Shijie Liu

A review of human exposure to polybrominated diphenyl ethers (PBDEs) in China

This paper reviews recent studies on human exposure to polybrominated diphenyl ethers (PBDEs) in China, with particular focus on external exposure routes (e.g. diet and dust ingestion, inhalation of air) and internal doses based on biomonitoring studies of PBDEs (e.g. breast milk, blood and hair). PBDE concentrations reported for fish samples collected from electronic waste (e-waste) recycling sites, PBDE manufacturing sites, local markets in selected cities and estuarine areas in China have been compiled. House dust has been a significant contributor to human exposure to PBDEs in many countries. This is especially true for toddlers, who are exposed to significantly higher doses of PBDEs than adults. Infants are also exposed to high levels of PBDEs via breast-feeding. The general populations inhalation exposure to PBDEs from household products is likely a less significant source into the indoor environment. In addition, the contribution of several exposure pathways to PBDEs among various age groups was analyzed. We found that house dust contributed most to the daily exposure to PBDEs for both toddlers and adults in urban areas of China. Furthermore, workers and residents in and around electronic recycling and PBDE manufacturing sites are exposed to the highest PBDE levels among all populations studied thus far. For the occupationally exposed populations, BDE209 was the dominant congener, in most cases. Rigorous pollution prevention and occupational protection measures are needed in China to mitigate potential health effects associated with PBDE exposures.

A review of sources, multimedia distribution and health risks of perfluoroalkyl acids (PFAAs) in China

Perfluoroalkyl acids (PFAAs) have been recognized as emerging pollutants because of their ubiquitous occurrence in the environment, biota and humans. In order to investigate their sources, fate and environmental effects, a great number of surveys have been carried out over the past several years. In the present review, we summarized the status of sources and emission, concentration, distribution and risks of PFAAs in China. Concentrations of PFAAs, especially perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) in various environmental media including water, sediment, soil, rain, snow and organisms, as well as human tissues are summarized based on the available data. Concentrations of PFAAs in aquatic systems are higher in relatively more industrialized and urbanized areas than those from the less populated and remote regions in China, indicating that their emission and distribution are closely related to regional urbanization and industrialization. PFAAs and related products have been widely used over the past several decades, which have brought about high concentrations detected in environmental matrixes, biota and even local residents. Ecological risk assessment of PFAAs is still less developed in China. Most existing studies compared concentrations of PFAAs to guideline values derived for single species to evaluate the risk. In order to reveal the transport, partitioning and degradation of PFAAs in the environment, further studies on their behavior, fate, bioaccumulation and adverse effects in different trophic levels should be conducted.

Polybrominated diphenyl ethers (PBDEs) in China: Policies and recommendations for sound management of plastics from electronic wastes

Polybrominated diphenyl ethers (PBDEs), used as flame retardants (BFRs), are incorporated in plastics of most electronic equipment. Among BFR mixtures, deca-BDE is the most widely used commercial additive in the polymer industry and the use of deca-BDE is currently not subject to any restrictions in China. However, debate over environmental and health risks associated with deca-BDE still remains. Regulatory agencies in developed countries have adopted and/or established environmentally sound strategies for the management of potential threat posed by PBDEs to the environment and human health. No regulations or management policies for PBDEs currently exist in China at either central or provincial government levels. Large amounts of plastics containing PBDEs are still in use and must be disposed of after their lifetimes, creating outdoor reservoirs for the future dispersal of PBDEs into the environment. Concerted action is needed not only to regulate the production and use of PBDEs but also to find ways to effectively manage waste electrical and electronic products that contain PBDEs. This article is the first to investigate the policy issues and current problems related to the use of PBDEs in China. In addition, we estimate the mass flows of PBDEs contained in Waste Electrical and Electronic Equipment (WEEE) in China. We suggest alternatives to PBDEs and sound management of plastics used in electrical and electronic equipment (EEE) that contain PBDEs.

Metals contamination along the watershed and estuarine areas of southern Bohai Sea, China

Distributions and magnitude of metals in water, sediment and soil collected from the watershed and estuarine areas of southern Bohai Sea, were investigated. The largest dissolved concentrations of As, Cu and Zn in water were 347.70, 2755.00, 2076.00 μg/L, respectively, much higher than corresponding drinking water guidelines. The greatest concentrations of Cu, Zn, Cr, Ni, Pb, As and Cd in sediments were 1462.2, 1602.17, 196.43, 67.15, 63.54, 73.86 and 1.41 mg/kg, dw, respectively. The mean concentrations of Cu, Ni, Cd, Zn, Cr, Pb and As in soils were 24.67, 24.73, 0.14, 64.75, 56.52, 25.12 and 9.34 mg/kg, dw, respectively. Land use was confirmed to be an important factor of influence on soil metal concentrations. Metal contents along the watershed of Jie River were significantly greater than in other locations. The detection of metals in relatively high concentrations from different environmental matrices in this region indicates the necessity of further studies.

