Saisunee Liawruangrath

Simultaneous determination of tolperisone and lidocaine by high performance liquid chromatography.

A reversed phase high performance liquid chromatographic (RP-HPLC) method for the simultaneous determination of tolperisone (TP) and lidocaine (LD) has been developed. The drugs were separated on a column (4.60 x 250 mm(2)) Spherisorb ODS (5 microm) using 5.5% triethylamine in 70/30 v/v acetonitrile/water as mobile phase 0.7 ml min(-1)and UV detection at 254 nm. The detection limits for Tolperisone hydrochloride (TP-HCl) and lidocaine hydrochloride (LD-HCl) were 0.20 ng/20 microl and 100 ng/20 microl and the quantitation limits were 0.50 ng/20 microl and 250 ng/20 microl, respectively. Linear calibration curves over the ranges of 1-10, 10-100 and 150-500 microg ml(-1) for TP-HCl and 10-500 microg ml(-1) for LD-HCl were established. Different calibration slopes were found for TP probably owing to changes in refractive index due to increase in TP concentration. The average recoveries of the added TP in the samples (TP-HCl tablets and injection liquid). A solutions spiked with standard TP-HCl were 99.9 and 99.7% with the RSD (n=11) of 0.66 and 0.67%, respectively. The average recovery of the added LD in the sample (injection) spiked with standard LD-HCl was 98.9% with the RSD (n=11) of 0.59%. The proposed method has been applied to the determination of TP-HCl and LD-HCl in commercial products available in Thailand. Comparative determination of TP by UV spectrophotometry and LD by colorimetry were also carried out. The results obtained by both methods were in good agreement of those obtained by the proposed method verified by using t-test. The proposed RP-HPLC method is simple, accurate, reproducible and suitable for routine analysis.

Extrusion printed polymer structures: A facile and versatile approach to tailored drug delivery platforms

A novel extrusion printing system was used to create drug delivery structures wherein dexamethasone-21-phosphate disodium salt (Dex21P) was encapsulated within a biodegradable polymer (PLGA) and water soluble poly(vinyl alcohol) (PVA) configurations. The ability to control the drug release profile through the spatial distribution of drug within the printed 3-dimensional structures is demonstrated. The fabricated configurations were characterised by optical microscopy and SEM to evaluate surface morphology. The results clearly demonstrate the successful encapsulation of dexamethasone within a laminated PLGA:PVA structure. The resulting drug release profiles from the structures show a two stage release profile with distinctly different release rates and minimal initial burst release observed. Dexamethasone release was monitored over a 4-month period. This approach clearly demonstrates that the extrusion printing technique provides a facile and versatile approach to fabrication of novel drug delivery platforms.

Design and fabrication of a low-cost flow-through cell for the determination of acetaminophen in pharmaceutical formulations by flow injection cyclic voltammetry

A low-cost electrochemical flow-through cell is designed and fabricated to use in conjunction with a flow injection (FI) system. This detector cell used a centrosymmetric radial flow thin-layer geometry with a stainless steel auxiliary electrode and a reference electrode (Ag/AgCl) without a salt bridge. The 5H pencil lead electrode used as a working electrode in the home-made cell is an extremely inexpensive electrode which performs as well as the expensive commercial glassy carbon electrode. Optimum conditions for determining acetaminophen using the proposed FI manifold was investigated. Appropriate volume of sample and/or standard solution containing acetaminophen in pH 2.2 Mcllvaine buffer solution was injected into the proposed FI system and mixed with the flowing stream of supporting electrolyte (pH 2.2 Mcllvaine buffer solution) at an optimum flow rate of 1 mlmin(-1). The cyclic voltammograms were recorded over the potential range from -0.5 to +2.0 V with a scan rate of 40 mVs(-1). Linear calibration curve over the range of 0.1-5 mM acetaminophen was established with the regression equation Y=3.68X+1.0157 (r(2)=0.9964). The recommended method has been applied to the determination of acetaminophen in 8 commercial pharmaceutical preparations. The percentage recoveries of the spiked acetaminophen in four tablet samples were ranging from 103 to 112 with the relative standard deviation in the range of 0.1-1.3%.

