Samir Cherkaoui

Simultaneous analysis of some amphetamine derivatives in urine by nonaqueous capillary electrophoresis coupled to electrospray ionization mass spectrometry

A nonaqueous capillary electrophoresis method, coupled to UV and electrospray mass spectrometry (ESI-MS), is described for the simultaneous analysis of Ecstasy and other related derivatives. Several electrophoretic and ESI-MS parameters were systematically investigated, such as electrolyte nature and concentration, organic solvent and sheath liquid compositions, nebulization gas pressure and drying gas flow-rate. The best results were achieved with an acetonitrile-methanol (80:20, v/v) mixture containing 25 mM ammonium formate and 1 M formic acid, an applied voltage of 30 kV and a separation temperature of 15 degrees C. Under optimized CE-ESI-MS conditions, separation of the investigated drugs was performed in less than 6 min, with a high efficiency. Method precision based on migration time and peak area was determined and the limits of detection, which depend on the tested compound, were established between 20 and 70 ng ml(-1) in the selected ion monitoring mode. Finally, the described method was successfully applied to the analysis of amphetamines in urine after a liquid-liquid extraction.

Simultaneous stereoselective analysis of tramadol and its main phase I metabolites by on-line capillary zone electrophoresis–electrospray ionization mass spectrometry

On-line combination of partial filling capillary electrophoresis and electrospray ionization mass spectrometry was demonstrated for the simultaneous enantioseparation of tramadol and its main phase I metabolites. The partial filling technique was efficient at avoiding MS contamination by the chiral selector. Different experimental factors were investigated, including the chiral selector nature and concentration, plug length as well as the separation temperature. The best enantioseparation of the investigated compounds was achieved with a coated polyvinyl alcohol capillary and a 40 mM ammonium acetate buffer, pH 4.0, adding sulfobutyl ether beta-cyclodextrin (2.5 mg/ml) as the chiral selector. The charged cyclodextrin not only allowed enantioseparation of tramadol and its metabolites, but also improved the selectivity of compounds with the same molecular mass. Finally, CE-electrospray ionisation-MS was successfully applied to the stereoselective analysis of tramadol and its main metabolites in plasma after a simple liquid-liquid extraction.

On-line capillary electrophoresis-electrospray mass spectrometry for the stereoselective analysis of drugs and metabolites

The on‐line combination of partial‐filling capillary electrophoresis and electrospray ionization mass spectrometry was demonstrated for the enantioseparation of pharmaceutical drugs and metabolites, namely amphetamines, methadone, venlafaxine and selected tropane alkaloids. The partial‐filling technique proved to be a suitable and efficient approach to avoid mass spectrometry (MS) source contamination, as well as signal suppression due to nonvolatile additives. To achieve chiral separation, various chiral selectors were applied, including neutral and particularly negatively charged cyclodextrins. Because of the countercurrent contribution, charged cyclodextrins were found more suitable for the on‐line MS detection of separated enantiomers. Hyphenation of capillary electrophoresis (CE) with mass spectrometry was found appropriate for the stereoselective analysis of methadone in real serum samples. Moreover, the use of MS in the selected ion monitoring mode resulted in a very high selectivity, as well as improved sensitivity compared to UV detection. Finally, with atropine as a model compound, the quantitative performances of the method were evaluated and showed high sensitivity, as well as good repeatability in terms of migration time and peak area ratio.

Experimental designs to investigate capillary electrophoresis-electrospray ionization-mass spectrometry enantioseparation with the partial-filling technique.

An experimental design approach is described to evaluate the main electrophoretic parameters involved in the enantioseparation of pharmaceuticals by capillary electrophoresis (CE) coupled to electrospray ionization‐mass spectrometry (ESI‐MS). For all experiments, the partial‐filling technique was applied to avoid the chiral selector entering in the mass spectrometer ion source with a negative effect on the electrospray performance. To carry out enantioseparation, a volatile buffer constituted of 20 mM ammonium acetate at pH 4.0, and a polyvinyl alcohol‐coated capillary were used. Methadone was employed as the model compound and three different cyclodextrins (CDs), namely sulfobutyl ether‐β‐CD, carboxymethylated‐β‐CD and hydroxypropyl‐β‐CD, were selected in order to study the countercurrent process. Two different experimental designs were chosen: (i) a full‐factorial design to examine the effects and significance of the investigated factors, and (ii) a central composite face‐centered design to establish the mathematical model of the selected responses in function of experimental factors. The chiral selector concentration, percentage of the capillary filled with the chiral selector, and drying gas nebulization pressure were three relevant factors taken into consideration. For each CD, the methadone enantiomeric resolution, apparent selectivity, and migration time of the second enantiomer were established as responses. The latter were systematically related to experimental parameters with the help of multiple linear regression. It is noteworthy that the behaviour was different in function of the chiral selector charge. Results revealed that the nebulization pressure involved in the electrospray process and the CD concentration had a significant effect on the enantiomeric resolution, while the effect of the separation zone length was less pronounced. Finally, response surfaces were drawn from the mathematical model and experimental conditions were selected to allow a robust determination of methadone enantiomers by CE‐MS.

Enantioseparation of atropine by capillary electrophoresis using sulfated β-cyclodextrin: application to a plant extract.

