S. Pina

Natural-based nanocomposites for bone tissue engineering and regenerative medicine : a review

Tissue engineering and regenerative medicine has been providing exciting technologies for the development of functional substitutes aimed to repair and regenerate damaged tissues and organs. Inspired by the hierarchical nature of bone, nanostructured biomaterials are gaining a singular attention for tissue engineering, owing their ability to promote cell adhesion and proliferation, and hence new bone growth, compared with conventional microsized materials. Of particular interest are nanocomposites involving biopolymeric matrices and bioactive nanosized fillers. Biodegradability, high mechanical strength, and osteointegration and formation of ligamentous tissue are properties required for such materials. Biopolymers are advantageous due to their similarities with extracellular matrices, specific degradation rates, and good biological performance. By its turn, calcium phosphates possess favorable osteoconductivity, resorbability, and biocompatibility. Herein, an overview on the available natural polymer/calcium phosphate nanocomposite materials, their design, and properties is presented. Scaffolds, hydrogels, and fibers as biomimetic strategies for tissue engineering, and processing methodologies are described. The specific biological properties of the nanocomposites, as well as their interaction with cells, including the use of bioactive molecules, are highlighted. Nanocomposites in vivo studies using animal models are also reviewed and discussed.

An in vitro biological and anti-bacterial study on a sol–gel derived silver-incorporated bioglass system

OBJECTIVES The purpose of this study was to evaluate the in vitro antibacterial and biological activity of silver-incorporated bioactive glass system SiO2-CaO-P2O5-Ag2O (AgBG). The bacteriostatic and bactericidal properties of this new quaternary glass system along with the ternary sol-gel glass system SiO2-CaO-P2O5 (BG) have been studied using Escherichia coli as a test micro-organism. The AGBG system thus appears to be a promising material for dental applications, since similar effects might be produced on a film of bacteria and mucous that grows on the teeth. METHODS The SiO2-CaO-P2O5-Ag2O and SiO2-CaO-P2O5 glass systems were synthesized by the sol-gel technique and characterized for their physicho-chemical properties. The antibacterial activity and biological properties were evaluated by determining the minimum inhibitory concentrations (MICs). Release of Ag+ into the culture medium was measured by inductively coupled plasma (ICP) analysis. RESULTS The in vitro antibacterial action of the SiO2-CaO-P2O5-Ag2O was compared with that of its ternary counterpart glass system. The concentrations of Ag-bioglass, in the range of 0.02-0.20 mg of Ag-bioglass per millilitre of culture medium, were found to inhibit the growth of these bacteria. The Ag-bioglass not only acts bacteriostatically but it also elicited a rapid bactericidal action. A complete bactericidal effect was elicited in the early stages of the incubation at Ag-bioglass concentration of 20 mg/ml and the ternary glass system had no effect on bacterial growth or viability. The antibacterial action of Ag-bioglass was exclusively attributed to the leaching of Ag+ ions from the glass matrix. SIGNIFICANCE One of the major advantages of incorporating silver ions into a gel glass system is that the porous glass matrix can allow for controlled sustained delivery of the antibacterial agent to dental material, used even under anaerobic conditions such as deep in the periodontal pocket. This glass system also provides long-term action required for systems which are constantly at risk of microbial contamination.

Synthesis and structural characterization of strontium- and magnesium-co-substituted β-tricalcium phosphate

The synthesis of five different Sr(2+)- and Mg(2+)-co-substituted beta-tricalcium phosphate (beta-TCP) has been obtained by heating the calcium-deficient apatites above 800 degrees C. With the investigated concentrations of Sr(2+) and Mg(2+) from the present study, no additional phases other than beta-TCP have been detected. The synthesized powders have been characterized by X-ray diffraction, Fourier transform infrared spectrometry, elemental analysis and Rietveld refinement studies. The co-substitution of Sr(2+) and Mg(2+) in the beta-TCP has resulted in the formation of crystalline beta-TCP at hexagonal setting (space group R3c). The reduction of lattice a- and c-axis parameters with the combined substitution of Sr(2+) and Mg(2+) in the beta-TCP has been found evident from the present results. Sr(2+) has been found occupying the Ca(1,2,3,4) sites and Mg(2+) was found at the sixfold coordinated Ca(5) site of beta-TCP structure.

Synthesis, mechanical and biological characterization of ionic doped carbonated hydroxyapatite/β-tricalcium phosphate mixtures

The influence of ionic substituents in calcium phosphates intended for bone and tooth replacement biomedical applications is an important research topic, owing to the essential roles played by trace elements in biological processes. The present study investigates the mechanical and biological evaluation of ionic doped hydroxyapatite/β-tricalcium phosphate mixtures which have been prepared by a simple aqueous precipitation method. Heat treating the resultant calcium phosphates in a carbonated atmosphere led to the formation of ionic doped carbonated hydroxyapatite/β-tricalcium phosphate mixtures containing the essential ions of biological apatite. The structural analysis determined by Rietveld refinement confirmed the presence of hydroxyapatite as the main phase, together with a considerable amount of β-tricalcium phosphate. Such phase assemblage is essentially due to the influence of substituted ions during synthesis. The results from mechanical tests proved that carbonate substitutions are detrimental for the mechanical properties of apatite-based ceramics. In vitro proliferation assays of osteoblastic-like cells (MC3T3-E1 cell line) to powders revealed that carbonate incorporation can either delay or accelerate MC3T3 proliferation, although reaching the same proliferation levels as control cells after 2 weeks in culture. Further, the powders enable pre-osteoblastic differentiation in a similar manner to control cells, as indirectly measured by ALP activity and Type-I collagen medium secretion.

