners, which can be particularly beneficial for acid soils. Polonite previously used for on-site wastewater treatment was applied as a soil amendment to a mountain meadow. The amendment significantly increased soil pH and decreased the hydrolytic acidity, thus reducing Al toxicity risks. The effects were comparable to those of liming. No difference in yield and P uptake by meadow plants was observed. The uptake of metals was lower for amended soils, especially the uptake of Mn. Using Polonite after wastewater treatment as a soil amendment is thus a viable disposal alternative that can replace liming, when necessary, being capable of recycling P and other nutrients to meadow plants.

Phosphorus sorption capacity of different types of opoka

Phosphorus sorption capacity of different types of opoka The bedrock opoka has been lately reported as an appropriate reactive media for onsite wastewater treatment systems due to its high phosphorus (P) sorption capacity. However, variations on its chemical composition may affect its reactivity with P, therefore leading to a variable P removal efficiency. In this paper, the P-sorption capacity of three different types of opoka from the region of Miechów, Poland, is reported. According to the silica and carbonate content, opoka samples were classified as light-weight and heavy-weight opoka. When heated over 900°C, opoka showed a very high P-sorption capacity that was well correlated to its Ca content. P-sorption isotherms from batch experiments with an artificial P solution were plotted and fitted to the Langmuir and Freundlich adsorption models. The Freundlich isotherm appeared to model better the P-sorption of light opoka and the Langmuir isotherm of heavy opoka, suggesting different dominating mechanisms of P-sorption by light and heavy opoka. Zdolność wchłaniania fosforu przez różne rodzaje opoki Według ostatnich badań opoka jest uważana za sorbent, który ze względu na wysoką zdolność wiązania fosforu, może mieć zastosowanie w przydomowych oczyszczalniach ścieków. Jednakże różnorodność składu chemicznego opoki wpływa na intensywność wiązania P i prowadzi do różnej efektywności procesu oczyszczania ścieków. W pracy przedstawiono zdolność wiązania P przez trzy rodzaje opok pobranych w rejonie Miechowa (woj. małopolskie). Na podstawie zawartości krzemionki i węglanów próbki zostały podzielone na opokę lekką i ciężką. Po wypaleniu w temperaturze ponad 900°C opoka charakteryzowała się bardzo wysoką zdolnością wiązania P, silnie skorelowaną z zawartością Ca. Krzywe sorpcji P, otrzymane podczas doświadczenia ze sztucznie sporządzonym roztworem zawierającym rozpuszczony P, porównano z modelami absorpcji opracowanymi przez Langmuira i Freundlicha. Izoterma Freundlicha była bardziej zbliżona do krzywej wiązania P przez opokę lekką, z kolei model Langmuira okazał się bliższy krzywej sorpcji opoki ciężkiej.

Recycling of Calcium-Silicate Material After Wastewater Filtration to Agriculture - Soil Condition Impact

Recycling of Calcium-Silicate Material After Wastewater Filtration to Agriculture - Soil Condition Impact Reactive filter materials aimed at phosphorus (P) recovery is a novel method for on-site wastewater treatment. Once the bed filter is no longer effective, the sorbent must be replaced and can then be recycled as a soil amendment to agriculture. This study investigated the short-term effects of such amendments in a field with a wheat crop in order to evaluate the risks and/or potential benefits of this disposal option. The developed product Polonite (manufactured from Opoka) was used as a model filter sorbent in the field trial. Rates corresponding to approximately 6 and 8 tons per hectare were applied. In the short-term, this amending did not affect soil physical and sorption properties. The rate of Polonite used here, as P source for wheat was irrelevant in this kind of soil. The usefulness of this disposal option of exhausted filter material is discussed. Wykorzystanie rolnicze materiałów wapniowo-krzemianowych z oczyszczalni ścieków i ich wpływ na właściwości gleby Zastosowanie reaktywnych materiałów filtracyjnych jest nową metodą oczyszczania ścieków w miejscu ich powstawania i odzyskania z nich fosforu (P). W celu zapewnienia efektywności oczyszczania ten materiał powinien być co pewien czas wymieniany. Ten zużyty, porowaty materiał może być wykorzystany w rolnictwie. W pracy przedstawiono wyniki badań nad zastosowaniem wapniowo-krzemianowego porowatego materiału w uprawie pszenicy. W badaniach polowych użyto Polonite - produktu handlowego wytworzonego z opoki, o wysokiej skuteczności oczyszczania ścieków bytowych z fosforu. W eksperymencie wykorzystano dwie dawki Polonitu 6 i 8 Mg·h-1. Po jego zastosowaniu w krótkim okresie czasu nie stwierdzono wpływu na właściwości sorpcyjne i fizyczne gleby. Wpływ Polonitu na zawartość przyswajalnego fosforu w glebie był nieistotny. W pracy przedstawiono praktyczne znaczenie tej metody.