Ultrasound-enhanced flow injection chemiluminescence for determination of hydrogen peroxide.

A novel ultrasonic flow injection chemiluminescence (FI-CL) manifold for determining hydrogen peroxide (H2O2) has been designed and evaluated. Chemiluminescence obtained from the luminol-H2O2-cobalt(II) reaction was enhanced by applying 120 W of ultrasound for a period of 4 s to the reaction coil in the FI-CL system and this enhancement was verified by comparison with an identical manifold without ultrasound. The system was developed for determining ultra-trace levels of H2O2 and a calibration curve was obtained with a linear portion over the range of 10-200 nmol L(-1) H2O2 (correlation coefficient 0.9945). The detection limit (3sigma) and the quantification limit (LOQ) were found to be 1 x 10(-9) and 3.3 x 10(-9) mol L(-1) respectively and the relative standard deviation was 1.37% for 2 x 10(-7) mol L(-1) H2O2 (n = 10). The method was applied to the determination of trace amounts of H2O2 in purified water and natural water samples without any special pre-treatments.

Constituents of the essential oil from aerial parts of Chromolaena odorata from Thailand

The chemical composition of the essential oil from the aerial parts of Chromolaena odorata, collected from Phitsanulok, Thailand was analyzed by means of GC-(FID) and GC-MS. Twenty-two constituents were identified. The major components were pregeijerene (17.6%), germacrene D (11.1%), α-pinene (8.4%), β-caryophyllene (7.3%), vestitenone (6.5%), β-pinene (5.6%), δ-cadinene (4.9%), geijerene (3.1%), bulnesol (2.9%), and trans-ocimene (2.2%).

Bioaccumulation and determination of lead using treated-Pennisetum-modified carbon paste electrode

The present work describes the development and application of a carbon paste electrode modified by treated-Pennisetum setosum for the determination of lead(II) by anodic stripping differential pulse voltammetry. Most experiments were performed using the preconcentration/voltammetry/regeneration scheme. The resulting modified electrode offers a preferential uptake of lead(II) from solutions. Operational conditions, such as percentage treated-Pennisetum loading in the carbon paste, pH of electrolyte solution, ionic strength, preconcentration time, voltammetric waveform and interference are characterized and optimized to allow quantitative determination of lead. The electrode surface can be regenerated by immersing the modified electrode in 0.05 mol l(-1) hydrochloric acid for 2 min. For the measurement step, the optimum conditions were acetate buffer pH 5.0 and 0.60 ionic strength with the preconcentration time of 5 min. The modified electrode contained 10% (w/w) treated-Pennisetum. The detection limit (3sigma) was 0.01 mg l(-1) Pb(II). For 16 preconcentration/measurement/renewal cycles, the responses could be reproduced with a 5.39% relative standard deviation. This method has been be successfully applied to the determination of lead(II) in natural water samples using standard addition method.

A simple and green analytical method for determination of iron based on micro flow analysis.

A simple, inexpensive and reagent-less colorimetric micro flow analysis (microFA) system was implemented in a polymethyl methacrylate (PMMA) micro fluidic manifold. A T-shaped micro channel on a PMMA chip was fabricated by laser ablation and topped with molded polydimethylsiloxane (PDMS). The fabricated microFA system was integrated with the optical components as detector and applied to the determination of iron in water samples. It is based on the measurement of Fe(III)-nitroso-R salt complex at 720 nm formed by the reaction between Fe(III) and nitroso-R salt in an acetate buffer solution pH 5. The proposed microFA consumed very small amount of reagent and sample, it released waste of less than 2.0 mL h(-1). The relative standard deviation (R.S.D.) was less than 2% (n=11) with the recovery of 98.7+/-0.12 (n=5). The linear range for the determination of iron in water samples was over the range of 0.05-4.0 microg mL(-1) with a correlation coefficient (r(2)) of 0.9994. The limit of detection (3sigma) and limit of quantitation (10sigma) were 0.021 microg mL(-1) and 0.081 microg mL(-1), respectively with a sample throughput of 40 h(-1).

