Sebastian Hoechel

Thickness distribution of the glenohumeral joint cartilage: a quantitative study using computed tomography.

PurposeAmong late signs like sclerosis, cysts and osteophytes, alteration of cartilage is a common problem in osteoarthritis. To detect abnormal states in the glenohumeral joint, the physiologic distribution of the cartilage thickness must be known, which will allow physicians to better advise patients. High-resolution computed tomography (CT) data in soft tissue kernel provide highly accurate quantitative results and are a useful method to determine the geometrical situation of the glenohumeral joint. The objective of this study was to characterize the distribution of the thickness of the glenohumeral joint cartilage using CT.MethodsTo investigate the distribution of thickness of the joint cartilage, CT images in soft tissue kernel of nine specimens were analyzed using image visualization software. Statistical analysis of the obtained data was performed using the ANOVA test.ResultsResults showed different patterns in the glenoid cavity than in humeral head. Cartilage thickness in all glenoids showed maxima in the inferior and anterior portion, whereas central areas are covered with the thinnest cartilage layer. Maximum cartilage thickness in the humeral head was found in the central and superior parts.ConclusionWe could show that the distribution of cartilage thickness in the glenohumeral joint is not homogenous and that there exist several reproducible patterns. Evaluation of cartilage thickness in the glenohumeral joint is of high interest in basic and clinical research.

Density and strength distribution in the human subchondral bone plate of the patella

PurposeThe aim of this study was to map the strength distribution of the human patella and correlate it to the subchondral bone plate density obtained by means of computed tomographyosteoabsorptiometry (CT-OAM).MethodsMeasurements were performed at 34 standardized points on each patella. The mineralization patterns of the subchondral bone plate of 20 patellae were displayed with the help of CT-OAM. False-coloured distribution patterns for our measurements were generated. The mechanical strength was determined at the same points by indentation testing.ResultsWe showed that neither the density nor the mechanical strength is distributed homogeneously but exhibited regular, reproducible distribution patterns which mirror long-term stress distribution in articular surfaces. A direct correlation was found between both parameters in the subchondral bone plate.ConclusionThe correlation of density and mechanical strength makes CT-OAM a valuable tool to assess and monitor changes in the strength of the subchondral bone plate in vivo.

Computer tomographic evaluation of talar edge configuration for osteochondral graft transplantation

To successfully surgically reconstruct osteochondral lesions of the talus, the exact three‐dimensional (3D) configuration of the upper articular surface of the talus has to be respected. We assessed the talar geometry by measuring the coronal and sagittal talar edge radius and the frontal talar profile in multiplanar reconstructions of computer tomographic (CT) studies of 79 patients (83 feet) with a healthy ankle joint. An image visualization software designated for coordinate measurement was used to perform the measurement. In the coronal plane, the mean lateral talar edge radius was 4.0 mm and the medial 4.5 mm. In the sagittal planes the mean lateral talar edge radius was 20.3 mm, the radius of the sulcus 20.7 mm and the medial talar edge radius 20.4 mm. The talus showed a concave shape in coronal cuts. These results show a significant difference between medial and lateral talar edge configuration in coronal planes. The measurements of the lateral and medial sagittal radius and the mid‐sagittal radius in the sulcus tali show no statistically significant difference. The depth of the talar sulcus shows no correlation to age or sex. Different sizes of custom‐made tissue‐engineered grafts according to the location of the osteochondral lesion at the talus are needed for exact surgical reconstruction of the anatomy. Osteochondral lesions are three dimensional; therefore, a 3D preoperative planning tool by CT scan or MRI is mandatory. Clin. Anat. 25:773–780, 2012.

Computed Tomographic Evaluation of Joint Geometry in Patients With End-Stage Ankle Osteoarthritis

