S. Kondrashev

Results with the electron cyclotron resonance charge breeder for the C252f fission source project (Californium Rare Ion Breeder Upgrade) at Argonne Tandem Linac Accelerator Systema)

The construction of the Californium Rare Ion Breeder Upgrade, a new radioactive beam facility for the Argonne Tandem Linac Accelerator System (ATLAS), is nearing completion. The facility will use fission fragments from a 1 Ci (252)Cf source; thermalized and collected into a low-energy particle beam by a helium gas catcher. In order to reaccelerate these beams, an existing ATLAS electron cyclotron resonance (ECR) ion source was redesigned to function as an ECR charge breeder. Thus far, the charge breeder has been tested with stable beams of rubidium and cesium achieving charge breeding efficiencies of 9.7% into (85)Rb(17+) and 2.9% into (133)Cs(20+).

Development of electron beam ion source charge breeder for rare isotopes at Californium Rare Isotope Breeder Upgrade.

Recently, the Californium Rare Isotope Breeder Upgrade (CARIBU) to the Argonne Tandem Linac Accelerator System (ATLAS) was commissioned and became available for production of rare isotopes. Currently, an electron cyclotron resonance ion source is used as a charge breeder for CARIBU beams. To further increase the intensity and improve the purity of neutron-rich ion beams accelerated by ATLAS, we are developing a high-efficiency charge breeder for CARIBU based on an electron beam ion source (EBIS). The CARIBU EBIS charge breeder will utilize the state-of-the-art EBIS technology recently developed at Brookhaven National Laboratory (BNL). The electron beam current density in the CARIBU EBIS trap will be significantly higher than that in existing operational charge-state breeders based on the EBIS concept. The design of the CARIBU EBIS charge breeder is nearly complete. Long-lead components of the EBIS such as a 6-T superconducting solenoid and an electron gun have been ordered with the delivery schedule in the fall of 2011. Measurements of expected breeding efficiency using the BNL Test EBIS have been performed using a Cs(+) surface ionization ion source for external injection in pulsed mode. In these experiments we have achieved ∼70% injection∕extraction efficiency and breeding efficiency into the most abundant charge state of ∼17%.

EBIS charge breeder for CARIBU

A high-efficiency charge breeder based on an Electron Beam Ion Source (EBIS) is being developed by the ANL Physics Division to increase the intensity and improve the purity of accelerated radioactive ion beams. A wide variety of low-energy neutron-rich ion beams are produced by the Californium Rare Isotope Breeder Upgrade (CARIBU) for the Argonne Tandem Linac Accelerator System (ATLAS). These beams will be charge-bred by an EBIS charge breeder to a charge-to-mass ratio (q/A) ≥ 1/7 and accelerated by ATLAS to energies of about 10 MeV/u. The assembly of the CARIBU EBIS charge breeder except the injection/extraction beam lines has been completed. This summer we started electron beam commissioning of the EBIS. The first results on electron beam extraction, transport from the electron gun to a high power electron collector are presented and discussed.

Design of the injection beamline for the Californium Rare Isotope Breeder Upgrade electron beam ion source charge breeder.

The design of the ion injection line connecting the electron beam ion source (EBIS) charge breeder and the Californium Rare Isotope Breeder Upgrade radio frequency quadrupole cooler-buncher at the Argonne Tandem Linear Accelerator System was investigated with particle tracking simulations. The injection line was configured to accommodate several differential pumping sections, individual optical components were optimized to minimize emittance growth, and the ion beam parameters were matched with the EBIS electron beam acceptance to minimize losses upon injection.

Experimental results on multi-charge-state lebt approach

A multi-charge-state injector for a high-intensity heavy-ion linac is being developed at ANL. The injector consists of an all-permanent magnet ECR ion source [1], a 100 kV platform and a Low Energy Beam Transport (LEBT). The latter comprises two 60-degree bending magnets, electrostatic triplets and beam diagnostics stations. At present the injector system allows us to accelerate all ion species up to qtimes100 keV total kinetic energy, where q is the charge state of an ion. In the current installation, the accelerating tube is followed by a 90deg magnet and a beam measurement station [2]. Recently we studied the production of metal ion beams using an oven technique and high intensity light ion beams from the ECR ion. A pepper pot emittance meter based on a scintillator screen has been developed and tested with various CW ion beams. It was found that a Csl (Tl) crystal has a high sensitivity for a variety of ion species from protons to heavy ions with the current densities even below 1 muA/cm2.

Direct plasma injection scheme in accelerators.

The idea of direct plasma injection scheme (DPIS) was proposed in 2000. This new technique has been studied and proven to accelerate intense ion beams. To provide medium mass ions with highly charged states, small tabletop solid lasers were used for plasma production. Based on the measured plasma properties, aluminum and carbon ions were accelerated with more than 60 mA of current. The next experiments will use an radio frequency quadrupole designed for q/m=1/6 and explore beam productions using targets up to silver, and future work will explore production up to uranium. The DPIS has been established and is ready to be used with various accelerators which require pulsed high current, high charge state ion beams.

Polarized 3He++ Ion Source for RHIC and an EIC

The capability of accelerating a polarized

Direct plasma injection scheme in accelerators (invited)

^3

Direct plasma injection scheme in accelerators (invited)a)

He ion beam in RHIC would demonstrate an effective polarized neutron beam for the study of new high-energy QCD studies of nucleon structure. This development would be particularly beneficial for the future plans of an Electron Ion Collider (EIC), which could use a polarized

Development and beam test of a continuous wave radio frequency quadrupole accelerator

^3