Pollution pathways and release estimation of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) in central and eastern China

China has gradually become the most important manufacturing and consumption centre for perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) in the world, and inadvertently become the worlds major contamination hotspots. However, a systematic analysis of pollution pathways for PFOS/PFOA into the different environmental compartments and their quantification in China has yet to be carried out. This study focused on PFOS and PFOA release into the environment in the central and eastern region of China, which accounts for the vast majority of national emission. About 80-90% of PFOS/PFOA contamination in the Chinese environment was estimated to come directly from manufacturing and industrial sites mostly via wastewater discharge from these facilities. The other major contamination sources for PFOS were identified as being linked to aqueous fire-fighting foams (AFFFs), and pesticides including sulfluramid. For PFOA, following some way behind industrial wastewater, were industrial exhaust gas, domestic wastewater and landfill leachate as contamination sources. For surface water contamination, the major pollution contributors after industrial wastewater were AFFF spill runoff for PFOS, and domestic wastewater and precipitation-runoff for PFOA. The majority of PFOS that contaminated soil was considered to be linked with infiltration of AFFF and pesticides, while most PFOA in soil was attributed to atmospheric deposition and landfill leachate. Where groundwater had become contaminated, surface water seepage was estimated to contribute about 50% of PFOS and 40% of PFOA while the remainder was mostly derived from soil leaching. A review of the available monitoring data for PFOS/PFOA in the literature supported the view that industrial wastewater, landfill leachate and AFFF application were the dominant sources. Higher concentrations of PFOA than PFOS found in precipitation also corroborated the prediction of more PFOA release into air. To reduce PFOS/PFOA contamination of the Chinese environment the focus for control should be on industrial wastewater emissions.

Exploring the fate, transport and risk of Perfluorooctane Sulfonate (PFOS) in a coastal region of China using a multimedia model

Perfluorooctane Sulfonate (PFOS) and related substances have been widely applied in both industrial processes and domestic products in China. Exploring the environmental fate and transport of PFOS using modeling methods provides an important link between emission and multimedia diffusion which forms a vital part in the human health risk assessment and chemical management for these substances. In this study, the gridded fugacity based BETR model was modified to make it more suitable to model transfer processes of PFOS in a coastal region, including changes to PFOS partition coefficients to reflect the influence of water salinity on its sorption behavior. The fate and transport of PFOS in the Bohai coastal region of China were simulated under steady state with the modified version of the model. Spatially distributed emissions of PFOS and related substances in 2010 were estimated and used in these simulations. Four different emission scenarios were investigated, in which a range of half-lives for PFOS related substances were considered. Concentrations of PFOS in air, vegetation, soil, fresh water, fresh water sediment and coastal water were derived from the model under the steady-state assumption. The median modeled PFOS concentrations in fresh water, fresh water sediment and soil were 7.20ng/L, 0.39ng/g and 0.21ng/g, respectively, under Emission Scenario 2 (which assumed all PFOS related substances immediately degrade to PFOS) for the whole region, while the maximum concentrations were 47.10ng/L, 4.98ng/g and 2.49ng/g, respectively. Measured concentration data for PFOS in the Bohai coastal region around the year of 2010 were collected from the literature. The reliability of the model results was evaluated by comparing the range of modeled concentrations with the measured data, which generally matched well for the main compartments. Fate and transfer fluxes were derived from the model based on the calculated inventory within the compartments, transfer fluxes between compartments and advection fluxes between sub-regions. It showed that soil and costal water were likely to be the most important sinks of PFOS in the Bohai costal region, in which more than 90% of PFOS was stored. Flows of fresh water were the driving force for spatial transport of PFOS in this region. Influences of the seasonal change of fresh water fluxes on the model results were also analyzed. When only seasonal changes of the fresh water flow rates were considered, concentrations of PFOS in winter and spring were predicted to be higher than that under annual average conditions, while the concentrations in summer and autumn were lower. For PFOS fluxes entering the sea, opposite conclusions were drawn compared to the concentrations. Environmental risks from the presence of PFOS in fresh water were assessed for this region through comparison with available water quality criteria values. The predicted concentrations of PFOS in the Bohai coastal region provided by the model were lower than the water quality criteria published by the United States Environmental Protection Agency and Chinese researchers, while the concentrations in more than 80% of the sampling locations exceeded the European Union Water Framework Directive Environmental Quality Standards values. Seasonal variations of flow rate might cause a significant increase in environmental risks.

