Sergey Lazarev

Structural Evolution of Colloidal Crystal Films in the Process of Melting Revealed by Bragg Peak Analysis

In situ X-ray diffraction studies of structural evolution of colloidal crystal films formed by polystyrene spherical particles upon incremental heating are reported. The Bragg peak parameters, such as peak position, integrated intensity, and radial and azimuthal widths were analyzed as a function of temperature. A quantitative study of colloidal crystal lattice distortions and mosaic spread as a function of temperature was carried out using Williamson-Hall plots based on mosaic block model. The temperature dependence of the diameter of polystyrene particles was obtained from the analysis of Bragg peaks, and the form factor contribution extracted from the diffraction patterns. Four stages of structural evolution in a colloidal crystal upon heating were identified. Based on this analysis, a model of the heating and melting process in the colloidal crystal film is suggested.

Study of threading dislocation density reduction in AlGaN epilayers by Monte Carlo simulation of high- resolution reciprocal-space maps of a two-layer system

High-resolution X-ray diffraction in coplanar and noncoplanar geometries has been used to investigate the influence of an SiNx nano-mask in the reduction of the threading dislocation (TD) density of high-quality AlGaN epitaxial layers grown on sapphire substrates. Our developed model, based on a Monte Carlo method, was applied to the simulation of the reciprocal-space maps of a two-layer system. Good agreement was found between the simulation and the experimental data, leading to an accurate determination of the dislocation densities as a function of the overgrowth layer thickness. The efficiency of the SiNx nano-mask was defined as the ratio of the TD densities in the AlGaN layers below and above the mask. A significant improvement in the AlGaN layer quality was achieved by increasing the overgrowth layer thickness, and a TD density reduction scaling law was established.

Statistical properties of a free-electron laser revealed by Hanbury Brown–Twiss interferometry

We present a comprehensive experimental analysis of statistical properties of the self-amplified spontaneous emission (SASE) free-electron laser (FEL) FLASH at DESY in Hamburg by means of Hanbury Brown and Twiss (HBT) interferometry. The experiments were performed at the FEL wavelengths of 5.5 nm, 13.4 nm, and 20.8 nm. We determined the 2-nd order intensity correlation function for all wavelengths and different operation conditions of FLASH. In all experiments a high degree of spatial coherence (above 50%) was obtained. Our analysis performed in spatial and spectral domains provided us with the independent measurements of an average pulse duration of the FEL that were below 60 fs. To explain complicated behaviour of the 2-nd order intensity correlation function we developed advanced theoretical model that includes the presence of multiple beams and external positional jitter of the FEL pulses. By this analysis we determined that in most experiments several beams were present in radiating field and in one of the experiments external positional jitter was about 25% of the beam size. We envision that methods developed in our study will be used widely for analysis and diagnostics of the FEL radiation.

Polytypism in GaAs nanowires: determination of the interplanar spacing of wurtzite GaAs by X-ray diffraction

In GaAs nanowires grown along the cubic [111]c direction, zinc blende and wurtzite arrangements have been observed in their stacking sequence, since the energetic barriers for nucleation are typically of similar order of magnitude. It is known that the interplanar spacing of the (111)c Ga (or As) planes in the zinc blende polytype varies slightly from the wurtzite polytype. However, different values have been reported in the literature. Here, the ratio of the interplanar spacing of these polytypes is extracted based on X-ray diffraction measurements for thin GaAs nanowires with a mean diameter of 18-25 nm. The measurements are performed with a nano-focused beam which facilitates the separation of the scattering of nanowires and of parasitic growth. The interplanar spacing of the (111)c Ga (or As) planes in the wurtzite arrangement in GaAs nanowires is observed to be 0.66% ± 0.02% larger than in the zinc blende arrangement.

The power of in situ pulsed laser deposition synchrotron characterization for the detection of domain formation during growth of Ba0.5Sr0.5TiO3 on MgO

A highly sophisticated pulsed laser deposition (PLD) chamber has recently been installed at the NANO beamline at the synchrotron facility ANKA (Karlsruhe, Germany), which allows for comprehensive studies on the PLD growth process of dielectric, ferroelectric and ferromagnetic thin films in epitaxial oxide heterostructures or even multilayer systems by combining in situ reflective high-energy diffraction with the in situ synchrotron high-resolution X-ray diffraction and surface diffraction methods. The modularity of the in situ PLD chamber offers the opportunity to explore the microstructure of the grown thin films as a function of the substrate temperature, gas pressure, laser fluence and target-substrate separation distance. Ba0.5Sr0.5TiO3 grown on MgO represents the first system that is grown in this in situ PLD chamber and studied by in situ X-ray reflectivity, in situ two-dimensional reciprocal space mapping of symmetric X-ray diffraction and acquisition of time-resolved diffraction profiles during the ablation process. In situ PLD synchrotron investigation has revealed the occurrence of structural distortion as well as domain formation and misfit dislocation which all depend strongly on the film thickness. The microstructure transformation has been accurately detected with a time resolution of 1 s. The acquisition of two-dimensional reciprocal space maps during the PLD growth has the advantage of simultaneously monitoring the changes of the crystalline structure as well as the formation of defects. The stability of the morphology during the PLD growth is demonstrated to be remarkably affected by the film thickness. A critical thickness for the domain formation in Ba0.5Sr0.5TiO3 grown on MgO could be determined from the acquisition of time-resolved diffraction profiles during the PLD growth. A splitting of the diffraction peak into two distinguishable peaks has revealed a morphology change due to modification of the internal strain during growth.

