Sara Heimersson

Including pathogen risk in life cycle assessment of wastewater management. 1. Estimating the burden of disease associated with pathogens.

The environmental performance of wastewater and sewage sludge management is commonly assessed using life cycle assessment (LCA), whereas pathogen risk is evaluated with quantitative microbial risk assessment (QMRA). This study explored the application of QMRA methodology with intent to include pathogen risk in LCA and facilitate a comparison with other potential impacts on human health considered in LCA. Pathogen risk was estimated for a model wastewater treatment system (WWTS) located in an industrialized country and consisting of primary, secondary, and tertiary wastewater treatment, anaerobic sludge digestion, and land application of sewage sludge. The estimation was based on eight previous QMRA studies as well as parameter values taken from the literature. A total pathogen risk (expressed as burden of disease) on the order of 0.2-9 disability-adjusted life years (DALY) per year of operation was estimated for the model WWTS serving 28,600 persons and for the pathogens and exposure pathways included in this study. The comparison of pathogen risk with other potential impacts on human health considered in LCA is detailed in part 2 of this article series.

Including Pathogen Risk in Life Cycle Assessment of Wastewater Management. 2. Quantitative Comparison of Pathogen Risk to Other Impacts on Human Health

Resource recovery from sewage sludge has the potential to save natural resources, but the potential risks connected to human exposure to heavy metals, organic micropollutants, and pathogenic microorganisms attract stakeholder concern. The purpose of the presented study was to include pathogen risks to human health in life cycle assessment (LCA) of wastewater and sludge management systems, as this is commonly omitted from LCAs due to methodological limitations. Part 1 of this article series estimated the overall pathogen risk for such a system with agricultural use of the sludge, in a way that enables the results to be integrated in LCA. This article (part 2) presents a full LCA for two model systems (with agricultural utilization or incineration of sludge) to reveal the relative importance of pathogen risk in relation to other potential impacts on human health. The study showed that, for both model systems, pathogen risk can constitute an important part (in this study up to 20%) of the total life cycle impacts on human health (expressed in disability adjusted life years) which include other important impacts such as human toxicity potential, global warming potential, and photochemical oxidant formation potential.

Techno-economic and environmental assessment of sewage sludge wet oxidation.

Today, several technologies and management strategies are proposed and applied in wastewater treatment plants (WWTPs) to minimise sludge production and contamination. In order to avoid a shifting of burdens between different areas, their techno-economic and environmental performance has to be carefully evaluated. Wet oxidation (WO) is an alternative solution to incineration for recovering energy in sewage sludge while converting it to mostly inorganic residues. This paper deals with an experimentation carried out within the EU project “ROUTES”. A mass balance was made for a WWTP (500,000 person equivalents) in which a WO stage for sludge minimisation was considered to be installed. Both bench- and full-scale test results were used. Design of treatment units and estimation of capital and operational costs were then performed. Subsequently, technical and economic aspects were evaluated by means of a detailed methodology which was developed within the ROUTES project. Finally, an assessment of environmental impacts from a life cycle perspective was performed. The integrated assessment showed that for the specific upgrade considered in this study, WO technology, although requiring a certain increase of technical complexity at the WWTP, may contribute to environmental and economic advantages. The paper provides guidance in terms of which aspects need a more thorough evaluation in relation to the specific case in which an upgrade with WO is considered.

Methodological issues in life cycle assessment of mixed-culture polyhydroxyalkanoate production utilising waste as feedstock.

