Saptaparna Das

Improving Open Circuit Potential in Hybrid P3HT:CdSe Bulk Heterojunction Solar Cells via Colloidal tert-Butylthiol Ligand Exchange

Organic ligands have the potential to contribute to the reduction potential, or lowest unoccupied molecular orbital (LUMO) energy, of semiconductor nanocrystals. Rationally introducing small, strongly binding, electron-donating ligands should enable improvement in the open circuit potential of hybrid organic/inorganic solar cells by raising the LUMO energy level of the nanocrystal acceptor phase and thereby increasing the energy offset from the polymer highest occupied molecular orbital (HOMO). Hybrid organic/inorganic solar cells fabricated from blends of tert-butylthiol-treated CdSe nanocrystals and poly(3-hexylthiophene) (P3HT) achieved power conversion efficiencies of 1.9%. Compared to devices made from pyridine-treated and nonligand exchanged CdSe, the thiol-treated CdSe nanocrystals are found to consistently exhibit the highest open circuit potentials with V(OC) = 0.80 V. Electrochemical determination of LUMO levels using cyclic voltammetry and spectroelectrochemistry suggest that the thiol-treated CdSe nanocrystals possess the highest lying LUMO of the three, which translates to the highest open circuit potential. Steady-state and time-resolved photoluminescence quenching experiments on P3HT:CdSe films provide insight into how the thiol-treated CdSe nanocrystals also achieve greater current densities in devices relative to pyridine-treated nanocrystals, which are thought to contain a higher density of surface traps.

Singlet Fission in a Covalently Linked Cofacial Alkynyltetracene Dimer

Singlet fission is a process in which a singlet exciton converts into two triplet excitons. To investigate this phenomenon, we synthesized two covalently linked 5-ethynyl-tetracene (ET) dimers with differing degrees of intertetracene overlap: BET-X, with large, cofacial overlap of tetracene π-orbitals, and BET-B, with twisted arrangement between tetracenes exhibits less overlap between the tetracene π-orbitals. The two compounds were crystallographically characterized and studied by absorption and emission spectroscopy in solution, in PMMA and neat thin films. The results show that singlet fission occurs within 1 ps in an amorphous thin film of BET-B with high efficiency (triplet yield: 154%). In solution and the PMMA matrix the S1 of BET-B relaxes to a correlated triplet pair (1)(T1T1) on a time scale of 2 ps, which decays to the ground state without forming separated triplets, suggesting that triplet energy transfer from (1)(T1T1) to a nearby chromophore is essential for producing free triplets. In support of this hypothesis, selective excitation of BET-B doped into a thin film of diphenyltetracene (DPT) leads to formation of the (1)(T1T1) state of BET-B, followed by generation of both DPT and BET-B triplets. For the structurally cofacial BET-X, an intermediate forms in <180 fs and returns to the ground state more rapidly than BET-B. First-principles calculations predict a 2 orders of magnitude faster rate of singlet fission to the (1)(T1T1) state in BET-B relative to that of crystalline tetracene, attributing the rate increase to greater coupling between the S1 and (1)(T1T1) states and favorable energetics for formation of the separated triplets.

Symmetry-breaking charge transfer in a zinc chlorodipyrrin acceptor for high open circuit voltage organic photovoltaics.

Low open-circuit voltages significantly limit the power conversion efficiency of organic photovoltaic devices. Typical strategies to enhance the open-circuit voltage involve tuning the HOMO and LUMO positions of the donor (D) and acceptor (A), respectively, to increase the interfacial energy gap or to tailor the donor or acceptor structure at the D/A interface. Here, we present an alternative approach to improve the open-circuit voltage through the use of a zinc chlorodipyrrin, ZCl [bis(dodecachloro-5-mesityldipyrrinato)zinc], as an acceptor, which undergoes symmetry-breaking charge transfer (CT) at the donor/acceptor interface. DBP/ZCl cells exhibit open-circuit voltages of 1.33 V compared to 0.88 V for analogous tetraphenyldibenzoperyflanthrene (DBP)/C60-based devices. Charge transfer state energies measured by Fourier-transform photocurrent spectroscopy and electroluminescence show that C60 forms a CT state of 1.45 ± 0.05 eV in a DBP/C60-based organic photovoltaic device, while ZCl as acceptor gives a CT state energy of 1.70 ± 0.05 eV in the corresponding device structure. In the ZCl device this results in an energetic loss between E(CT) and qV(OC) of 0.37 eV, substantially less than the 0.6 eV typically observed for organic systems and equal to the recombination losses seen in high-efficiency Si and GaAs devices. The substantial increase in open-circuit voltage and reduction in recombination losses for devices utilizing ZCl demonstrate the great promise of symmetry-breaking charge transfer in organic photovoltaic devices.

