Sergei S. Sheiko

Adsorption-induced scission of carbon–carbon bonds

Covalent carbon–carbon bonds are hard to break. Their strength is evident in the hardness of diamonds and tensile strength of polymeric fibres; on the single-molecule level, it manifests itself in the need for forces of several nanonewtons to extend and mechanically rupture one bond. Such forces have been generated using extensional flow, ultrasonic irradiation, receding meniscus and by directly stretching a single molecule with nanoprobes. Here we show that simple adsorption of brush-like macromolecules with long side chains on a substrate can induce not only conformational deformations, but also spontaneous rupture of covalent bonds in the macromolecular backbone. We attribute this behaviour to the fact that the attractive interaction between the side chains and the substrate is maximized by the spreading of the side chains, which in turn induces tension along the polymer backbone. Provided the side-chain densities and substrate interaction are sufficiently high, the tension generated will be strong enough to rupture covalent carbon–carbon bonds. We expect similar adsorption-induced backbone scission to occur for all macromolecules with highly branched architectures, such as brushes and dendrimers. This behaviour needs to be considered when designing surface-targeted macromolecules of this type—either to avoid undesired degradation, or to ensure rupture at predetermined macromolecular sites.

Orthogonal self-assembly in folding block copolymers

We herein report the synthesis and characterization of ABA triblock copolymers that contain two complementary association motifs and fold into single-chain polymeric nanoparticles (SCPNs) via orthogonal self-assembly. The copolymers were prepared using atom-transfer radical polymerization (ATRP) and possess different pendant functional groups in the A and B blocks (alcohols in the A block and acetylenes in the B block). After postfunctionalization, the A block contains o-nitrobenzyl-protected 2-ureidopyrimidinone (UPy) moieties and the B block benzene-1,3,5-tricarboxamide (BTA) moieties. While the protected UPy groups dimerize after photoinduced deprotection of the o-nitrobenzyl group, the BTA moieties self-assemble into helical aggregates when temperature is reduced. In a two-step thermal/photoirradiation treatment under dilute conditions, the ABA block copolymer forms both BTA-based helical aggregates and UPy dimers intramolecularly. The sequential association of the two self-assembling motifs results in single-chain folding of the polymer, affording nanometer-sized particles with a compartmentalized interior. Variable-temperature NMR studies showed that the BTA and UPy self-assembly steps take place orthogonally (i.e., without mutual interference) in dilute solution. In addition, monitoring of the intramolecular self-assembly of BTA moieties into helical aggregates by circular dichroism spectroscopy showed that the stability of the aggregates is almost independent of UPy dimerization. Size-exclusion chromatography (SEC) and small-angle X-ray scattering analysis provided evidence of significant reductions in the hydrodynamic volume and radius of gyration, respectively, after photoinduced deprotection of the UPy groups; a 30-60% reduction in the size of the polymer chains was observed using SEC in CHCl(3). Molecular imaging by atomic force microscopy (AFM) corroborated significant contraction of individual polymer chains due to intramolecular association of the BTA and UPy groups. The stepwise folding process resulting from orthogonal self-assembly-induced supramolecular interactions yields compartmentalized SCPNs comprised of distinct microdomains that mimick two secondary-structuring elements in proteins.

Forces affecting the substrate in resonant tapping force microscopy

We propose a simple model to describe the interaction of a forced cantilever oscillation with a specimen in a tapping-mode scanning force microscope experiment in order to make a rough estimation of the forces affecting the surface with each touch down of the tip. Assuming weak damping of the cantilever (quality factor of the cantilever between 100 and 1000) and of the surface, we can estimate the forces to be in the range of those in the contact mode. These forces can vary by orders of magnitude, e.g. 10-6 to 10-11 N. To reduce the interaction force we suggest scanning on the low-frequency side of the resonance frequency of the non-contact cantilever oscillation. Increasing the difference of phase between the non-contact oscillation of the cantilever in air and the oscillation during contact introduces strong variations of the force. The improvement in resolution which can be achieved for soft samples by using the tapping-mode system results from the elimination of shear forces and the possibility of minimizing the force on the surface by varying the set-point of the scanning amplitude. Forces on the substrate will be enhanced by a large substrate stiffness.

Imaging of Polymers Using Scanning Force Microscopy: From Superstructures to Individual Molecules

This review article describes progress made in scanning force microscopy of polymers during the last 5 years including fundamental principles of SFM and recent developments in instrumentation relevant to polymer systems. It focuses on the analytical capabilities of SFM techniques in areas of research where they give the most unique and valuable information not accessible by other methods. These include (i) quantitative characterisation of material properties and structure manipulation on the nanometer scale, and (ii) visualisation and probing of single macromolecules.

Solvent-free, supersoft and superelastic bottlebrush melts and networks.

