Jonas Flueckiger

Focusing sub-wavelength grating couplers with low back reflections for rapid prototyping of silicon photonic circuits

We demonstrate fully-etched fiber-waveguide grating couplers with sub-wavelength gratings showing high coupling efficiency as well as low back reflections for both transverse electric (TE) and transverse magnetic (TM) modes. The power reflection coefficients for the TE and TM modes have been significantly suppressed to -16.2 dB and -20.8 dB, respectively. Focusing grating lines have also been used to reduce the footprint of the design. Our sub-wavelength grating couplers for the TE and TM modes show respective measured insertion losses of 4.1 dB and 3.7 dB with 1-dB bandwidths of 30.6 nm (3-dB bandwidth of 52.3 nm) and 47.5 nm (3-dB bandwidth of 81.5 nm), respectively.

Silicon photonic micro-disk resonators for label-free biosensing.

Silicon photonic biosensors are highly attractive for multiplexed Lab-on-Chip systems. Here, we characterize the sensing performance of 3 µm TE-mode and 10 µm dual TE/TM-mode silicon photonic micro-disk resonators and demonstrate their ability to detect the specific capture of biomolecules. Our experimental results show sensitivities of 26 nm/RIU and 142 nm/RIU, and quality factors of 3.3x10(4) and 1.6x10(4) for the TE and TM modes, respectively. Additionally, we show that the large disks contain both TE and TM modes with differing sensing characteristics. Finally, by serializing multiple disks on a single waveguide bus in a CMOS compatible process, we demonstrate a biosensor capable of multiplexed interrogation of biological samples.

Design and fabrication of SOI micro-ring resonators based on sub-wavelength grating waveguides.

Standard silicon photonic strip waveguides offer a high intrinsic refractive index contrast; this permits strong light confinement, leading to compact bends, which in turn facilitates the fabrication of devices with small footprints. Sub-wavelength grating (SWG) based waveguides can allow the fabrication of low loss devices with specific, engineered optical properties. The combination of SWG waveguides with optical micro-resonators can offer the possibility of achieving resonators with properties different from the traditional SOI rings. One important property that SWG rings can offer is decreased light confinement in the waveguide core; this improves the resonators sensitivity to changes in the cladding refractive index, making the rings ideal for refractive index sensing applications. In this paper, we present the design and experimental characterization of SWG based rings realized on SOI chips without upper cladding (permitting their use as sensors). The fabricated rings offer quality factors in the range of ~1k-6k, depending on SWG parameters. Based on the comparison of experimental and simulated data we expect sensitivities exceeding 383 nm/RIU in water and 270 nm/RIU in air, showing excellent potential for use in sensing applications.

Microfabricated formaldehyde gas sensors.

Formaldehyde is a volatile organic compound that is widely used in textiles, paper, wood composites, and household materials. Formaldehyde will continuously outgas from manufactured wood products such as furniture, with adverse health effects resulting from prolonged low-level exposure. New, microfabricated sensors for formaldehyde have been developed to meet the need for portable, low-power gas detection. This paper reviews recent work including silicon microhotplates for metal oxide-based detection, enzyme-based electrochemical sensors, and nanowire-based sensors. This paper also investigates the promise of polymer-based sensors for low-temperature, low-power operation.

Ultra-compact, flat-top demultiplexer using anti-reflection contra-directional couplers for CWDM networks on silicon

Wavelength-division-multiplexing (WDM) networks with wide channel grids and bandwidths are promising for low-cost, low-power optical interconnects. Wide-bandwidth, single-band (i.e., no free-spectral range) add-drop filters have been developed on silicon using anti-reflection contra-directional couplers with out-of-phase Bragg gratings. Using such filter components, we demonstrate a 4-channel, coarse-WDM demultiplexer with flat passbands of up to 13 nm and an ultra-compact size of 1.2 × 10(-3) mm(2).

Universal grating coupler design

A universal design methodology for grating couplers based on the silicon-on-insultator platform is presented in this paper. Our design methodology accomodates various etch depths, silicon thickness (e.g., 220 nm, 300 nm), incident angles, and cladding materials (e.g., silicon oxide or air), and has been verified by simulations and measurement results. Further more, the design methodology presented can be applied to a wide range, from 1260 nm to 1675 nm, of wavelengths.

