Sergio Paduano

Evaluation of surface roughness of orthodontic wires by means of atomic force microscopy

OBJECTIVE To compare the surface roughness of different orthodontic archwires. MATERIALS AND METHODS Four nickel-titanium wires (Sentalloy(®), Sentalloy(®) High Aesthetic, Titanium Memory ThermaTi Lite(®), and Titanium Memory Esthetic(®)), three β-titanium wires (TMA(®), Colored TMA(®), and Beta Titanium(®)), and one stainless-steel wire (Stainless Steel(®)) were considered for this study. Three samples for each wire were analyzed by atomic force microscopy (AFM). Three-dimensional images were processed using Gwiddion software, and the roughness average (Ra), the root mean square (Rms), and the maximum height (Mh) values of the scanned surface profile were recorded. Statistical analysis was performed by one-way analysis of variance (ANOVA) followed by Tukeys post hoc test (P < .05). RESULTS The Ra, Rms, and Mh values were expressed as the mean ± standard deviation. Among as-received archwires, the Stainless Steel (Ra  =  36.6 ± 5.8; Rms  =  48 ± 7.7; Mh  =  328.1 ± 64) archwire was less rough than the others (ANOVA, P < .05). The Sentalloy High Aesthetic was the roughest (Ra  =  133.5 ± 10.8; Rms  =  165.8 ± 9.8; Mh  =  949.6 ± 192.1) of the archwires. CONCLUSIONS The surface quality of the wires investigated differed significantly. Ion implantation effectively reduced the roughness of TMA. Moreover, Teflon(®)-coated Titanium Memory Esthetic was less rough than was ion-implanted Sentalloy High Aesthetic.

Effect of Nickel Chloride on Cell Proliferation

Objective: Metal alloys used in dentistry and in other biomedical fields may release nickel ions in the oral environment. The release of nickel might influence the normal biological and physiological processes, including tissue wound healing, cell growth and proliferation. The aim of this study was to evaluate in vitro the effects of nickel ions on cell cycle, viability and proliferation. Materials and Methods: Human osteosarcoma cells (U2OS) and human keratinocytes (HaCat) were exposed to different nickel chloride (NiCl2) concentrations (0 - 5mM) for various periods exposure. The viability of cultured cells was estimated by flow cytometry using Annexin V-FITC and Propidium Iodide (PI). Cell proliferation was evaluated by using carboxyfluorescein diacetate succinimidyl ester (CFDA-SE) and flow cytometry. Finally, the effects of NiCl2 on cell cycle were assessed and quantified by flow cytometry. Statistical analysis was performed by means of ANOVA followed by Tukey’s test. Results: NiCl2 induced a dose and time dependent decrease in cell viability. After 24h, 1mM NiCl2 caused a similar and significant reduction of viability in U2OS and HaCat cells, while higher NiCl2 concentrations and longer exposure times showed a reduced cytotoxic effect in HaCat as compared to U2OS cells. Exposure to NiCl2 caused a dose- and time-dependent inhibition of cell proliferation in both cell lines tested, with a prominent effect on U2OS cells. Furthermore, both cell lines exposed to NiCl2 exhibited significant changes in cell cycle distribution after 24h exposure 2mM NiCl2, as compared to untreated cells (p<0.05). Conclusion: Our results indicate that release of nickel ions may affect cell proliferation. The inhibition of cell growth by NiCl2 is mediated by both cell cycle arrest and by induction of cell death.