Assessing the environmental performance of emerging technologies using life cycle assessment (LCA) can be challenging due to a lack of data in relation to technologies, application areas or other life cycle considerations, or a lack of LCA methodology that address the specific concerns. Nevertheless, LCA can be a valuable tool in the environmental optimisation in the technology development phase. One emerging technology is the mixed-culture production of polyhydroxyalkanoates (PHAs). PHA production by pure microbial cultures has been developed and assessed in several LCAs during the previous decade. Recent developments within mixed-culture PHA production call for environmental assessment to guide in technology development. Mixed-culture PHA production can use the organic content in wastewater as a feedstock; the production may then be integrated with wastewater treatment (WWT) processes. This means that mixed-culture PHA is produced as a by-product from services in the WWT. This article explores different methodological challenges for LCA of mixed-culture PHA production using organic material in wastewater as feedstock. LCAs of both pure- and mixed-culture PHA production were reviewed. Challenges, similarities and differences when assessing PHA production by mixed- or pure-cultures were identified and the resulting implications for methodological choices in LCA were evaluated and illustrated, using a case study with mixed- and pure-culture PHA model production systems, based on literature data. Environmental impacts of processes producing multiple products or services need to be allocated between the different products or services. Such situations occur both in feedstock production and when the studied system is providing multiple functions. The selection of allocation method is shown to determine the LCA results. The type of data used, for electricity in the energy system, is shown to be important for the results, which indicates, a strong regional dependency of results for systems with electricity use as an environmental hot spot. The importance of assessing water use, an environmental impact not assessed by any of the reviewed studies, is highlighted.

Global and local health burden trade-off through the hybridisation of Quantitative Microbial Risk Assessment and Life Cycle Assessment to aid water management

Life cycle assessment (LCA) and quantitative risk assessment (QRA) are commonly used to evaluate potential human health impacts associated with proposed or existing infrastructure and products. Each approach has a distinct objective and, consequently, their conclusions may be inconsistent or contradictory. It is proposed that the integration of elements of QRA and LCA may provide a more holistic approach to health impact assessment. Here we examine the possibility of merging LCA assessed human health impacts with quantitative microbial risk assessment (QMRA) for waterborne pathogen impacts, expressed with the common health metric, disability adjusted life years (DALYs). The example of a recent large-scale water recycling project in Sydney, Australia was used to identify and demonstrate the potential advantages and current limitations of this approach. A comparative analysis of two scenarios - with and without the development of this project - was undertaken for this purpose. LCA and QMRA were carried out independently for the two scenarios to compare human health impacts, as measured by DALYs lost per year. LCA results suggested that construction of the project would lead to an increased number of DALYs lost per year, while estimated disease burden resulting from microbial exposures indicated that it would result in the loss of fewer DALYs per year than the alternative scenario. By merging the results of the LCA and QMRA, we demonstrate the advantages in providing a more comprehensive assessment of human disease burden for the two scenarios, in particular, the importance of considering the results of both LCA and QRA in a comparative assessment of decision alternatives to avoid problem shifting. The application of DALYs as a common measure between the two approaches was found to be useful for this purpose.

Method for technical, economic and environmental assessment of advanced sludge processing routes

The legislative framework in force in Europe entails restrictive effluent standards for sensitive areas, and quite severe restrictions on the properties of residual sewage sludge, both for landfill disposal and for agricultural use. Several technologies and management strategies have been proposed and applied in wastewater treatment plants to minimise sludge production and contamination. However, their techno-economic and environmental performance has to be carefully evaluated. The ROUTES project, funded within the EU Seventh Framework programme, aims to find new routes for wastewater treatment and sludge management and thereby guide EU members in their future choices. Within this project, the authors have developed and applied a procedure for techno-economic-environmental assessment of new wastewater and sludge processing lines in comparison to reference plants. The reference plants are model conventional plants that experience different types of problems and the new plants are modified plants in which different innovative technologies have been added to solve these problems. The procedure involves a rating of selected technical issues, estimates of operating costs and an assessment of environmental impacts from a life cycle perspective. This paper reports on the procedure and shows examples of results.