Background: Deformation of the talus and the distal tibia can be frequently observed during ankle joint osteoarthritis (OA). The aim of this study was to objectify these morphologic changes. We hypothesized that a flattening of the talus and a broadening of the distal tibia surface occurs in end-stage OA of the ankle joint. Methods: Twenty-seven computed tomography (CT) ankle joint examinations of unilateral ankle OA were matched by sex and age with 27 CT examinations of healthy ankle joints. Three-dimensional reformatting and measurements were performed with geometry analysis software. The following parameters were assessed: sagittal radius of the talus, talus height, and mediolateral and anteroposterior width of the distal tibial joint surface. Results: Medial, midsagittal, and lateral sagittal arc radii of osteoarthritic tali were significantly larger compared to tali of controls. There was a statistically significant difference in the height of the osteoarthritic talar dome in the medial and in the lateral frontal segment and in the medial central segment compared to tali of controls. The anteroposterior width and the sagittal curvature of the distal tibia was significantly larger in OA ankles than in the control group. The mediolateral measurements were comparable across both groups. Conclusion: Flattening of the talus appears to be more pronounced in the frontal aspect of the talus. The distal tibia broadens anteroposteriorly. These findings may contribute to better understanding of ankle OA development. Level of Evidence: Level III, retrospective comparative cohort study.

Insight into the 3D-trabecular architecture of the human patella.

The subchondral bone plate (SBP), a dynamic component of the osteochondral unit, shows functional adaptation to long-term loading by distribution of the mineral content in a manner best serving the mechanical demands. Since the received joint-load is transmitted into the trabecular system, the spongy bone also exhibits differences in strain energy density which models it for optimal support. To evaluate the regional variations in trabecular architecture, in accordance with the density distribution of the SBP revealing its long-term load intake, CT- and μCT-datasets of ten physiologic patellae were analysed for defined parameters of bony structure. For the SBP, the density distributions as well as area measurements were used. The trabecular architecture was described using parameters of bone morphology comprising the first 5mm (examined in 1mm steps) below the SBP. The obtained measurements are: Bone volume fraction (BV/TV); Bone surface density (BS/TV); Trabecular number (Tb.N); Trabecular separation (Tb.Sp); Trabecular thickness (Tb.Th); structure model index (SMI); and the Degree of anisotropy (DA). The evaluated architectural parameters varied within the trabecular system and showed an inhomogeneous distribution pattern. It proved to be distinctive with maxima of material and stability situated below areas of the highest long-term load intake. With increasing depth, the pattern of distribution was persistent but lessened in intensity. The parameters significantly correlated with the density distribution of the SBP within the first and second millimetres. With increasing depth down to the fifth millimetre, the coefficients of correlation decreased for all values. The trabecular network adapts to its mechanical needs and is therefore not homogenously built. Dependent upon the long-term load intake, the trabecular model optimizes the support with significant correlation to the density distribution of the SBP.

The subtalar and talonavicular joints: a way to access the long-term load intake using conventional CT-data.

AbstractPurpose The aim of this study was to investigate the distribution of density of the subchondral bone plate within the articular surfaces of the subtalar and talonavicular joint regarding to its mineralisation and to verify whether a correlation to the mechanical bone strength exists.MethodsA total of 21 cadaverous lower leg specimens were investigated. Computed tomography osteo-absorptiometry (CT-OAM) was used to display the mineralisation of the subchondral bone plate analysing its density. The mechanical strength was measured by means of indentation testing. The distribution pattern was analysed regarding their dissemination with the main focus on number and location of their maxima. The correlation of both parameters was evaluated by linear regression.ResultsThe mineralisation and the mechanical strength were not distributed homogenously throughout the articular surfaces but showed unique and reproducible patterns. The range of absolute values for density and strength varied in between the samples and joint surfaces, but the number and location of the maxima evaluated by both methods showed to be concurring. The coefficient of correlation of both datasets ranged from 0.76 to 0.95 (median 0.88) and showed a linear dependency.ConclusionsDensity distribution and mechanical strength of the subchondral bone plate are significantly associated and can be seen as a mirror of the long-term load intake of a joint. It can be concluded that CT-OAM as a tool to visualize subchondral bone plate density distribution regarding to its mineralisation can be used to indirectly gain information about joint biomechanics in vivo by the use of conventional CT-data.