Association between posterior crossbite, masticatory muscle pain, and disc displacement: a systematic review

BACKGROUND Among different malocclusions, posterior crossbite is thought to have a strong impact on the correct functioning of the masticatory system. OBJECTIVE To assess, by systematically reviewing the literature, the association between posterior crossbite and different temporomandibular disorder (TMD) diagnosis: disc displacement and masticatory muscle pain. MATERIALS AND METHODS A literature survey covering the period from January 1965 to April 2012 was performed. Two reviewers extracted the data independently and assessed the quality of the studies. RESULTS The search strategy resulted in 2919 citations, of which 43 met the inclusion criteria. The scientific and methodological quality of these studies was found to be medium-low, independently by association reported. In several studies, posterior crossbite is reported to be associated to the development of disc displacement, muscular pain, and tenderness, possibly linked to a skeletal and muscular adaptation of the stomatognathic system. However, the lack of consistency of the results reported deeply reduces the external validity of the studies, with a consequent impossibility to draw definite conclusions. CONCLUSIONS It is not possible to establish an association between posterior crossbite, muscle pain, and disc displacement because the distribution of the studies supporting or not supporting the association is similar. The consequences of posterior crossbite on the development of TMDs deserve further investigations, with high sample size, well-defined diagnostic criteria, and rigorous scientific methodologies. Finally, long-term controlled studies are needed to identify posterior crossbite as a possible risk factor for TMDs.

Effects of intraoral aging on surface properties of coated nickel-titanium archwires

OBJECTIVE To evaluate the effects of intraoral aging on surface properties of esthetic and conventional nickel-titanium (NiTi) archwires. MATERIALS AND METHODS Five NiTi wires were considered for this study (Sentalloy, Sentalloy High Aesthetic, Superelastic Titanium Memory Wire, Esthetic Superelastic Titanium Memory Wire, and EverWhite). For each type of wire, four samples were analyzed as received and after 1 month of clinical use by an atomic force microscope (AFM) and a scanning electronic microscope (SEM). To evaluate sliding resistance, two stainless steel plates with three metallic or three monocrystalline brackets, bonded in passive configuration, were manufactured; four as-received and retrieved samples for every wire were pulled five times at 5 mm/min for 1 minute by means of an Instron 5566, recording the greatest friction value (N). Data were analyzed by one-way analysis of variance and by Students t-test. RESULTS After clinical use, surface roughness increased considerably. The SEM images showed homogeneity for the as-received control wires; however, after clinical use esthetic wires exhibited a heterogeneous surface with craters and bumps. The lowest levels of friction were observed with the as-received Superelastic Titanium Memory Wire on metallic brackets. When tested on ceramic brackets, all the wires exhibited an increase in friction (t-test; P < .05). Furthermore, all the wires, except Sentalloy, showed a statistically significant increase in friction between the as-received and retrieved groups (t-test; P < .05). CONCLUSION Clinical use of the orthodontic wires increases their surface roughness and the level of friction.

Social impairment of individuals suffering from different types of chronic orofacial pain

BackgroundThe daily life of patients suffering from orofacial pain is considerably impaired as compared to healthy subjects. The aim of this study was to investigate the influence of different categories of orofacial pain on the habitual life of adult individuals.MethodsSeven hundred eighty-one individuals with orofacial pain were recruited from an initial sample of 1,058 patients. All the individuals were allocated to groups according to their diagnosis: myofascial pain (group A, 676 subjects, 525 females and 151 males; mean age ± SD = 35.2 ± 12.6), migraine (group B, 39 subjects, 29 females and 10 males; mean age ± SD 36.0 ± 10.7), and both myofascial pain and migraine (group C, 66 subjects, 56 females and 10 males, mean age ± SD = 35.6 ± 10.8). Characteristic pain intensity (CPI), disability days (DD), disability score (DS), and graded chronic pain intensity (GCPS) were calculated according to Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) axis II. Depression and somatization (nonspecific physical symptoms) scores were also calculated.ResultsA significant association between groups and GCPS categories was found (p < 0.0001). Post hoc tests showed a significant difference between groups A and B and between A and C, but not between B and C. In group A, the most frequent GCPS score was grade II. The most frequent GCPS score in groups B and C was grade III, indicating a moderate limiting impairment. This score was more frequent in group B (41%) than in the other groups (group A = 20.6%, group C = 34.8%). GCPS grade IV was more frequent in group C (19.7%) than in the other groups. Group C had significantly higher scores for nonspecific physical symptoms than group A (p < 0.05).ConclusionsMyofascial pain and migraine sensibly affect the common daily life of adult individuals. The comorbidity of both conditions determines a major impairment.

