S. Chantal E. Stieber

Catalytic Hydrogenation Activity and Electronic Structure Determination of Bis(arylimidazol-2-ylidene)pyridine Cobalt Alkyl and Hydride Complexes

The bis(arylimidazol-2-ylidene)pyridine cobalt methyl complex, ((iPr)CNC)CoCH3, was evaluated for the catalytic hydrogenation of alkenes. At 22 °C and 4 atm of H2 pressure, ((iPr)CNC)CoCH3 is an effective precatalyst for the hydrogenation of sterically hindered, unactivated alkenes such as trans-methylstilbene, 1-methyl-1-cyclohexene, and 2,3-dimethyl-2-butene, representing one of the most active cobalt hydrogenation catalysts reported to date. Preparation of the cobalt hydride complex, ((iPr)CNC)CoH, was accomplished by hydrogenation of ((iPr)CNC)CoCH3. Over the course of 3 h at 22 °C, migration of the metal hydride to the 4-position of the pyridine ring yielded (4-H2-(iPr)CNC)CoN2. Similar alkyl migration was observed upon treatment of ((iPr)CNC)CoH with 1,1-diphenylethylene. This reactivity raised the question as to whether this class of chelate is redox-active, engaging in radical chemistry with the cobalt center. A combination of structural, spectroscopic, and computational studies was conducted and provided definitive evidence for bis(arylimidazol-2-ylidene)pyridine radicals in reduced cobalt chemistry. Spin density calculations established that the radicals were localized on the pyridine ring, accounting for the observed reactivity, and suggest that a wide family of pyridine-based pincers may also be redox-active.

Oxidative Addition of Carbon–Carbon Bonds with a Redox-Active Bis(imino)pyridine Iron Complex

Addition of biphenylene to the bis(imino)pyridine iron dinitrogen complexes, ((iPr)PDI)Fe(N(2))(2) and [((Me)PDI)Fe(N(2))](2)(μ(2)-N(2)) ((R)PDI = 2,6-(2,6-R(2)-C(6)H(3)-N═CMe)(2)C(5)H(3)N; R = Me, (i)Pr), resulted in oxidative addition of a C-C bond at ambient temperature to yield the corresponding iron biphenyl compounds, ((R)PDI)Fe(biphenyl). The molecular structures of the resulting bis(imino)pyridine iron metallacycles were established by X-ray diffraction and revealed idealized square pyramidal geometries. The electronic structures of the compounds were studied by Mössbauer spectroscopy, NMR spectroscopy, magnetochemistry, and X-ray absorption and X-ray emission spectroscopies. The experimental data, in combination with broken-symmetry density functional theory calculations, established spin crossover (low to intermediate spin) ferric compounds antiferromagnetically coupled to bis(imino)pyridine radical anions. Thus, the overall oxidation reaction involves cooperative electron loss from both the iron center and the redox-active bis(imino)pyridine ligand.

Covalency in Lanthanides. An X-ray Absorption Spectroscopy and Density Functional Theory Study of LnCl6x– (x = 3, 2)

Covalency in Ln-Cl bonds of Oh-LnCl6(x-) (x = 3 for Ln = Ce(III), Nd(III), Sm(III), Eu(III), Gd(III); x = 2 for Ln = Ce(IV)) anions has been investigated, primarily using Cl K-edge X-ray absorption spectroscopy (XAS) and time-dependent density functional theory (TDDFT); however, Ce L3,2-edge and M5,4-edge XAS were also used to characterize CeCl6(x-) (x = 2, 3). The M5,4-edge XAS spectra were modeled using configuration interaction calculations. The results were evaluated as a function of (1) the lanthanide (Ln) metal identity, which was varied across the series from Ce to Gd, and (2) the Ln oxidation state (when practical, i.e., formally Ce(III) and Ce(IV)). Pronounced mixing between the Cl 3p- and Ln 5d-orbitals (t2g* and eg*) was observed. Experimental results indicated that Ln 5d-orbital mixing decreased when moving across the lanthanide series. In contrast, oxidizing Ce(III) to Ce(IV) had little effect on Cl 3p and Ce 5d-orbital mixing. For LnCl6(3-) (formally Ln(III)), the 4f-orbitals participated only marginally in covalent bonding, which was consistent with historical descriptions. Surprisingly, there was a marked increase in Cl 3p- and Ce(IV) 4f-orbital mixing (t1u* + t2u*) in CeCl6(2-). This unexpected 4f- and 5d-orbital participation in covalent bonding is presented in the context of recent studies on both tetravalent transition metal and actinide hexahalides, MCl6(2-) (M = Ti, Zr, Hf, U).

Bis(imino)pyridine Iron Dinitrogen Compounds Revisited: Differences in Electronic Structure Between Four- and Five-Coordinate Derivatives.

