Shaun P. Garland

UNIVERSAL NANOPATTERNABLE INTERFACIAL BONDING

A nanopatternable polydimethylsiloxane (PDMS) oligomer layer is demonstrated as an interfacial adhesive for its intrinsic transferability and universal adhesiveness. Utilizing the well-established surface modification and bonding techniques of PDMS surfaces, irreversible bonding is formed (up to 400 kPa) between a wide range of substrate pairs, representing ones within and across different materials categories, including metals, ceramics, thermoset, and thermoplastic polymers.

Automated AFM force curve analysis for determining elastic modulus of biomaterials and biological samples.

The analysis of atomic force microscopy (AFM) force data requires the selection of a contact point (CP) and is often time consuming and subjective due to influence from intermolecular forces and low signal-to-noise ratios (SNR). In this report, we present an automated algorithm for the selection of CPs in AFM force data and the evaluation of elastic moduli. We propose that CP may be algorithmically easier to detect by identifying a linear elastic indentation region of data (high SNR) rather than the contact point itself (low SNR). Utilizing Hertzian mechanics, the data are fitted for the CP. We first detail the algorithm and then evaluate it on sample polymeric and biological materials. As a demonstration of automation, 64 × 64 force maps were analyzed to yield spatially varying topographical and mechanical information of cells. Finally, we compared manually selected CPs to automatically identified CPs and demonstrated that our automated approach is both accurate (< 10nm difference between manual and automatic) and precise for non-interacting polymeric materials. Our data show that the algorithm is useful for analysis of both biomaterials and biological samples.

A cell culture substrate with biologically relevant size-scale topography and compliance of the basement membrane

A growing body of literature broadly documents that a wide array of fundamental cell behaviors are modulated by the physical attributes of the cellular microenvironment, yet in vitro assays are typically carried out using tissue culture plastic or glass substrates that lack the 3-dimensional topography present in vivo and have stiffness values that far exceed that of cellular and stromal microenvironments. This work presents a method for the fabrication of thin hydrogel films that can replicate arbitrary topographies with a resolution of 400 nm that possess an elastic modulus of approximately 250 kPa. Material characterization including swelling behavior and mechanics were performed and reported. Cells cultured on these surfaces patterned with anisotropic ridges and grooves react to the biophysical cues present and show an alignment response.

Application of derivatization gas chromatography/mass spectrometry for the identification and quantitation of pinitol in plant roots.

Abstract Pinitol (D-3-O-methyl-chiro-inositol), a cyclitol, has a variety of roles in plant biology, and is being used as a nutritional supplement. These applications increase the importance of finding new methods for determining the pinitol content in plant tissues. A reliable method for the identification and quantitation of pinitol using trimethylsilyl imidazole (TMSI) derivatization and gas chromatography/mass spectrometry (GC/MS) was developed. One major ion fragment, m/z 260, was used to quantify pinitol in three plant species. Soybeans contained approximately 1.9 mg/g wet weight pinitol while levels in sugar beets and snap beans were below detection limits.

Tissue and cellular biomechanics during corneal wound injury and repair.

Corneal wound healing is an enormously complex process that requires the simultaneous cellular integration of multiple soluble biochemical cues, as well as cellular responses to the intrinsic chemistry and biophysical attributes associated with the matrix of the wound space. Here, we document how the biomechanics of the corneal stroma are altered through the course of wound repair following keratoablative procedures in rabbits. Further we documented the influence that substrate stiffness has on stromal cell mechanics. Following corneal epithelial debridement, New Zealand white rabbits underwent phototherapeutic keratectomy (PTK) on the right eye (OD). Wound healing was monitored using advanced imaging modalities. Rabbits were euthanized and corneas were harvested at various time points following PTK. Tissues were characterized for biomechanics with atomic force microscopy and with histology to assess inflammation and fibrosis. Factor analysis was performed to determine any discernable patterns in wound healing parameters. The matrix associated with the wound space was stiffest at 7days post PTK. The greatest number of inflammatory cells were observed 3days after wounding. The highest number of myofibroblasts and the greatest degree of fibrosis occurred 21days after wounding. While all clinical parameters returned to normal values 400days after wounding, the elastic modulus remained greater than pre-surgical values. Factor analysis demonstrated dynamic remodeling of stroma occurs between days 10 and 42 during corneal stromal wound repair. Elastic modulus of the anterior corneal stroma is dramatically altered following PTK and its changes coincide initially with the development of edema and inflammation, and later with formation of stromal haze and population of the wound space with myofibroblasts. Factor analysis demonstrates strongest correlation between elastic modulus, myofibroblasts, fibrosis and stromal haze thickness, and between edema and central corneal thickness. STATEMENT OF SIGNIFICANCE Tissue biomechanics during the course of corneal wound healing is documented for the first time through atomic force microscopy, and is correlated with advanced clinical imaging and immunohistochemistry. Parameters obtained from the study are applied in a multivariate statistical model to cluster the data for better classification and monitor the wound repair process. Elastic modulus of the anterior corneal stroma is dramatically altered following wounding and correlates initially with the development of edema and inflammation, and later with formation of stromal haze and population of the wound space with myofibroblasts. Importantly, the occurrence of myofibroblasts is preceded by changes in tissue mechanics, which is important to consider in light of crosslinking procedures applied to treat corneal diseases.

Print-to-Pattern Dry Film Photoresist Lithography.

Here we present facile microfabrication processes, referred to as Print-to-Pattern dry film photoresist (DFP) lithography, that utilize the combined advantages of wax printing and DFP to produce micropatterned substrates with high resolution over a large surface area in a non-cleanroom setting. The Print-to-Pattern methods can be performed in an out-of-cleanroom environment making microfabrication much more accessible to minimally equipped laboratories. Two different approaches employing either wax photomasks or wax etchmasks from a solid ink desktop printer have been demonstrated that allow the DFP to be processed in a negative tone or positive tone fashion, respectively, with resolutions of 100 μm. The effect of wax melting on resolution and as a bonding material was also characterized. In addition, solid ink printers have the capacity to pattern large areas with high resolution which was demonstrated by stacking DFP layers in a 50 mm × 50 mm woven pattern with 1 mm features. By using an office printer to generate the masking patterns, the mask designs can be easily altered in a graphic user interface to enable rapid prototyping.

Photopatternable and Photoactive Hydrogel for On-demand Generation of Hydrogen Peroxide in Cell Culture

Oxidative stress, largely mediated by reactive oxygen species (ROS), is a nearly ubiquitous component in complex biological processes such as aging and disease. Optimal in vitro methods used in elucidating disease mechanisms would deliver of low levels of hydrogen peroxide, emulating the in vivo pathological state, but current methods are limited by kinetic stability or accurate measurement of the dose administered. Here we present an in vitro platform that exploits anthraquinone catalysts for the photocatalytic production of hydrogen peroxide. This system can be dynamically tuned to provide constant generation of hydrogen peroxide at a desired physiologic rate over at least 14 days and is described using a kinetic model. Material characterization and stability is discussed along with a proof-of-concept in vitro study that assessed the viability of cells as they were oxidatively challenged over 24 h at different ROS generation rates.

Universal nano-adhesive of PDMS oligomers

A nanopatternable oligomeric PDMS layer has been first reported as a nano-interfacial adhesive for its intrinsic transferability and universal adhesiveness. Utilizing well-established PDMS surface modification and bonding techniques, we have been able to form an irreversible bond between a wide range of substrate pairs, representing ones within and across different material categories, including metals, ceramics, thermoset, and thermoplastic polymers.