Effect of pH on in vitro biocompatibility of orthodontic miniscrew implants

BackgroundAlthough the clinical use of miniscrews has been investigated on a large scale, little is known about their biocompatibility. Since low pH can affect corrosion resistance, the aim of this study was to evaluate the cytotoxic effect of orthodontic miniscrews in different pH conditions.MethodsFour orthodontic miniscrews of stainless steel and grade IV and grade V titanium were immersed in a pH 7 and pH 4 saline solution for 1, 7, 14, 21, 28, and 84 days. Human osteogenic sarcoma cells (U2OS), permanent human keratinocytes (HaCat), and primary human gingival fibroblasts (HGF) were exposed to eluates, and the mitochondrial dehydrogenase activity was measured after 24 h to assess the cytoxicity. The results were analyzed using the Mann-Whitney U test (P < 0.05).ResultsWhen exposed to pH 7-conditioned eluates, the cell lines showed an even greater viability than untreated cells. On the contrary, the results revealed a statistically significant decrease in U2OS, HaCat, and HGF viability after exposure to eluates obtained at pH 4. Among the cell lines tested, HGF showed the most significant decrease of mitochondrial activity. Interestingly, grade V titanium miniscrews caused highest toxic effects when immersed at pH 4.ConclusionsThe results suggested that at pH 7, all the miniscrews are biocompatible while the eluates obtained at pH 4 showed significant cytotoxicity response. Moreover, different cell lines can produce different responses to miniscrew eluates.

Treatment of a Class II Division 2 Patient with Severe Skeletal Discrepancy by Using a Custom Made TPA Proclination Spring

This case report describes the orthodontic treatment of a boy, aged 15.3 years, with permanent dentition, mesofacial typology, affected with a severe sagittal skeletal Class II division 2 malocclusion, due to a mandibular retrusion. His chief compliant was the position of the maxillary incisors, displaced too palatally, and an impaired facial profile. Herbst and multi-bracket straightwire fixed appliances, together with a custom made modified transpalatal arch (i.e. TPA proclination spring), were used to correct the sagittal discrepancy and to improve the attractiveness of the impaired facial profile.

Temperature Profiles Along the Root with Gutta-percha Warmed through Different Heat Sources

Objectives: To evaluate temperature profiles developing in the root during warm compaction of gutta-percha with the heat sources System B and System MB Obtura (Analityc Technology, Redmond, WA, USA). Thirty extracted human incisor teeth were used. Root canals were cleaned and shaped by means of Protaper rotary files (Dentsply-Maillefer, Belgium), and imaging was performed by micro-CT (Skyscan 1072, Aartselaar, Belgium). Methods: Teeth were instrumented with K-type thermocouples, and the roots were filled with thermoplastic gutta-percha. Vertical compaction was achieved through the heat sources System B and System MB, and temperature profiles were detect-ed by means of NI Dac Interface controlled by the LabView System. With both heat sources, higher temperature levels were recorded in the region of the root far from the apex. When the warm plugger tip was positioned at a distance of 3 mm from the root apex, temperature levels of about 180°C were used to soften gutta-percha, and no statistically significant differences were observed between peak temperatures developed by the two heating sources at the root apex. However, a temperature level higher than 40°C was maintained for a longer time with System MB. Results: Statistically significant differences were observed in peak temperature levels recorded far from the root apex. Thus, with a temperature of about 180°C and the warm plugger positioned at 3 mm from the root apex, both heating sources led to a temperature slightly higher than 40°C at the apex of the root, suggesting that the gutta-percha was properly softened. Significance: A temperature level higher than 40°C was maintained for a longer time with System MB, thus providing an ad-equate time for warm compaction of the gutta-percha.

Use of Cantilever Mechanics for Impacted Teeth: Case Series

This paper describes the orthodontic treatment, and the biomechanics of cantilevers for the impaction of permanent teeth in youngs, adolescents, and adults. In these case series, multibracket straightwire fixed appliances, together with cantilever mechanics, were used to treat the impaired occlusion.