Sachio Miyasaka

Classification system of frontal sinus patterns by radiography. Its application to identification of unknown skeletal remains

Frontal sinuses of Japanese skulls were radiographically examined from the view point of identifying individuals. The system of classification of sinus was proposed, basing on the area size, the bilateral asymmetry, the superiority of side, the outline of upper borders, the partial septa and the supraorbital cells. Frontal sinus patterns could be divided into above 20,000 possible combinations by combining the class numbers in each classification item described above. The frontal sinus pattern of a given person was formulated as a code number which was determined by arranging the class numbers in each classification item as serial numbers. This identification system by the frontal sinus pattern should allow one to characterize each person. The application of this identification system to an actual criminal case was also described.

Microscopical study on estimation of time since death in skeletal remains

For the purpose of estimating time since death in skeletal remains, postmortem changes in human compact bones were examined by microradiography and electron microscopy. The UV-fluorescence of the peripheral zone of compact bone was also examined by microscopic spectrophotometry. Microradiographic examination revealed no morphological changes in bones left in the open air for long periods, except one of 15 years since death. In bones left in the soil, vacuoles of 5-10 microns diameter, which contained a honeycomb-like structure formed by small vacuoles of 0.5-1 microns diameter, were found in the peripheral zone of the substantia compacta approximately 5 years since death, and in bones of 6 years or more, this change extended to the mid-zone. In bones left in the sea for 4-5 years, vacuoles of 5-10 microns diameter were observed in the outer peripheral zone of the substantia compacta. The relative intensity of UV-fluorescence in bones dwindled with time since death and the correlation coefficient was considerably high.

Computer-assisted facial image identification system using a 3-D physiognomic range finder

This system consists of a 3-D physiognomic range finder and a computer-assisted facial image superimposition unit. The 3-D range finder is composed of a detector for measuring facial surface and its control computer. The detector has two sinusoidal grating projection devices and two CCD cameras. The computer-assisted facial image superimposition unit consists of a host computer including a proprietary software, a flat surface color display and a color image scanner for inputting 2-D facial images of a criminal. The 3-D facial shape and texture of a suspect is obtained by using the range finder. To make the comparison between the 3-D facial image and the 2-D facial image, the 3-D facial image is first reproduced on a display of the host computer from a MO disk and then the 2-D facial image is taken with the color image scanner and reproduced on the display. The 3-D facial image is exactly adjusted to match the orientation and size of the 2-D facial image under the fine framework mode, and then the fine framework mode of 3-D facial image is converted to the fine texture image. The shape and positional relationships of facial components between the 3-D and 2-D facial images are examined by the fade-out or wipe image mode. The distance between the selected two points and angle among the selected three points on the 3-D and 2-D facial images are automatically measured for the assessment of anthropometrical data between both images. For evaluating the fit between the anthropometrical points on the 3-D and 2-D facial images, the reciprocal point-to-point difference between both images is compared.

Computer-assisted skull identification system using video superimposition

This system consists of two main units, namely a video superimposition system and a computer-assisted skull identification system. The video superimposition system is comprised of the following five parts: a skull-positioning box having a monochrome CCD camera, a photo-stand having a color CCD camera, a video image mixing device, a TV monitor and a videotape recorder. The computer-assisted skull identification system is composed of a host computer including our original application software, a film recorder and a color printer. After the determination of the orientation and size of the skull to those of the facial photograph using the video superimposition system, the skull and facial photograph images are digitized and stored within the computer, and then both digitized images are superimposed on the monitor. For the assessment of anatomical consistency between the digitized skull and face, the distance between the landmarks and the thickness of soft tissue of the anthropometrical points are semi-automatically measured on the monitor. The wipe images facilitates the comparison of positional relationships between the digitized skull and face. The software includes the polynomial functions and Fourier harmonic analysis for evaluating the match of the outline such as the forehead and mandibular line in both the digitized images.

Histological estimation of age at death using microradiographs of humeral compact bone

The purpose of this study is to develop an age estimating method for skeletal remains using microradiographs of compact bone. Compact bones of the humerus were collected from 40 Japanese males ranging from 23 to 80 years of age. Microradiographs taken from cross-sections were histomorphometrically examined by using an image analyzer. Histological parameters used in this study included 10 items, that is, osteon number, double-zoned osteon number, type II osteon number, low-density osteon number, osteon fragment number, resorption space number, total and average osteon area, and total and average Haversian canal area. The osteon fragment number showed the highest correlation coefficient with advancing age (r = 0.786). The measurement data obtained from 10 histological parameters were subjected to multiple regression analysis for producing multiple regression equations for age estimation. In practice, 8 histological parameters were selected for the equation and its multiple correlation coefficient and standard error of estimate were 0.903 and 6.1, respectively.