Pollution indices as useful tools for the comprehensive evaluation of the degree of soil contamination–A review

The paper provides a complex, critical assessment of heavy metal soil pollution using different indices. Pollution indices are widely considered a useful tool for the comprehensive evaluation of the degree of contamination. Moreover, they can have a great importance in the assessment of soil quality and the prediction of future ecosystem sustainability, especially in the case of farmlands. Eighteen indices previously described by several authors (Igeo, PI, EF, Cf, PIsum, PINemerow, PLI, PIave, PIVector, PIN, MEC, CSI, MERMQ, Cdeg, RI, mCd and ExF) as well as the newly published Biogeochemical Index (BGI) were compared. The content, as determined by other authors, of the most widely investigated heavy metals (Cd, Pb and Zn) in farmland, forest and urban soils was used as a database for the calculation of all of the presented indices, and this shows, based on statistical methods, the similarities and differences between them. The indices were initially divided into two groups: individual and complex. In order to achieve a more precise classification, our study attempted to further split indices based on their purpose and method of calculation. The strengths and weaknesses of each index were assessed; in addition, a comprehensive method for pollution index choice is presented, in order to best interpret pollution in different soils (farmland, forest and urban). This critical review also contains an evaluation of various geochemical backgrounds (GBs) used in heavy metal soil pollution assessments. The authors propose a comprehensive method in order to assess soil quality, based on the application of local and reference GB.

Assessment of the pollution and ecological risk of lead and cadmium in soils

The aim of the study was to assess the content, distribution, soil binding capacity, and ecological risk of cadmium and lead in the soils of Malopolska (South Poland). The investigation of 320 soil samples from differently used land (grassland, arable land, forest, wasteland) revealed a very high variation in the metal content in the soils. The pollution of soils with cadmium and lead is moderate. Generally, a point source of lead and cadmium pollution was noted in the study area. The highest content of cadmium and lead was found in the northwestern part of the area—the industrial zones (mining and metallurgical activity). These findings are confirmed by the arrangement of semivariogram surfaces and bivariate Moran’s correlation coefficients. Among the different types of land use, forest soils had by far the highest mean content of bioavailable forms of both metals. The results showed a higher soil binding capacity for lead than for cadmium. However, for both metals, extremely high (class 5) accumulation capacities were dominant. Based on the results, the investigated soils had a low (Pb) and moderate (Cd) ecological risk on living components. Soil properties, such as organic C, pH, sand, silt, and clay content, correlated with the content of total and bioavailable forms of metals in the soils. The correlations, despite being statistically significant, were characterized by very low values of correlation coefficient (r = 0.12–0.20, at p ≤ 0.05). Therefore, the obtained data do not allow to define any conclusions as to the relationships between these soil properties. However, it must be highlighted that there was a very strong positive correlation between the total content of cadmium and lead and their bioavailable forms in the soils.

Trophic conditions of forest soils of the Pieniny National Park, southern Poland

Abstract The primary objective of this study was to characterise the edaphic conditions of forest areas in the Pieniny National Park (PNP), and to describe the dependencies between properties of forest soils and types of forest plant communities. The “Soil Trophic Index” (SIGg) for mountainous areas was applied. The evaluation of the trophism for 74 forest monitoring employed the soil trophic index for mountainous areas SIGg or SIGgo. Plant communities in the forest monitoring areas were classified according to the Braun-Blanquet’s phytosociological method. Soils of PNP present in the forest monitoring areas were mostly classified as eutrophic brown soils (72.9%), rendzinas (10.8%), brown rendzinas (5.41%), and rubble initial soils (5.41%). Pararendzinas, dystrophic brown soils, and gley soils were less common (total below 5.5%). In the forest monitoring areas of PNP, eutrophic soils predominate over mesotrophic soils. High SIGg index of the soils is caused by high values of acidity and nitrogen content. The Carpathian beech forest Dentario glandulosae-Fagetum and thermophilic beech forest Carici albae-Fagetum associations are characterised by high naturalness and compatibility of theoretical habitats. The soils of the Carpathian fir forest Dentario glandulosae-Fagetum abietetosum subcommunity is characterised by a higher share of silt and clay particles and lower acidity as compared to the Carpathian beech forest Dentario glandulosae-Fagetum typicum subcommunity. The soils of the forest monitoring areas in PNP stand out in terms of their fertility against forest soils in other mountainous areas in Poland.