A capillary zone electrophoresis (CZE) method, with sulfated beta-CD as chiral selector, was optimized by means of an experimental design for the enantioseparation of atropine. In this study, a central composite design was used and the following factors were varied simultaneously: buffer concentration, buffer pH and sulfated beta-CD concentration. The resolutions between littorine and its positional isomer ((-)-hyoscyamine) and between atropine enantiomers, as well as the separation time and generated current were established as responses. A model was obtained for each response by linear multiple regression of a second-degree mathematical expression. The most favorable conditions were determined by maximizing the resolution between atropine enantiomers and by setting the other responses at threshold values. Successful results were obtained with a 55 mM phosphate buffer at pH 7 in the presence of 2.9 mM sulfated-beta-CD at 20 degrees C and 20 kV. Under these optimized conditions, a baseline separation of littorine and atropine enantiomers was achieved in less than 5 min. Finally, the method allowed the enantiomeric separation of atropine in a pharmaceutical formulation and was also found to be suitable for the enantiomeric purity evaluation of (-)-hyoscyamine in plant extracts, in relation with the extraction procedure. It was demonstrated that supercritical fluid extraction induced less racemization than classical liquid-solid extraction procedures.

Capillary electrophoresis-diode array detection — electrospray mass spectrometry for the analysis of selected tropane alkaloids in plant extracts

Capillary zone electrophoresis, coupled to UV and interfaced with electrospray ionization mass spectrometry (ESI‐MS), is described for the simultaneous analysis of hyoscyamine and scopolamine. On‐line UV detection occurred at 22 cm from the inlet of the capillary and ESI‐MS monitoring was performed along the entire length of the capillary (85 cm). An alkaline solution of 40 mM ammonium acetate at pH 8.5 was suitable for the analysis of the alkaloids under consideration. Under the optimized conditions, including CE and ESI‐MS parameters, the two alkaloids were resolved within a short time and with very high sensitivity. The differentiation of hyoscyamine and its positional isomer littorine, commonly encountered in plant material, is also presented using up‐front collision‐induced dissociation. Finally, the developed method was applied to the analysis of these alkaloids in Belladonna leaf extract and in Datura candida x D. aurea hairy root extract.

Non-aqueous capillary electrophoresis with diode array and electrospray mass spectrometric detection for the analysis of selected steroidal alkaloids in plant extracts.

Nonaqueous capillary electrophoresis coupled to UV detection is described for the separation and determination of steroidal alkaloids. After optimization of electrophoretic parameters, including the electrolyte nature and the organic solvent composition, a reliable separation of solasodine and solanidine was achieved in a methanol-acetonitrile (20:80, v/v) mixture containing 25 mM ammonium acetate and 1 M acetic acid. For quantitative purposes, a fused-silica capillary with a bubble cell was used and detection was performed at low wavelength (195 nm). Method performances, including migration time and peak area reproducibility, linearity, sensitivity and accuracy, were also evaluated. The method was applied to determine solasodine in Solanum elaeagnifolium berries and Solanum sodomaeum leaves and seeds. To further improve sensitivity in the analysis of solasodine-related compounds, solanidine, demissidine and tomatidine, the developed method was interfaced with electrospray ionization mass spectrometry. In the case of solasodine, the detection limit was estimated at 3 microg/ml for NACE-UV and at 0.05 microg/ml for NACE-MS, in the selected ion-monitoring mode.

Development and robustness testing of a nonaqueous capillary electrophoresis method for the analysis of nonsteroidal anti-inflammatory drugs.

Nine non steroidal anti-inflammatory drugs were simultaneously separated by nonaqueous capillary electrophoresis with a methanol-acetonitrile (40:60, v/v) mixture containing 20 mM ammonium acetate. The effect of solvent composition, electrolyte nature and concentration on the electrophoretic behavior of the selected drugs was systematically studied. Investigated electrolytes were ammonium, lithium and sodium acetate. Modification of the solvent and/or the electrolyte composition was found to alter the migration order of the pharmaceutical drugs. Finally, to assess method robustness, three sensitive electrophoretic parameters as well as their interactions were evaluated using a full factorial design at two levels.

Nonaqueous capillary electrophoresis-electrospray-mass spectrometry for the analysis of fluoxetine and its related compounds

The potential of nonaqueous capillary electrophoresis was investigated for the simultaneous separation of fluoxetine hydrochloride, its meta‐isomer, and other related compounds. The resolution of these compounds was compared in aqueous and nonaqueous media. Baseline separation of the studied solutes required a buffer electrolyte solution composed of 25 mM ammonium acetate and 1 M acetic acid in acetonitrile, an applied voltage of 30 kV and a temperature of 20°C. Selectivity was considerably affected by the nature of the solvent (water, methanol, and acetonitrile). Moreover, substituting acetate by formate in the background electrolyte resulted in migration time changes, which were attributed to an ion‐pairing phenomenon. Finally, the method was successfully coupled on‐line with electrospray ionization‐mass spectrometry (ESI‐MS) and allowed significant selectivity and sensitivity enhancement. The effect of ESI‐MS parameters, such as nebulizing gas pressure, sheath liquid composition and flow rate, on resolution and method sensitivity was also discussed.

Simultaneous determination of scopolamine, hyoscyamine and littorine in plants and different hairy root clones of Hyoscyamus muticus by micellar electrokinetic chromatography

Hyoscyamus muticus hairy root clones were established following infection with Agrobacterium rhizogenes strains A4, LBA-9402 and 15834 and with A. tumefaciens strain C58C1pRTGus104. The accumulation of tropane alkaloids hyoscyamine, littorine and scopolamine was evaluated by micellar electrokinetic capillary electrophoresis. Littorine was reported for the first time in these clones as well as in the roots of the intact plant and confirmed by collision induced dissociation-mass spectrometry. Tropane alkaloid content in hairy roots was compared with leaves and roots of normal plants at two vegetative stages. Significant differences appeared between the alkaloid contents of the different clones. In particular, all the hairy root clones and the roots of the intact plant produced 1.5-3 and 4.5-9 times more littorine than scopolamine, respectively. The only exception was clone KB7, carrying the h6h gene, which overproduced scopolamine. The aerial parts of H. muticus plants did not contain any littorine, thus indicating different transportation or translocation mechanisms of the various tropane alkaloids.