Newly developed Sr-substituted α-TCP bone cements

New bone cements made of Sr-substituted brushite-forming alpha-tricalcium phosphate (alpha-TCP) were prepared and characterized in the present work. The quantitative phase analysis and structural refinement of the starting powders and of hardened cements were performed by X-ray powder diffraction and the Rietveld refinement technique. Isothermal calorimetry along with setting time analysis allowed a precise tracing of the setting process of the pastes. The pastes showed exothermic reactions within the first 10-15 min after mixing and further release of heat after about 1h. An apatitic phase formed upon immersion of the hardened cements in simulated body fluid for 15 and 30 days due to the conversion of brushite into apatite confirming their in vitro mineralization capability. The compressive strength of the wet cement specimens decreased with increasing curing time, being higher in the case of Sr-substituted CPC. The results suggest that the newly developed Sr-substituted brushite-forming alpha-TCP cements show promise for uses in orthopaedic and trauma surgery such as in filling bone defects.

Deposition of bioactive glass-ceramic thin-films by RF magnetron sputtering

Abstract Thin films of bioactive glass-ceramics have been deposited on titanium and silicon substrates by RF magnetron sputtering. The crystalline phases and the microstructure of the films have been characterized using XRD and SEM analysis; the main phases present were calcium–magnesium phosphates, enstatite and forsterite. The adhesion of the films on titanium has been examined by pull-off testing; the adhesion strength for as-deposited films was around 40 MPa, but after crystallization the strength dropped to about half this value due to the presence of cracks. Samples kept in simulated body fluid showed an apatite-like layer, suggesting that the films are bioactive.

Brushite-Forming Mg-, Zn- and Sr-Substituted Bone Cements for Clinical Applications

Calcium phosphate cements have been in clinical use for the last 10 years. Their most salient features include good biocompatibility, excellent bioactivity, self-setting characteristics, low setting temperature, adequate stiffness, and easy shaping to accomodate any complicated geometry. They are commonly used in filling bone defects and trauma surgeries as mouldable paste-like bone substitute materials. Substitution of trace elements, such as Mg, Sr and Zn ions, into the structure of calcium phosphates is the subject of widespread investigation nowadays, because of their impending role in the biological process. Subtle differences in composition and structure of these materials may have a profound effect on their in vivo behaviour. Therefore, the main goal of this paper is to provide a simple, but comprehensive overview of the present achievements relating to brushite-forming cements doped with Mg, Zn and Sr, and to identify new developments and trends. In particular, the influence of ionic substitution on the chemical, physical and biological properties of these materials is discussed.

Effects of Mn-doping on the structure and biological properties of β-tricalcium phosphate

Doping calcium phosphates with trace elements that exist in bone tissues is beneficial in terms of cell-material interactions and in vivo performance of the bone grafts made thereof. Manganese (Mn) is an essential element for normal growth and metabolism of bone tissues, but studies reporting the effects of Mn-doping calcium phosphates are scarce. The present study investigated the influence of Mn-doping on the structure, morphology and biological properties of β-tricalcium phosphate [β-Ca3(PO4)2] (β-TCP). Mn-doped (MnTCP) powders, with Mn contents varying from 0 to 10 mol%, were obtained through an aqueous precipitation method followed by heat treatment at 800 °C. The successful incorporation of Mn into β-TCP structure was proved through quantitative X-ray diffraction (XRD) phase analysis coupled with structural Rietveld refinement. Increasing Mn concentrations led to decreasing trends of a- and c-axis lattice parameters, and Mn-doping also significantly affected the morphology of β-TCP powders. In vitro proliferation and differentiation assays of MC3T3-E1 osteoblastic-like cells, grown in the presence of the powders, revealed that the biological benefits of Mn-doped β-TCP are limited to lower Mn incorporation levels and potentially related to their surface microstructure. The Mn1-βTCP composition revealed the best set of bioactivity properties, potentially a good candidate for future applications of β-TCP materials in osteoregeneration.

Bioresorbable Plates and Screws for Clinical Applications: A Review

Bioresorbable implants are being widely used for fracture fixation in orthopaedic surgery and the market is expanding rapidly worldwide. Bioresorbable materials slowly dissolve in the human body, such that a second operation to remove the synthetic material is not needed. Bioresorbable implants have expanded the armamentarium of the surgeon, especially in the field of sports medicine. Interference screws, plates, pins, suture anchors, meniscal repair implants, and simple fracture fixation implants are the most commonly used resorbable implants for anterior cruciate ligament reconstruction, shoulder surgery, meniscal repair, and fracture care. However, many clinicians continue to rely on metal fixation, mainly due to the high mechanical strength and to the complications reported with some of the available resorbable implant materials. The goal of the present paper is to present an overview on the available resorbable materials and their applications with a particular focus on new developments and trends in the field.

Pulsed laser deposition of SiO2 - P2O5 - CaO - MgO glass coatings on titanium substrates

Thin films of bioactive glass-ceramic have been deposited on titanium substrates by the Pulsed Laser Deposition (PLD) technique under different experimental conditions. The effect of parameters such as deposition pressure and temperature of heat treatments was studied. The microstructure and the crystalline phases of the coatings were characterized using SEM, EDX and XRD analysis; the phases present were titanium oxides, calcium magnesium silicates and phosphates. The adhesion of the as-deposited films has been examined by scratch tests. The interfacial adhesion of the coatings was better when the deposition was performed at low pressure. Samples were immersed in simulated body fluid (SBF), and a calcium-phosphate precipitate was observed on the surface of less crystallized samples, suggesting that there is some relationship between surface reactivity and crystallinity.