Mineral density and penetration strength of the subchondral bone plate of the talar dome : high correlation and specific distribution patterns

The subchondral bone plate plays an important role in stabilizing the osteochondral joint unit and in the pathomechanism of osteochondral lesions and osteoarthritis. The objective of the present study was to measure the mineral density distribution and subchondral bone plate penetration strength of the talar dome joint facet to display and compare the specific distribution patterns. Ten cadaver specimens were used for computed tomography (CT) scans, from which densitograms were derived using CT-osteoabsorptiometry, and for mechanical indentation testing from which the penetration strength was obtained. Our results showed 2 different distribution patterns for mineral density and penetration strength. Of the 10 specimens, 6 (60%) showed bicentric maxima (anteromedially and anterolaterally), and 4 (40%) showed a monocentric maximum (either anteromedially or anterolaterally). A highly significant correlation (p < .0001) for both methods confirmed that the mineral density relied on local load characteristics. In conclusion, the biomechanical properties of the subchondral bone plate of the talar dome joint facet showed specific distribution patterns. CT-osteoabsorptiometry is a reliable method to display the mineral density distribution noninvasively. We recommend CT-osteoabsorptiometry for noninvasive analysis of the biomechanical properties of the subchondral bone plate in osteochondral joint reconstruction and the prevention and treatment of osteoarthritis and osteochondral lesions.

Transcutaneous pleural biopsy with a retrograde forceps: a novel approach

PurposePleural biopsies are commonly performed to investigate the cause of exudative pleural effusion. Biopsy needles (e.g. Abrams needle, Cope needle) are traditionally used to perform the biopsy. However, certain complications such as pneumothorax and haemothorax have been described. We present a technique utilizing a novel retrograde forceps, which could improve the simplicity and lower the complication rate of performing closed pleural biopsies.DescriptionA retrograde forceps (Retroforceps, Karl Storz, Tuttlingen, Germany) was used to perform 20 transcutaneous pleural biopsies in a cadaver thorax under thoracoscopical control. Video documentation of the procedure from outside and inside the thorax was performed. The surgeon performing the biopsy was blinded to the thoracoscopical view. After the removal of the forceps, it was checked whether biopsy material was retrieved. The video material was retrospectively used to confirm whether the biopsy was taken from the pleura parietalis.EvaluationBiopsy material was retrieved in 19 out of 20 biopsy attempts. Video material confirmed that the biopsy was taken from the pleura parietalis in all cases.ConclusionsUsing a retrograde biopsy forceps is a simple and practicable procedure suitable for clinical application. This technique could potentially reduce the incidence of pneumothorax.

Functional and Structural Details about the Fabella: What the Important Stabilizer Looks Like in the Central European Population.

The posterolateral corner of the knee accommodating the fabella complex is of importance in orthopaedic surgery. Unfortunately, there is a lack of data in literature for clinical routine. Therefore, we investigated the fabellas characteristics, biomechanical nature, and present histologic details. Of special interest were the fabellas occurrence and position, calcium concentration as long-term load intake indicator, and the histology. Within our analysis, fabellae were found in 30.0% of all datasets, located on the upper part of the posterolateral femoral condyle. The region of fabella contact on this condyle showed a significantly lower calcium concentration than its surroundings. Histologically, the fabella showed no articular cartilage but a clearly distinguishable fabellofibular ligament that consisted of two bundles: one, as already described in literature inserted at the fibular tip, and another part newly described on the top of the lateral meniscus. In its role of stabilizing the soft tissue structures of the posterolateral knee, the fabella seems to serve as suspension for the ligaments evolving from its base. Even though a joint formation of any kind is unlikely, the presence of a fabella needs to be kept in mind during knee examination and any surgical procedures.

The human hip joint and its long-term load intake – how x-ray density distribution mirrors bone strength

The aim of this study was to gain information about the topographical distribution of the mechanical strength of the subchondral bone plate of the hip joint and evaluate the correlation to its density distribution. Our intention was to describe a method of visualising and monitoring the long-term load intake of the hip using conventional CT-data in a way which might be applied in clinical practice. We examined the lunate surface of the acetabulum (facies lunata) and femoral head in 25 cases, looking at the density of the subchondral bone plate by computed tomography osteoabsorptiometry (CT-OAM) and determined its mechanical strength by indentation testing using an osteo-penetrometer. The resulting distribution patterns were matched and statistically analysed, showing an inhomogeneous but regular and reproducible distribution of mineralisation and mechanical strength throughout the joint surface. Maximal density was found anterosuperiorly and near the rim of the facies lunata and in the superior area of the femoral head. For each specimen a correlation of density and strength (r2 = 0.77 – 0.97) was found (p<0.01). The density distribution pattern shown by CT-OAM allows conclusions to be drawn about the distribution of strength and therefore the long term load intake within the subchondral bone plate of the hip. Using conventional CT-data, the method can be used in the clinical setting for evaluation and monitoring.