Evaluation of anatomical consistency in craniofacial superimposition images

Using 52 skulls in forensic cases, the anatomical consistency of cranio-facial superimposition images was investigated for evaluating the validity in personal identification by the superimposition method. In 35 out of 52 cases the unknown skull was positively identified as the missing person by matching of the outline and anatomical relation in skull and face images taken from frontal, oblique and lateral directions. The unknown skull in two cases was exclusive of the presumed person since the outline of the skull was not anatomically consistent with that of the face. In the remaining 15 cases, the skull in question was examined using only a frontal face photograph of the missing person and matched with it because of the lack of other photographs taken from different angles, giving a probable identification. From our practical examination, it is stated that the outline from the trichion to the gnathion in the lateral or oblique view is the preferable portion for personal identification, and the cranio-facial super-imposition method is reliable for individualization when two or more facial photographs taken from different angles are used in the examination.

Discriminant functions for sex estimation of modern Japanese skulls.

The purpose of this study is to generate a set of discriminant functions in order to estimate the sex of modern Japanese skulls. To conduct the analysis, the anthropological measurement data of 113 individuals (73 males and 40 females) were collected from recent forensic anthropological test records at the National Research Institute of Police Science, Japan. Birth years of the individuals ranged from 1926 to 1979, and age at death was over 19 years for all individuals. A total of 10 anthropological measurements were used in the discriminant function analysis: maximum cranial length, cranial base length, maximum cranial breadth, maximum frontal breadth, basion-bregmatic height, upper facial breadth, bizygomatic breadth, bicondylar breadth, bigonial breadth, and ramal height. As a result, nine discriminant functions were established. The classification accuracy ranged from 79.0 to 89.9% when the measurements of the 113 individuals were substituted into the established functions, from 77.8 to 88.1% when a leave-one-out cross-validation procedure was applied to the data, and from 86.7 to 93.0% when the measurements of 50 new individuals (25 males and 25 females), unrelated to the establishment of the discriminant functions, were used.

Quantitative analysis of amplifiable DNA in tissues exposed to various environments using competitive PCR assays

Competitive PCR assays were established for the mitochondrial DNA hypervariable region I and the human amelogenin locus. Using these assays, the copy numbers of DNA participating in PCR (amplifiable DNA) were quantified in tissues exposed to different environments. Human ribs, skin and nails were left in three exposure conditions (in the open air, in soil and in water). The amounts of amplifiable DNA in these tissues were quantified during a time period of up to two months. The amount of amplifiable DNA was well preserved in hard tissues (ribs and nails) regardless of the exposure conditions, whereas the soft tissues immersed in water showed a rapid decrease in amplifiable DNA. Strong PCR inhibition was observed in the DNA extracts obtained from buried bones. This phenomenon was clearly identified from an amplification failure of the internal standards in the competitive PCR. A preliminary examination to identify the PCR inhibitor suggested that the soil itself contributed to the inhibition. In addition, the amounts of amplifiable DNA in case samples were also investigated.

The ABO blood grouping of a minute hair sample by the immunohistochemical technique.

The unlabeled antibody (PAP) immunoperoxidase technique was applied to the ABO blood grouping of human scalp hairs. Hair samples were subjected to longitudinal- or cross-sectioning, thus obtaining suitable samples for subsequent immunostaining. The immunostaining was carried out using rabbit anti-A and anti-B sera as the primary antibodies. With this technique, the group-specific staining which is revealed as a dark brown precipitate was clearly observed within the medullae of the hair shaft, and depending on the presence or absence of these precipitates, respective blood groups of unknown hair samples were determined. At the hair root, on the other hand, positive stainings were observed not only in medullary cells but also in some cortical cells of the keratogenous zone. From the present study, it can be safely said that this technique is of practical use for the ABO blood grouping from a minute (less than 3 mm) hair sample.

Application of computerised correction method for optical distortion of two-dimensional facial image in superimposition between three-dimensional and two-dimensional facial images

The applicability of computerised correction of optical distortion to two-dimensional (2D)/three-dimensional (3D) facial image superimposition was investigated. Two-dimensional (2D) facial images of 10 male volunteers were taken with a commercially available closed circuit device (CCD) camera (reference camera) at four areas of the lens field: the centre, top, upper right and right. Correction was made by computer by calculating differences vis-à-vis the co-ordinates of dots on a test chart. Discrepancies in facial outlines between the 3D and 2D images decreased following correction in all lens fields and were below the threshold for true positive. The correction method was also tested using an actual surveillance camera and video recorder installed in a bank. The method was found to be effective for the correction of facial images, especially those taken in the top and right lens fields. Since the total error (observed error) remaining after correction appeared close to the random error (real error), systematic error was thought to be minimised by correction. Therefore, the present method was thought to display high fidelity, and could be useful for supplementary examination of conventional superimposition.