Polymer gels are the only viable class of synthetic materials with a Youngs modulus below 100 kPa conforming to biological applications, yet those gel properties require a solvent fraction. The presence of a solvent can lead to phase separation, evaporation and leakage on deformation, diminishing gel elasticity and eliciting inflammatory responses in any surrounding tissues. Here, we report solvent-free, supersoft and superelastic polymer melts and networks prepared from bottlebrush macromolecules. The brush-like architecture expands the diameter of the polymer chains, diluting their entanglements without markedly increasing stiffness. This adjustable interplay between chain diameter and stiffness makes it possible to tailor the networks elastic modulus and extensibility without the complications associated with a swollen gel. The bottlebrush melts and elastomers exhibit an unprecedented combination of low modulus (∼100 Pa), high strain at break (∼1,000%), and extraordinary elasticity, properties that are on par with those of designer gels.

Molecular imaging of monodendron jacketed linear polymers by scanning force microscopy

Polystyrene and polymethacrylate with 3,4,5-tris[4-(tetradecyloxy)benzyloxy]benzoic acid and 3,4,5-tris[3,4,5-tris(dodecyloxy)benzyloxy]benzyl alcohol side groups, respectively, were visualized by scanning force microscopy (SFM). The cylindrical molecules did not interpenetrate and their chain ends could be resolved in the images allowing quantitative evaluation of their length distribution. Whereas the polymethacrylate with the sterically most demanding side groups demonstrated a fairly good agreement between the SFM length and the calculated contour length, the polystyrene with the less branched substituent appeared to be at least two times shorter. The reduced length of the polymer chains was attributed to a disordered helixlike conformation.

How far can we push polymer architectures

We here report the synthesis and characterization of a complex polymeric architecture based on a block copolymer with a cylindrical brush block and a single-chain polymeric nanoparticle block folded due to strong intramolecular hydrogen-bonds. The self-assembly of these constructs on mica surfaces was studied with atomic force microscopy, corroborating the distinct presence of block copolymer architectures.

Tuning Multiphase Amphiphilic Rods to Direct Self-Assembly

New methods to direct the self-assembly of particles are highly sought after for multiple applications, including photonics, electronics, and drug delivery. Most techniques, however, are limited to chemical patterning on spherical particles, limiting the range of possible structures. We developed a lithographic technique for fabrication of chemically anisotropic rod-like particles in which we can specify both the size and shape of particles and implement multiple diverse materials to control interfacial interactions. Multiphase rod-like particles, including amphiphilic diblock, triblock, and multiblock were fabricated in the same template mold having a tunable hydrophilic/hydrophobic ratio. Self-assembly of diblock or triblock rods at a water/oil interface led to the formation of bilayer or ribbon-like structures.

Low modulus biomimetic microgel particles with high loading of hemoglobin.

We synthesized extremely deformable red blood cell-like microgel particles and loaded them with bovine hemoglobin (Hb) to potentiate oxygen transport. With similar shape and size as red blood cells (RBCs), the particles were fabricated using the PRINT (particle replication in nonwetting templates) technique. Low cross-linking of the hydrogel resulted in very low mesh density for these particles, allowing passive diffusion of hemoglobin throughout the particles. Hb was secured in the particles through covalent conjugation of the lysine groups of Hb to carboxyl groups in the particles via EDC/NHS coupling. Confocal microscopy of particles bound to fluorescent dye-labeled Hb confirmed the uniform distribution of Hb throughout the particle interior, as opposed to the surface conjugation only. High loading ratios, up to 5 times the amount of Hb to polymer by weight, were obtained without a significant effect on particle stability and shape, though particle diameter decreased slightly with Hb conjugation. Analysis of the protein by circular dichroism (CD) spectroscopy showed that the secondary structure of Hb was unperturbed by conjugation to the particles. Methemoglobin in the particles could be maintained at a low level and the loaded Hb could still bind oxygen, as studied by UV-vis spectroscopy. Hb-loaded particles with moderate loading ratios demonstrated excellent deformability in microfluidic devices, easily deforming to pass through restricted pores half as wide as the diameter of the particles. The suspension of concentrated particles with a Hb concentration of 5.2 g/dL showed comparable viscosity to that of mouse blood, and the particles remained intact even after being sheared at a constant high rate (1000 1/s) for 10 min. Armed with the ability to control size, shape, deformability, and loading of Hb into RBC mimics, we will discuss the implications for artificial blood.

Fatal adsorption of brushlike macromolecules: high sensitivity of C-C bond cleavage rates to substrate surface energy.

Adsorption-induced degradation of brushlike macromolecules was monitored through molecular imaging by atomic force microscopy. The rate constant for C-C bond cleavage was shown to be extremely sensitive to the substrate surface energy. A few percent increase in the surface energy from 69.2 to 71.2 mN/m led to an order of magnitude increase of the scission rate. The absolute values of the rupture forces ranging from 2.57 to 2.47 nN are in agreement with previously calculated and measured values for stretching surface-tethered molecules.