Sahba Talebi Fard

Silicon photonic micro-disk resonators for label-free biosensing.

Silicon photonic biosensors are highly attractive for multiplexed Lab-on-Chip systems. Here, we characterize the sensing performance of 3 µm TE-mode and 10 µm dual TE/TM-mode silicon photonic micro-disk resonators and demonstrate their ability to detect the specific capture of biomolecules. Our experimental results show sensitivities of 26 nm/RIU and 142 nm/RIU, and quality factors of 3.3x10(4) and 1.6x10(4) for the TE and TM modes, respectively. Additionally, we show that the large disks contain both TE and TM modes with differing sensing characteristics. Finally, by serializing multiple disks on a single waveguide bus in a CMOS compatible process, we demonstrate a biosensor capable of multiplexed interrogation of biological samples.

Design and fabrication of SOI micro-ring resonators based on sub-wavelength grating waveguides.

Standard silicon photonic strip waveguides offer a high intrinsic refractive index contrast; this permits strong light confinement, leading to compact bends, which in turn facilitates the fabrication of devices with small footprints. Sub-wavelength grating (SWG) based waveguides can allow the fabrication of low loss devices with specific, engineered optical properties. The combination of SWG waveguides with optical micro-resonators can offer the possibility of achieving resonators with properties different from the traditional SOI rings. One important property that SWG rings can offer is decreased light confinement in the waveguide core; this improves the resonators sensitivity to changes in the cladding refractive index, making the rings ideal for refractive index sensing applications. In this paper, we present the design and experimental characterization of SWG based rings realized on SOI chips without upper cladding (permitting their use as sensors). The fabricated rings offer quality factors in the range of ~1k-6k, depending on SWG parameters. Based on the comparison of experimental and simulated data we expect sensitivities exceeding 383 nm/RIU in water and 270 nm/RIU in air, showing excellent potential for use in sensing applications.

Ultra-compact, flat-top demultiplexer using anti-reflection contra-directional couplers for CWDM networks on silicon

Wavelength-division-multiplexing (WDM) networks with wide channel grids and bandwidths are promising for low-cost, low-power optical interconnects. Wide-bandwidth, single-band (i.e., no free-spectral range) add-drop filters have been developed on silicon using anti-reflection contra-directional couplers with out-of-phase Bragg gratings. Using such filter components, we demonstrate a 4-channel, coarse-WDM demultiplexer with flat passbands of up to 13 nm and an ultra-compact size of 1.2 × 10(-3) mm(2).

Sub-wavelength grating components for integrated optics applications on SOI chips.

In this paper we demonstrate silicon on insulator (SOI) sub-wavelength grating (SWG) optical components for integrated optics and sensing. Light propagation in SWG devices is studied and realized with no cladding on top of the waveguide. In particular, we focused on SWG bends, tapers and directional couplers, all realized with compatible geometries in order to be used as building blocks for more complex integrated optics devices (interferometers, switches, resonators, etc.). Fabricated SWG tapers for TE and TM polarizations are described; they allow for connecting SWG devices to regular strip waveguides with loss lower than 1 dB per taper. Our SWG directional coupler presents a very compact design and a negligible wavelength dependence of its crossover length (and as a consequence of its coupling coefficient, κ), over a 40 nm bandwidth. This wavelength flatten response represents a bandwidth enhancement with respect to standard directional couplers (made using strip or rib waveguides), in particular for the TE mode. SWG bends are demonstrated, their loss dependence on radius is analyzed, and fabricated bends have a loss in the range 0.8-1.6 dB per 90 degrees bend. Simulated and measured results show promise for large-scale fabrication of complex optical devices and high sensitivity sensors based on SWG waveguides with engineered optical properties, tailored to specific applications.

A silicon photonic biosensor using phase-shifted Bragg gratings in slot waveguide

We present a novel silicon photonic biosensor using phase-shifted Bragg gratings in a slot waveguide. The optical field is concentrated inside the slot region, leading to efficient light-matter interaction. The Bragg gratings are formed with sidewall corrugations on the outside of the waveguide, and a phase shift is introduced to create a sharp resonant peak within the stop band. We experimentally demonstrate a high sensitivity of 340 nm/RIU measured in salt solutions and a high quality factor of 1.5 × 10⁴, enabling a low intrinsic limit of detection of 3 × 10⁻⁴ RIU. Furthermore, the silicon device was fabricated by a CMOS foundry, facilitating high-volume and low-cost production. Finally, we demonstrate the devices ability to interrogate specific biomolecular interactions, resulting in the first of its kind label-free biosensor.