Symmetry-Breaking Charge Transfer of Visible Light Absorbing Systems: Zinc Dipyrrins

Zinc dipyrrin complexes with two identical dipyrrin ligands absorb strongly at 450–550 nm and exhibit high fluorescence quantum yields in nonpolar solvents (e.g., 0.16–0.66 in cyclohexane) and weak to nonexistent emission in polar solvents (i.e., <10–3, in acetonitrile). The low quantum efficiencies in polar solvents are attributed to the formation of a nonemissive symmetry-breaking charge transfer (SBCT) state, which is not formed in nonpolar solvents. Analysis using ultrafast spectroscopy shows that in polar solvents the singlet excited state relaxes to the SBCT state in 1.0–5.5 ps and then decays via recombination to the triplet or ground states in 0.9–3.3 ns. In the weakly polar solvent toluene, the equilibrium between a localized excited state and the charge transfer state is established in 11–22 ps.

Exploring the energy disposal immediately after bond-breaking in solution: the wavelength-dependent excited state dissociation pathways of para-methylthiophenol

A wavelength-resolved (λpump = 295, 285, 270, and 267 nm) photodissociation study of para-methylthiophenol (p-MePhSH) in ethanol solution has been performed using femtosecond transient absorption (TA) spectroscopy, and the results compared with those from studies of the corresponding photodissociation in cyclohexane solution at 270 nm. Anisotropy spectra are used to identify the electronic character of the initially populated excited state(s). S-H bond fission is found to occur via the dissociative S2(1(1)πσ*) state, which can be populated directly, or by ultrafast nonradiative transitions from the S3(2(1)ππ*) state, or by very efficient tunneling from the S1(1(1)ππ*) state, depending on the excitation wavelength, in line with conclusions from previous gas-phase studies of this same molecular photodissociation (Oliver, T. A. A.; King, G. A.; Tew, D. P.; Dixon R. N.; Ashfold, M. N. R. J. Phys. Chem. A 2012, 116, 12444). p-MePhS radicals are observed on a time scale faster than the instrument response at all wavelengths, but the available time resolution affords a rare opportunity to explore the branching between different electronic states of a product (the à and X̃ states of the p-MePhS radical in this case). The present study provides estimates of this branching in the products formed immediately after the first pass through the conical intersection (CI) between the S2 and S0 states. At 270 nm, for example, we identify a marked population inversion in the radical products, in contrast to the reported gas phase behavior. The finding that the contrast in branching ratio is largest between cyclohexane solution and the gas phase, with ethanol being intermediate, can be rationalized by recognizing the differing distributions of the S-H torsion angle (relative to the ring plane) in a room temperature solution compared with those in a jet-cooled molecular beam. The available time resolution also allows exploration of the electronic quenching of nascent à state radicals as solvent motion encourages recrossing of the S2/S0 CI. The average separation distance, , between the H + p-MePhS products arising in successful dissociation events is seen to increase with decreasing photolysis wavelength. This finding accords with the previous gas phase results, which determined that most of the excess energy following population of the dissociative S2 state (directly, or by ultrafast coupling from the S3 state) is released as product translation, and the expectation that should scale with the total kinetic energy release. The present work also confirms that geminate recombination of the H + p-MePhS products leads not just to reformation of parent p-MePhSH molecules but also to alternative adducts wherein the H atom bonds to the benzene ring. Analysis of the present data and results of high level ab initio calculations together with recent UV-IR pump-probe measurements (Murdock, D.; Harris, S. J.; Karsili, T. N. V.; Greetham, G. M.; Clark, I. P.; Towrie, M.; Orr-Ewing, A. J.; Ashfold, M. N. R. J. Phys. Chem. Lett. 2012, 3, 3715) allows identification of the likely adduct structures.