Silicon photonic resonator sensors and devices

Silicon photonic resonators, implemented using silicon-on-insulator substrates, are promising for numerous applications. The most commonly studied resonators are ring/racetrack resonators. We have fabricated these and other resonators including disk resonators, waveguide-grating resonators, ring resonator reflectors, contra-directional grating-coupler ring resonators, and racetrack-based multiplexer/demultiplexers. While numerous resonators have been demonstrated for sensing purposes, it remains unclear as to which structures provide the highest sensitivity and best limit of detection; for example, disc resonators and slot-waveguide-based ring resonators have been conjectured to provide an improved limit of detection. Here, we compare various resonators in terms of sensor metrics for label-free bio-sensing in a micro-fluidic environment. We have integrated resonator arrays with PDMS micro-fluidics for real-time detection of biomolecules in experiments such as antigen-antibody binding reaction experiments using Human Factor IX proteins. Numerous resonators are fabricated on the same wafer and experimentally compared. We identify that, while evanescent-field sensors all operate on the principle that the analytes refractive index shifts the resonant frequency, there are important differences between implementations that lie in the relationship between the optical field overlap with the analyte and the relative contributions of the various loss mechanisms. The chips were fabricated in the context of the CMC-UBC Silicon Nanophotonics Fabrication course and workshop. This yearlong, design-based, graduate training program is offered to students from across Canada and, over the last four years, has attracted participants from nearly every Canadian university involved in photonics research. The course takes students through a full design cycle of a photonic circuit, including theory, modelling, design, and experimentation.

Sub-wavelength grating for enhanced ring resonator biosensor

While silicon photonic resonant cavities have been widely investigated for biosensing applications, enhancing their sensitivity and detection limit continues to be an area of active research. Here, we describe how to engineer the effective refractive index and mode profile of a silicon-on-insulator (SOI) waveguide using sub-wavelength gratings (SWG) and report on its observed performance as a biosensor. We designed a 30 μm diameter SWG ring resonator and fabricated it using Ebeam lithography. Its characterization resulted in a quality factor, Q, of 7 · 103, bulk sensitivity Sb = 490 nm/RIU, and system limit of detection sLoD = 2 · 10-6 RIU. Finally we employ a model biological sandwich assay to demonstrate its utility for biosensing applications.

Sub-wavelength grating components for integrated optics applications on SOI chips.

In this paper we demonstrate silicon on insulator (SOI) sub-wavelength grating (SWG) optical components for integrated optics and sensing. Light propagation in SWG devices is studied and realized with no cladding on top of the waveguide. In particular, we focused on SWG bends, tapers and directional couplers, all realized with compatible geometries in order to be used as building blocks for more complex integrated optics devices (interferometers, switches, resonators, etc.). Fabricated SWG tapers for TE and TM polarizations are described; they allow for connecting SWG devices to regular strip waveguides with loss lower than 1 dB per taper. Our SWG directional coupler presents a very compact design and a negligible wavelength dependence of its crossover length (and as a consequence of its coupling coefficient, κ), over a 40 nm bandwidth. This wavelength flatten response represents a bandwidth enhancement with respect to standard directional couplers (made using strip or rib waveguides), in particular for the TE mode. SWG bends are demonstrated, their loss dependence on radius is analyzed, and fabricated bends have a loss in the range 0.8-1.6 dB per 90 degrees bend. Simulated and measured results show promise for large-scale fabrication of complex optical devices and high sensitivity sensors based on SWG waveguides with engineered optical properties, tailored to specific applications.

A silicon photonic biosensor using phase-shifted Bragg gratings in slot waveguide

We present a novel silicon photonic biosensor using phase-shifted Bragg gratings in a slot waveguide. The optical field is concentrated inside the slot region, leading to efficient light-matter interaction. The Bragg gratings are formed with sidewall corrugations on the outside of the waveguide, and a phase shift is introduced to create a sharp resonant peak within the stop band. We experimentally demonstrate a high sensitivity of 340 nm/RIU measured in salt solutions and a high quality factor of 1.5 × 10⁴, enabling a low intrinsic limit of detection of 3 × 10⁻⁴ RIU. Furthermore, the silicon device was fabricated by a CMOS foundry, facilitating high-volume and low-cost production. Finally, we demonstrate the devices ability to interrogate specific biomolecular interactions, resulting in the first of its kind label-free biosensor.