Performance of ultra-thin SOI-based resonators for sensing applications

This work presents simulation and experimental results of ultra-thin optical ring resonators, having larger Evanescent Field (EF) penetration depths, and therefore larger sensitivities, as compared to conventional Silicon-on-Insulator (SOI)-based resonator sensors. Having higher sensitivities to the changes in the refractive indices of the cladding media is desirable for sensing applications, as the interactions of interest take place in this region. Using ultra-thin waveguides (<100 nm thick) shows promise to enhance sensitivity for both bulk and surface sensing, due to increased penetration of the EF into the cladding. In this work, the designs and characterization of ultra-thin resonator sensors, within the constraints of a multi-project wafer service that offers three waveguide thicknesses (90 nm, 150 nm, and 220 nm), are presented. These services typically allow efficient integration of biosensors with on-chip detectors, moving towards the implementation of lab-on-chip (LoC) systems. Also, higher temperature stability of ultra-thin resonator sensors were characterized and, in the presence of intentional environmental (temperature) fluctuations, were compared to standard transverse electric SOI-based resonator sensors.

Optical Absorption Glucose Measurements Using 2.3-

Continuous glucose monitoring has been shown to help diabetes mellitus patients stabilize their glucose levels, leading to improved patient health. One promising technique for monitoring blood glucose concentration is to use optical absorption spectroscopy. This letter proposes the use of thermally tunable 2.3-mum vertical-cavity surface-emitting lasers to obtain blood absorption spectra. The partial least squares technique is used to determine the glucose concentration from the spectra obtained in aqueous glucose solutions.

\mu

Diabetes Mellitus is a common chronic disease that has become a public health issue. Continuous glucose monitoring improves patient health by stabilizing the glucose levels. Optical methods are one of the painless and promising methods that can be used for blood glucose predictions. However, having accuracies lower than what is acceptable clinically has been a major concern. Using lasers along with multivariate techniques such as Partial Least Square (PLS) can improve glucose predictions. This research involves investigations for developing a novel optical system for accurate glucose predictions, which leads to the development of a small, low power, implantable optical sensor for diabetes patients.

m Vertical-Cavity Semiconductor Lasers

Silicon photonics biosensors continue to be an area of active research, showing the potential to revolutionize Labon- Chip applications ranging from environmental monitoring to medical diagnostics. As near-infrared light propagates through nano-scale silicon wires on an SOI chip, a portion of the light resides outside the waveguide and interacts with biomolecules and the biological matrix on the waveguide’s surface. This capability makes silicon photonics an ideal platform for label-free biosensing. Additionally, the SOI platform is compatible with standard CMOS fabrication processes, facilitating manufacturing at the economies of scale offered by today’s foundries. In this paper, we describe our efforts to improve the performance of SOI-based biosensors—specifically, TE and TM mode microring resonators, thin waveguide resonators, sub-wavelength grating resonators, as well as strip and slot Bragg gratings. We compare device performance in terms of sensitivity, intrinsic limit of detection, and their potential for biosensing applications in Lab-on-Chip systems.

Optical glucose monitoring using vertical cavity surface emitting lasers (VCSELs)

Silicon photonics is going trough a terrific expansion driven by several applications, from chip wiring to integrated sensors and telecommunications. Some applications, e.g. intra and inter chip connections and sensing, require long parallel waveguides for wiring or for connecting grating couplers (GCs) to devices situated in sensing micro-channels. In well packed photonics chips there are often long wiring waveguides parallel for several mm, so loss can be caused by light coupled back and forth between them (cross-talk), by scattering, wall roughness, mode mismatch, etc. This work aims to investigate cross-talk for long parallel waveguides, and to propose methods to reduce cross-talk loss when high integration density is required. We have designed and fabricated about 200 testing structures exploiting e-beam on silicon on insulator (SOI) chip, in order to test several parameters and to find out dominant loss mechanisms. All devices have been tested and measured using an automatic optical bench, in the wavelength range between 1500-1600 nm. Achieved results are promising, since they allow for comparing cross-talk for short as well as long interaction lengths (up to 5 mm), different waveguide width pairs, several separation distances, and for TE and TM polarization. For smaller gaps, having not symmetric pair of waveguides is very beneficial, since it results in a lower power coupling, e.g. about 20/14 dB of crosstalk reduction for TE/TM waveguides after 5 mm of propagation and gap of 0.5 μm. This can be very useful for the design of integrated photonics chips requiring high-density packaging of devices and waveguides.