Three-dimensional reciprocal space mapping of diffuse scattering for the study of stacking faults in semipolar (\bf 11{\overline 2}2) GaN layers grown from the sidewall of an r-patterned sapphire substrate

Three-dimensional reciprocal space mapping of semipolar (11{\overline 2}2) GaN grown on stripe-patterned r-plane (1{\overline 1}02) sapphire substrates is found to be a powerful and crucial method for the analysis of diffuse scattering originating from stacking faults that are diffracting in a noncoplanar geometry. Additionally, by measuring three-dimensional reciprocal space maps (3D-RSMs) of several reflections, the transmission electron microscopy visibility criteria could be confirmed. Furthermore, similar to cathodoluminescence, the 3D-RSM method could be used in future as a reliable tool to distinguish clearly between the diffuse scattering signals coming from prismatic and from basal plane stacking faults and from partial dislocations in semipolar (11{\overline 2}2) GaN. The fitting of the diffuse scattering intensity profile along the stacking fault streaks with a simulation based on the Monte Carlo approach has delivered an accurate determination of the basal plane stacking fault density. A reduction of the stacking fault density due to the intercalation of an SiN interlayer in the GaN layer deposited on the sidewall of the pre-patterned sapphire substrate has led to an improvement of the optoelectronic properties, influenced by the crystal quality, as has been demonstrated by a locally resolved cathodoluminescence investigation.

Bragg coherent x-ray diffractive imaging of a single indium phosphide nanowire

Three-dimensional (3D) Bragg coherent x-ray diffractive imaging (CXDI) with a nanofocused beam was applied to quantitatively map the internal strain field of a single indium phosphide nanowire. The quantitative values of the strain were obtained by pre-characterization of the beam profile with transmission ptychography on a test sample. Our measurements revealed the 3D strain distribution in a region of 150 nm below the catalyst Au particle. We observed a slight gradient of the strain in the range of 0.6% along the [111] growth direction of the nanowire. We also determined the spatial resolution in our measurements to be about 10 nm in the direction perpendicular to the facets of the nanowire. The CXDI measurements were compared with the finite element method simulations and show a good agreement with our experimental results. The proposed approach can become an effective tool for in operando studies of the nanowires. (Less)

Quantum imaging with incoherently scattered light from a free-electron laser

The intensity correlations in incoherently scattered X-rays from a free-electron laser can be exploited to image 2D objects with a resolution close to or below the diffraction limit.

X-ray Bragg Ptychography on a Single InGaN/GaN Core–Shell Nanowire

The future of solid-state lighting can be potentially driven by applications of InGaN/GaN core-shell nanowires. These heterostructures provide the possibility for fine-tuning of functional properties by controlling a strain state between mismatched layers. We present a nondestructive study of a single 400 nm-thick InGaN/GaN core-shell nanowire using two-dimensional (2D) X-ray Bragg ptychography (XBP) with a nanofocused X-ray beam. The XBP reconstruction enabled the determination of a detailed three-dimensional (3D) distribution of the strain in the particular nanowire using a model based on finite element method. We observed the strain induced by the lattice mismatch between the GaN core and InGaN shell to be in the range from -0.1% to 0.15% for an In concentration of 30%. The maximum value of the strain component normal to the facets was concentrated at the transition region between the main part of the nanowire and the GaN tip. In addition, a variation in misfit strain relaxation between the axial growth and in-plane directions was revealed.

Asymmetric skew X-ray diffraction at fixed incidence angle: application to semiconductor nano-objects

A procedure for obtaining three-dimensionally resolved reciprocal-space maps in a skew X-ray diffraction geometry is described. The geometry allows tuning of the information depth in the range from tens of micrometres for symmetric skew diffraction down to tens of nanometres for strongly asymmetric skew geometries, where the angle of incidence is below the critical angle of total external reflection. The diffraction data are processed using a rotation matrix formalism. The whole three-dimensional reciprocal-space map can be measured by performing a single azimuthal rotation of the sample and using a two-dimensional detector, while keeping the angle of incidence and the X-ray information depth fixed (FIXD method). Having a high surface sensitivity under grazing-incidence conditions, the FIXD method can be applied to a large variety of Bragg reflections, particularly polar ones, which provide information on strain and chemical composition separately. In contrast with conventional grazing-incidence diffraction, the FIXD approach reveals, in addition to the lateral (in-plane) components, the vertical (out-of-plane) component of the strain field, and therefore allows the separation of the scattering contributions of strained epitaxial nanostructures by their vertical misfit. The potential of FIXD is demonstrated by resolving the diffraction signal from a single layer of InGaN quantum dots grown on a GaN buffer layer. The FIXD approach is suited to the study of free-standing and covered near-surface nano-objects, as well as vertically extended multilayer structures.