Shane D. Thompson

Atmospheric Imaging Results from the Mars Exploration Rovers: Spirit and Opportunity

A visible atmospheric optical depth of 0.9 was measured by the Spirit rover at Gusev crater and by the Opportunity rover at Meridiani Planum. Optical depth decreased by about 0.6 to 0.7% per sol through both 90-sol primary missions. The vertical distribution of atmospheric dust at Gusev crater was consistent with uniform mixing, with a measured scale height of 11.56 ± 0.62 kilometers. The dusts cross section weighted mean radius was 1.47 ± 0.21 micrometers (μm) at Gusev and 1.52 ± 0.18 μ at Meridiani. Comparison of visible optical depths with 9-μ optical depths shows a visible-to-infrared optical depth ratio of 2.0 ± 0.2 for comparison with previous monitoring of infrared optical depths.

Overview of the Spirit Mars Exploration Rover Mission to Gusev Crater: Landing site to Backstay Rock in the Columbia Hills

Spirit landed on the floor of Gusev Crater and conducted initial operations on soil-covered, rock-strewn cratered plains underlain by olivine-bearing basalts. Plains surface rocks are covered by wind-blown dust and show evidence for surface enrichment of soluble species as vein and void-filling materials and coatings. The surface enrichment is the result of a minor amount of transport and deposition by aqueous processes. Layered granular deposits were discovered in the Columbia Hills, with outcrops that tend to dip conformably with the topography. The granular rocks are interpreted to be volcanic ash and/or impact ejecta deposits that have been modified by aqueous fluids during and/or after emplacement. Soils consist of basaltic deposits that are weakly cohesive, relatively poorly sorted, and covered by a veneer of wind-blown dust. The soils have been homogenized by wind transport over at least the several kilometer length scale traversed by the rover. Mobilization of soluble species has occurred within at least two soil deposits examined. The presence of monolayers of coarse sand on wind-blown bedforms, together with even spacing of granule-sized surface clasts, suggests that some of the soil surfaces encountered by Spirit have not been modified by wind for some time. On the other hand, dust deposits on the surface and rover deck have changed during the course of the mission. Detection of dust devils, monitoring of the dust opacity and lower boundary layer, and coordinated experiments with orbiters provided new insights into atmosphere-surface dynamics.

Aeolian processes at the Mars Exploration Rover Meridiani Planum landing site

The martian surface is a natural laboratory for testing our understanding of the physics of aeolian (wind-related) processes in an environment different from that of Earth. Martian surface markings and atmospheric opacity are time-variable, indicating that fine particles at the surface are mobilized regularly by wind. Regolith (unconsolidated surface material) at the Mars Exploration Rover Opportunitys landing site has been affected greatly by wind, which has created and reoriented bedforms, sorted grains, and eroded bedrock. Aeolian features here preserve a unique record of changing wind direction and wind strength. Here we present an in situ examination of a martian bright wind streak, which provides evidence consistent with a previously proposed formational model for such features. We also show that a widely used criterion for distinguishing between aeolian saltation- and suspension-dominated grain behaviour is different on Mars, and that estimated wind friction speeds between 2 and 3 m s-1, most recently from the northwest, are associated with recent global dust storms, providing ground truth for climate model predictions.

Evidence from Opportunity's microscopic imager for water on Meridiani Planum

The Microscopic Imager on the Opportunity rover analyzed textures of soils and rocks at Meridiani Planum at a scale of 31 micrometers per pixel. The uppermost millimeter of some soils is weakly cemented, whereas other soils show little evidence of cohesion. Rock outcrops are laminated on a millimeter scale; image mosaics of cross-stratification suggest that some sediments were deposited by flowing water. Vugs in some outcrop faces are probably molds formed by dissolution of relatively soluble minerals during diagenesis. Microscopic images support the hypothesis that hematite-rich spherules observed in outcrops and soils also formed diagenetically as concretions.

Initial Results of Rover Localization and Topographic Mapping for the 2003 Mars Exploration Rover Mission

This paper presents the initial results of lander and rover localization and topographic mapping of the MER 2003 mission (by Sol 225 for Spirit and Sol 206 for Opportunity). The Spirit rover has traversed a distance of 3.2 km (actual distance traveled instead of odometry) and Opportunity at 1.2 km. We localized the landers in the Gusev Crater and on the Meridiani Planum using two-way Doppler radio positioning technology and cartographic triangulations through landmarks visible in both orbital and ground images. Additional high-resolution orbital images were taken to verify the determined lander positions. Visual odometry and bundleadjustment technologies were applied to overcome wheel slippages, azimuthal angle drift and other navigation errors (as large as 21 percent). We generated timely topographic products including 68 orthophoto maps and 3D Digital Terrain Models, eight horizontal rover traverse maps, vertical traverse profiles up to Sol 214 for Spirit and Sol 62 for

Mars Exploration Rover Geologic traverse by the Spirit rover in the Plains of Gusev Crater, Mars

The Spirit rover completed a 2.5 km traverse across gently sloping plains on the floor of Gusev crater from its location on the outer rim of Bonneville crater to the lower slopes of the Columbia Hills, Mars. Using the Athena suite of instruments in a transect approach, a systematic series of overlapping panoramic mosaics, remote sensing observations, surface analyses, and trenching operations documented the lateral variations in landforms, geologic materials, and chemistry of the surface throughout the traverse, demonstrating the ability to apply the techniques of field geology by remote rover operations. Textures and shapes of rocks within the plains are consistent with derivation from impact excavation and mixing of the upper few meters of basaltic lavas. The contact between surrounding plains and crater ejecta is generally abrupt and marked by increases in clast abundance and decimeter-scale steps in relief. Basaltic materials of the plains overlie less indurated and more altered rock types at a time-stratigraphic contact between the plains and Columbia Hills that occurs over a distance of one to two meters. This implies that regional geologic contacts are well preserved and that Earth-like field geologic mapping will be possible on Mars despite eons of overturn by small impacts.

Higher‐order harmonic signature analysis for loudspeaker defect detection

Loudspeaker assembly faults, such as a rubbing voice coil, bent frame, loose spider, etc., have traditionally been detected using experienced human listeners at the end of a production line. Previous attempts to develop production measurement systems for on‐line testing typically analyze only low‐order harmonics for the primary purpose of measuring total harmonic distortion (THD), and thus are not specifically designed to detect defective rub, buzz, and ticking sounds. This paper describes a new method wherein the total energy of high‐order harmonics groups, for example, 10th through the 20th or 31st through the 40th, are measured and analyzed. By grouping high‐order harmonics and resolving their respective total energies, distinct signatures can be obtained that correlate to the root cause of audible rub and buzz distortions [Temme (2000)]. The paper discusses loudspeakers tested with specific defects, as well as results of a computer‐based electroacoustic measurement and analysis system used for detection.