Factors influencing the contents of metals and As in soils around the watershed of Guanting Reservoir, China

Topsoil samples from 61 sites around the Guanting Reservoir, China, were measured for Cu, Zn, Cr, Ni, Cd, Pb and As concentrations. The mean concentrations of Cu, Zn, Cr, Ni, Cd, Pb and As were 16.8, 59.4, 37.8, 18.3, 0.32, 20.1 and 8.67 mg/kg dry weight, respectively. Factors that influence the dynamics of these metals in soils around the watersheds of Beijing reservoirs were examined. The influence of atmospheric deposition, land use, soil texture, soil type and soil chemical parameters on metal contents in soils was investigated. Atmospheric deposition, land use and soil texture were the important factors affecting heavy metal residues. Soil type and soil chemical parameters were also involved in heavy metal retention in soils. The data provided in this study are considered crucial for reservoir remediation, especially since the Guanting Reservoir will serve as one of the main drinking water sources for Beijing in the foreseeable future.

Ecological Risk Assessment of Arsenic and Metals in Surface Sediments from Estuarine and Coastal Areas of the Southern Bohai Sea, China

ABSTRACT Distribution and magnitude of arsenic and metals in surface sediments collected from the coastal and estuarine areas of the southern Bohai Sea, China, were investigated. Sediments from the estuarine and coastal areas of the Jie and Xiaoqing Rivers contained highest concentrations of arsenic, cadmium, copper, mercury, and zinc. Mean concentrations of Cu, Zn, Cr, Pb, and Cd were higher than background concentrations determined for the areas. The magnitude of both enrichment factors (EF) and geoaccumulation indices (Igeo) suggested that pollution with As and metals was occurring along estuarine and coastal areas of the southern Bohai Sea. Risk analysis also suggested that concentrations of As and metals were sufficiently elevated as to cause adverse biological effects in the study area. According to the ecological risk index (RI) values, the upstream of the Jie River has a very high ecological risk for the waterbody. The data provided in this study are considered crucial for controlling and remediation of As and metals’ pollution of the southern Bohai Sea.

Combined effects of cadmium and fluoranthene on germination, growth and photosynthesis of soybean seedlings.

The single and combinational effects of cadmium (Cd) and fluoranthene (FLT) on germination, growth and photosynthesis of soybean seedlings were investigated. Exposure to 5, 10, or 15 mg Cd/L or 1, 5, or 10 mg FLT/L individually or in combination significantly decreased germination vigor (3 days) and final germination rate of soybean seeds, except at 1 and 5 mg FLT/L. The results of two-way ANOVA analysis and the Bliss independence model showed that at lower concentrations of FLT (1 mg/L), the interaction between Cd and FLT on germination was antagonistic, whereas the interaction was synergistic when the concentration of FLT was 5 or 10 mg/L and the concentration of Cd was 15 mg/L. Growth, expressed as dry weight, length of shoot and root, leaf area, and photosynthesis, expressed as net photosynthetic rate, intercellular CO2 concentration, chlorophyll contents and fluorescence of soybean seedlings were also reduced by exposure to 5 or 10 mg Cd/L or 1 or 5 mg FLT/L, singly or jointly. Significant antagonistic effects of exposure to 5 or 10 mg Cd/L or 1 or 5 mg FLT/L on shoot growth and photosynthesis were observed, whereas synergy and antagonism of Cd and FLT were both observed for root growth.

Using gridded multimedia model to simulate spatial fate of Benzo[α]pyrene on regional scale.

Predicting the environmental multimedia fate is an essential step in the process of assessing the human exposure and health impacts of chemicals released into the environment. Multimedia fate models have been widely applied to calculate the fate and distribution of chemicals in the environment, which can serve as input to a human exposure model. In this study, a grid based multimedia fugacity model at regional scale was developed together with a case study modeling the fate and transfer of Benzo[α]pyrene (BaP) in Bohai coastal region, China. Based on the estimated emission and in-site survey in 2008, the BaP concentrations in air, vegetation, soil, fresh water, fresh water sediment and coastal water as well as the transfer fluxes were derived under the steady-state assumption. The model results were validated through comparison between the measured and modeled concentrations of BaP. The model results indicated that the predicted concentrations of BaP in air, fresh water, soil and sediment generally agreed with field observations. Model predictions suggest that soil was the dominant sink of BaP in terrestrial systems. Flow from air to soil, vegetation and costal water were three major pathways of BaP inter-media transport processes. Most of the BaP entering the sea was transferred by air flow, which was also the crucial driving force in the spatial distribution processes of BaP. The Yellow River, Liaohe River and Daliao River played an important role in the spatial transformation processes of BaP. Compared with advection outflow, degradation was more important in removal processes of BaP. Sensitivities of the model estimates to input parameters were tested. The result showed that emission rates, compartment dimensions, transport velocity and degradation rates of BaP were the most influential parameters for the model output. Monte Carlo simulation was carried out to determine parameter uncertainty, from which the coefficients of variation for the estimated BaP concentrations in air and soil were computed, which were 0.46 and 1.53, respectively. The model output-concentrations of BaP in multimedia environment can be used in human exposure and risk assessment in the Bohai coastal region. The results also provide significant indicators on the likely dominant fate, influence range of emission and transport processes determining behavior of BaP in the Bohai coastal region, which is instrumental in human exposure and risk assessment in the region.