The electronic structures of the four- and five-coordinate aryl-substituted bis(imino)pyridine iron dinitrogen complexes, ((iPr)PDI)FeN(2) and ((iPr)PDI)Fe(N(2))(2) ((iPr)PDI = 2,6-(2,6-(i)Pr(2)-C(6)H(3)-N=CMe)(2)C(5)H(3)N), have been investigated by a combination of spectroscopic techniques (NMR, Mössbauer, X-ray Absorption, and X-ray Emission) and DFT calculations. Homologation of the imine methyl backbone to ethyl or isopropyl groups resulted in the preparation of the new bis(imino)pyridine iron dinitrogen complexes, ((iPr)RPDI)FeN(2) ((iPr)RPDI = 2,6-(2,6-(i)Pr(2)-C(6)H(3)-N=CR)(2)C(5)H(3)N; R = Et, (i)Pr), that are exclusively four coordinate both in the solid state and in solution. The spectroscopic and computational data establish that the ((iPr)RPDI)FeN(2) compounds are intermediate spin ferrous derivatives (S(Fe) = 1) antiferromagnetically coupled to bis(imino)pyridine triplet diradical dianions (S(PDI) = 1). While this ground state description is identical to that previously reported for ((iPr)PDI)Fe(DMAP) (DMAP = 4-N,N-dimethylaminopyridine) and other four-coordinate iron compounds with principally σ-donating ligands, the d-orbital energetics determine the degree of coupling of the metal-chelate magnetic orbitals resulting in different NMR spectroscopic behavior. For ((iPr)RPDI)Fe(DMAP) and related compounds, this coupling is strong and results in temperature independent paramagnetism where a triplet excited state mixes with the singlet ground state via spin orbit coupling. In the ((iPr)RPDI)FeN(2) family, one of the iron singly occupied molecular orbitals (SOMOs) is essentially d(z(2)) in character resulting in poor overlap with the magnetic orbitals of the chelate, leading to thermal population of the triplet state and hence temperature dependent NMR behavior. The electronic structures of ((iPr)RPDI)FeN(2) and ((iPr)PDI)Fe(DMAP) differ from ((iPr)PDI)Fe(N(2))(2), a highly covalent molecule with a redox noninnocent chelate that is best described as a resonance hybrid between iron(0) and iron(II) canonical forms as originally proposed in 2004.

Prediction of high-valent iron K-edge absorption spectra by time-dependent Density Functional Theory

In recent years, a number of high-valent iron intermediates have been identified as reactive species in iron-containing metalloproteins. Inspired by the interest in these highly reactive species, chemists have synthesized Fe(IV) and Fe(V) model complexes with terminal oxo or nitrido groups, as well as a rare example of an Fe(VI)-nitrido species. In all these cases, X-ray absorption spectroscopy has played a key role in the identification and characterization of these species, with both the energy and intensity of the pre-edge features providing spectroscopic signatures for both the oxidation state and the local site geometry. Here we build on a time-dependent DFT methodology for the prediction of Fe K- pre-edge features, previously applied to ferrous and ferric complexes, and extend it to a range of Fe(IV), Fe(V) and Fe(VI) complexes. The contributions of oxidation state, coordination environment and spin state to the spectral features are discussed. These methods are then extended to calculate the spectra of the heme active site of P450 Compound II and the non-heme active site of TauD. The potential for using these methods in a predictive manner is highlighted.

Oxidation and reduction of bis(imino)pyridine iron dinitrogen complexes: evidence for formation of a chelate trianion.

Oxidation and reduction of the bis(imino)pyridine iron dinitrogen compound, ((iPr)PDI)FeN(2) ((iPr)PDI = 2,6-(2,6-(i)Pr(2)-C(6)H(3)-N═CMe)(2)C(5)H(3)N) has been examined to determine whether the redox events are metal or ligand based. Treatment of ((iPr)PDI)FeN(2) with [Cp(2)Fe][BAr(F)(4)] (BAr(F)(4) = B(3,5-(CF(3))(2)-C(6)H(3))(4)) in diethyl ether solution resulted in N(2) loss and isolation of [((iPr)PDI)Fe(OEt(2))][BAr(F)(4)]. The electronic structure of the compound was studied by SQUID magnetometry, X-ray diffraction, EPR and zero-field (57)Fe Mössbauer spectroscopy. These data, supported by computational studies, established that the overall quartet ground state arises from a high spin iron(II) center (S(Fe) = 2) antiferromagnetically coupled to a bis(imino)pyridine radical anion (S(PDI) = 1/2). Thus, the oxidation event is principally ligand based. The one electron reduction product, [Na(15-crown-5)][((iPr)PDI)FeN(2)], was isolated following addition of sodium naphthalenide to ((iPr)PDI)FeN(2) in THF followed by treatment with the crown ether. Magnetic, spectroscopic, and computational studies established a doublet ground state with a principally iron-centered SOMO arising from an intermediate spin iron center and a rare example of trianionic bis(imino)pyridine chelate. Reduction of the iron dinitrogen complex where the imine methyl groups have been replaced by phenyl substituents, ((iPr)BPDI)Fe(N(2))(2) resulted in isolation of both the mono- and dianionic iron dinitrogen compounds, [((iPr)BPDI)FeN(2)](-) and [((iPr)BPDI)FeN(2)](2-), highlighting the ability of this class of chelate to serve as an effective electron reservoir to support neutral ligand complexes over four redox states.