Photon quenching in InGaN quantum well light emitting devices

This work provides experimental evidence for photon quenching in InGaN and discusses its relevance to efficiency droop problem in InGaN-based light emitters. An equilibrium rate equation model demonstrates that radiative efficiency for this loss mechanism not only has a similar dependence on carrier density as Auger recombination process, but it also possesses the right magnitude making it difficult to distinguish between the two and possibly leading to errors in interpretation. The impact of photon quenching processes on device performance is emphasized by demonstrating loss of efficiency for spectral regions where there is experimental evidence for photon quenching.

Ultrafast Solvation Dynamics and Vibrational Coherences of Halogenated Boron-Dipyrromethene Derivatives Revealed through Two-Dimensional Electronic Spectroscopy

Boron-dipyrromethene (BODIPY) chromophores have a wide range of applications, spanning areas from biological imaging to solar energy conversion. Understanding the ultrafast dynamics of electronically excited BODIPY chromophores could lead to further advances in these areas. In this work, we characterize and compare the ultrafast dynamics of halogenated BODIPY chromophores through applying two-dimensional electronic spectroscopy (2DES). Through our studies, we demonstrate a new data analysis procedure for extracting the dynamic Stokes shift from 2DES spectra revealing an ultrafast solvent relaxation. In addition, we extract the frequency of the vibrational modes that are strongly coupled to the electronic excitation, and compare the results of structurally different BODIPY chromophores. We interpret our results with the aid of DFT calculations, finding that structural modifications lead to changes in the frequency, identity, and magnitude of Franck-Condon active vibrational modes. We attribute these changes to differences in the electron density of the electronic states of the structurally different BODIPY chromophores.

Manipulating Triplet Yield through Control of Symmetry-Breaking Charge Transfer

The efficiency of an organic solar cell depends on the efficacy of exciton diffusion and dissociation processes, and this can be enhanced by reducing the exciton binding energy and increasing the exciton lifetime. Zinc chlorodipyrrin (ZCl) complexes exhibit reduced exciton binding energy due to ultrafast generation of intramolecular charge transfer (ICT) states via symmetry-breaking charge transfer in polar media. This Letter explores the fate of the ICT states using nanosecond transient absorption. In cyclohexane, ZCl undergoes intersystem crossing to produce triplets with ∼8 ns time constant (∼30% yield), and no ICT states are generated. However, in more polar solvents, triplets are generated within 1 ns via ICT state recombination with ∼3 times higher yield than produced via ISC. This high triplet yield in toluene (89%) and acetonitrile (76%) via ICT state recombination is a beneficial pathway to spin-protect the excited-state decay for additional charge generation from triplet excited states.

Absolute polaron yield of donor-acceptor P3HT:fullerene bulk heterojunction composites

Broadband pump-probe spectroscopy over the entire time range (200 fs to 500 ns) relevant to monitor the polaron generation and recombination dynamics were performed on the bulk heterojunction composites of poly (3- hexylthiophene) (P3HT) and poly(3-hexylthiophene-thiophene-diketopyrrolopyrrole) (P3HTT-DPP-10%) with [6,6]- phenyl-C61-butyric acid methyl ester (PCBM) as the acceptor. The modeling of the polaron dynamics with the Debye- Smoluchowski diffusion model provides the charge separation length at the polymer:fullerene interface. Furthermore, the computed polaron yield using the polaron cross-section over the entire time range reveals the amount of photo-generated charges in P3HT:PCBM and P3HTT-DPP-10%:PCBM bulk-heterojunction thin films.