Sequential injection spectrophotometric determination of zinc(II) in pharmaceuticals based on zinc(II)-PAN in non-ionic surfactant medium

A sequential injection analysis (SIA) spectrophotometric method for the determination of trace amounts of zinc(II) with 1-(2-pyridylazo)-2-naphthol (PAN) is described. The method is based on the measurement of absorbance of the zinc(II)-PAN chelate solubilized with a non-ionic surfactant, Triton X-100, no extraction procedure is required in the proposed method, yielding a pink colored complex at pH 9.5 with absorption maximum at 553nm. The SIA parameters that affect the signal response have been optimized in order to get the better sensitivity and minimum reagent consumption. A linear relationship between the relative peak height and concentration was obtained in the concentration range of 0.1-1.0microg ml(-1). The limit of detection (LOD, defined as 3sigma) and limit of quantification (LOQ, defined as 10sigma) were 0.02 and 0.06microg ml(-1), respectively. The sample throughput about 40 samples/h was obtained. The repeatability were 1.32 and 1.24% (n=10) for 0.1 and 0.5microg ml(-1), respectively. The proposed method was successfully applied to the assay of zinc(II) in three samples of multivitamin tablets. The results were found to be in good agreement with those obtained by flame atomic absorption spectrophotometric method and with the claimed values by the manufactures. The t-test showed no significant difference at 95% confidence level.

Flow injection spectrophotometric determination of europium using chlortetracycline.

A flow injection (FI) spectrophotometric determination of europium (III) is described, based on the complexation between europium (III), and chlortetracycline (CTC) in a Tris-buffer pH 8.0 medium. The resulting yellow-coloured complex is measured at its absorption maximum of 400 nm after 100 mul of sample or standard solution containing europium (III) are injected into the merged streams of CTC and Tris-buffer solutions. Optimum conditions for determining mug amounts of europium (III) are achieved by univariate method. Various types of reactors are also investigated. It is shown that the use of a single bead string reactor gives rise to the enhancement of peak height. A linear calibration curve over the range of 0.10-0.60 mug ml(-1) europium (III) is established with the regression equation (n=6) Y=34.93X+0.01 and the correlation coefficient of 0.9994 is obtained. A detection limit (3sigma) of 0.01 mug ml(-1) of europium (III) and the relative standard deviation (R.S.D.) of 4.32% for determining 1.0 mug ml(-1) of europium (III) (n=7) are obtained. The recommended method has been applied to the quantitation of europium (III) in spiked water and stream sediment samples with average recoveries of 99.9 and 97.5%, respectively. The sampling rate is found to be 85 h(-1).

Simultaneous micellar LC determination of lidocaine and tolperisone.

A micellar liquid chromatography (MLC) procedure was developed for the simultaneous separation and determination of lidocaine hydrochloride (LD HCl) and tolperisone hydrochloride (TP HCl) using a short-column C18 (12.5 mm x 4.6 mm, 5 microm), sodium dodecyl sulfate (SDS) with a small amount of isopropanol, and diode array detector. The optimum conditions for the simultaneous determination of both drugs were 0.075 mol l(-1) SDS-7.5% (v/v) isopropanol with a flow rate of 0.7 ml min(-1) and detection at 210 nm. The LOD (2S/N) of LD HCl was 0.73 ng 20 microl(-1), whereas that of TP HCl was 1.43 ng 20 microl(-1). The calibration curves for LD HCl and TP HCl were linear over the ranges 0.125-500 microg ml(-1) (r(2)=0.9999) and 1.00-500 microg ml(-1) (r(2)=0.9997), respectively. The %recoveries of both drugs were in the range 98-103% and the %RSD values were less than 2. The proposed method has been successfully applied to the simultaneous determination of TP HCl and LD HCl in various pharmaceutical preparations.