Electronic Structure Determination of Pyridine N‑Heterocyclic Carbene Iron Dinitrogen Complexes and Neutral Ligand Derivatives

The electronic structures of pyridine N-heterocyclic dicarbene (iPrCNC) iron complexes have been studied by a combination of spectroscopic and computational methods. The goal of these studies was to determine if this chelate engages in radical chemistry in reduced base metal compounds. The iron dinitrogen example (iPrCNC)Fe(N2)2 and the related pyridine derivative (iPrCNC)Fe(DMAP)(N2) were studied by NMR, Mössbauer, and X-ray absorption spectroscopy and are best described as redox non-innocent compounds with the iPrCNC chelate functioning as a classical π acceptor and the iron being viewed as a hybrid between low-spin Fe(0) and Fe(II) oxidation states. This electronic description has been supported by spectroscopic data and DFT calculations. Addition of N,N-diallyl-tert-butylamine to (iPrCNC)Fe(N2)2 yielded the corresponding iron diene complex. Elucidation of the electronic structure again revealed the CNC chelate acting as a π acceptor with no evidence for ligand-centered radicals. This ground state is in contrast with the case for the analogous bis(imino)pyridine iron complexes and may account for the lack of catalytic [2π + 2π] cycloaddition reactivity.

Reactivity and Mössbauer Spectroscopic Characterization of an Fe(IV) Ketimide Complex and Reinvestigation of an Fe(IV) Norbornyl Complex

Thermolysis of Fe(N═C(t)Bu2)4 (1) for 8 h at 50 °C generates the mixed valent Fe(III)/Fe(II) bimetallic complex Fe2(N═C(t)Bu2)5 (2) in moderate yield. Also formed in this reaction are tert-butyl cyanide, isobutane, and isobutylene, the products of ketimide oxidation by the Fe(4+) center. Reaction of 1 with 1 equiv of acetylacetone affords the Fe(III) complex, Fe(N═C(t)Bu2)2(acac) (3), concomitant with formation of bis(tert-butyl)ketimine, tert-butyl cyanide, isobutane, and isobutylene. In addition, the Mössbauer spectra of 1 and its lower-valent analogues [Li(12-crown-4)2][Fe(N═C(t)Bu2)4] (5) and [Li(THF)]2[Fe(N═C(t)Bu2)4] (6) were recorded. We also revisited the chemistry of Fe(1-norbornyl)4 (4) to elucidate its solid-state molecular structure and determine its Mössbauer spectrum, for comparison with that recorded for 1.

Spectroscopic and computational investigation of actinium coordination chemistry

Actinium-225 is a promising isotope for targeted-α therapy. Unfortunately, progress in developing chelators for medicinal applications has been hindered by a limited understanding of actinium chemistry. This knowledge gap is primarily associated with handling actinium, as it is highly radioactive and in short supply. Hence, AcIII reactivity is often inferred from the lanthanides and minor actinides (that is, Am, Cm), with limited success. Here we overcome these challenges and characterize actinium in HCl solutions using X-ray absorption spectroscopy and molecular dynamics density functional theory. The Ac–Cl and Ac–OH2O distances are measured to be 2.95(3) and 2.59(3) Å, respectively. The X-ray absorption spectroscopy comparisons between AcIII and AmIII in HCl solutions indicate AcIII coordinates more inner-sphere Cl1– ligands (3.2±1.1) than AmIII (0.8±0.3). These results imply diverse reactivity for the +3 actinides and highlight the unexpected and unique AcIII chemical behaviour.

Synthesis, electronic structure and reactivity of bis(imino)pyridine iron carbene complexes: evidence for a carbene radical

The reactivity of the disubstituted diazoalkane, N2CPh2 with a family of bis(imino)pyridine iron dinitrogen complexes was examined. For the most sterically protected member of the series, (iPrPDI)Fe(N2)2 (iPrPDI = 2,6-(2,6-iPr2C6H3NCMe)2C5H3N), an S = 1 iron diazoalkane complex was obtained and structurally characterized. Reducing the size of the 2,6-aryl substituents to ethyl or methyl groups resulted in isolation of bis(imino)pyridine iron carbene complexes. Magnetic measurements established S = 1 ground states, demonstrating rare examples of iron carbenes in a weak ligand field. Electronic structure determination using metrical parameters from X-ray diffraction as well as Mossbauer, XAS and computational data established high-spin iron(II) compounds engaged in antiferromagnetic coupling with redox-active bis(imino)pyridine and carbene radicals.