Life cycle inventory practices for major nitrogen, phosphorus and carbon flows in wastewater and sludge management systems

PurposeNitrogen, phosphorus and carbon originating from wastewater and sludge can, depending on their partitioning during wastewater treatment, either become available as potential resources or leave as emissions. Several reviews have highlighted the dependence of life cycle assessment (LCA) results on the inventory data. To provide a foundation for future assessments of systems in which resources are utilised from wastewater or sludge, this paper identifies common practice and highlights deficiencies in the selection and quantification of nitrogen, phosphorus and carbon containing flows.MethodsInventories of major direct flows containing nitrogen, phosphorus and carbon in 62 studies on wastewater and sludge management operations have been reviewed. A special focus was put on flows of nitrogen, phosphorus and carbon originating from the wastewater and sludge and on how these are either leaving the system as emissions and hereby contributing to environmental impacts, or how potential resource flows of these elements are accounted for, in particular when sludge is used in agriculture.Results and discussionThe current study shows a large variation between studies regarding what resource and emission flows were included in inventories on wastewater and sludge treatment, the type of data used (primary or secondary data) and, when flows have been modelled rather than measured, how the modelling has been done. Except for nitrogen and phosphorus emissions via the effluent, which were generally quantified using measured data or data modelled to represent the specific situation, direct emissions to air from the water and sludge lines at the wastewater treatment plant were mostly estimated using secondary data, sometimes of poor data quality. In systems where resources were recovered through agricultural application of sludge, studies often credited the system for avoided use of mineral fertiliser, but the considered replacement ratio differed.ConclusionsThe current review identified increased completeness and specificity in the modelling of the evaluated flows as particularly relevant for future studies and highlighted a need for improved transparency of data inventories. The review can be used as a support for LCA analysts in future studies, providing an inventory of common practices and pinpointing deficiencies, and can thereby support more conscious and well-motivated choices as regard which flows to include in assessments and on the quantification of these flows.

Problem or Resource - Why It Is Important For the Environment to Keep Track of Nitrogen, Phosphorus and Carbon in Wastewater and Sludge Management

This paper discusses how the fate of nitrogen, phosphorus and carbon in wastewater and sludge management affects the environmental performance as it may easily be shifted from a resource to a problem and vice versa. The paper explores the impact of some variations in wastewater treatment technology with resulting shifts of elements between forms and media. To this end, life cycle assessment (LCA) results were calculated for a model municipal wastewater treatment plant with primary settling and secondary treatment, and anaerobic digestion of mixed primary and secondary sludge and subsequent use of the sludge in agriculture (baseline scenario). The effect of changing plant operation to increase nitrogen removal and to add also phosphorus control was studied, using data from mass and energy balances. Further, the paper shows that how data for many flows containing nitrogen, phosphorus and carbon is selected in LCA within ranges found in literature may have a large influence on the results. This effect was studied by varying the flows in the baseline scenario between high and low values found in literature. It was shown that LCA results are considerably affected by both considered operational changes and by assumptions on the magnitudes of some flows. The paper argues that more careful consideration of flows of these elements should be made in the operation of wastewater treatment plants and in selection of data in life cycle assessment (LCA) studies.

Life cycle assessment of sludge management with phosphorus utilisation and improved hygienisation in Sweden

To provide input to sewage sludge management strategies that address expected new regulations in terms of hygienisation and phosphorus recovery in Sweden, an environmental life cycle assessment (LCA) was made. The LCA identified environmental hot spots for methods that may permit sludge or phosphorus from sludge to be applied on agricultural land. In particular, thermophilic digestion, pasteurisation, thermal hydrolysis, urea treatment and mono-incineration with phosphorus recovery were compared. In addition, a sludge management system involving drying of sludge before use in forestry was investigated. The results showed that some major impacts are related to large uncertainties, such as those related to emissions from sludge storage. It also showed that large gains can be achieved when products from the systems replace other products, in particular when biogas is used to replace natural gas in vehicles, but also when sludge is used in agriculture and forestry. In general, there are small differences between the sludge management methods. Retaining the sludge matrix to allow for its utilisation in agriculture may conflict with keeping emissions to air and water from the sludge matrix low. It is recommended that any sludge management option minimises emissions from sludge to air and water and that resources are recovered and used, in line with the principles of a circular economy.