Shou-Wei Yin

Functional properties and in vitro trypsin digestibility of red kidney bean (Phaseolus vulgaris L.) protein isolate: Effect of high-pressure treatment.

The effects of high-pressure (HP) treatment at 200-600MPa, prior to freeze-drying, on some functional properties and in vitro trypsin digestibility of vicilin-rich red kidney bean (Phaseolus vulgaris L.) protein isolate (KPI) were investigated. Surface hydrophobicity and free sulfhydryl (SH) and disulfide bond (SS) contents were also evaluated. HP treatment resulted in gradual unfolding of protein structure, as evidenced by gradual increases in fluorescence strength and SS formation from SH groups, and decrease in denaturation enthalpy change. The protein solubility of KPI was significantly improved at pressures of 400MPa or higher, possibly due to formation of soluble aggregate from insoluble precipitate. HP treatment at 200 and 400MPa significantly increased emulsifying activity index (EAI) and emulsion stability index (ESI); however, EAI was significantly decreased at 600MPa (relative to untreated KPI). The thermal stability of the vicilin component was not affected by HP treatment. Additionally, in vitro trypsin digestibility of KPI was decreased only at a pressure above 200MPa and for long incubation time (e.g., 120min). The data suggest that some physiochemical and functional properties of vicilin-rich kidney proteins can be improved by means of high-pressure treatment.

Fabrication and Characterization of Novel Antimicrobial Films Derived from Thymol-Loaded Zein–Sodium Caseinate (SC) Nanoparticles

The objective of this research was to fabricate novel antimicrobial films based on zein colloidal nanoparticles coated with sodium caseinate (SC), an emulsifier/stabilizer. Thymol-loaded zein-SC nanoparticles were prepared using an antisolvent technique, with the average particle size and zeta potential about 200 ± 20 nm and -40 mV, respectively. Zein-SC nanoparticle-based films exhibited higher mechanical resistance and water barrier capacity than the SC films and concomitant good extensibility as compared with zein films. Thymol loadings endowed zein-SC nanoparticle-based films with antimicrobial activity against Escherichia coli and Salmonella as well as DPPH radical scavenging activity. Water vapor permeability, microstructure, mechanical, and controlled release properties of the films were evaluated. The possible relationship between some selected physical properties and microstructure were also discussed. Atomic force microscopy (AFM) analysis indicated that thymol loadings resulted in the emergence phenomena of the nanoparticles to form large particles or packed structure, consisting of clusters of nanoparticles, within the film matrix, in a thymol loading dependent manner. The appearance of large particles or an agglomerate of particles may weaken the compactness of protein network of films and thus impair the water barrier capacity, mechanical resistance, and extensibility of the films. The release kinetics of thymol from nanoparticle-based films can be described as a two-step biphasic process, that is, an initial burst effect followed by subsequent slower release, and zein-SC nanoparticles within the films matrices gave them the ability to sustain the release of thymol. In addition, a schematic illustration of the formation pathway of zein-SC nanoparticle-based films with or without thymol was proposed to illuminate the possible relationship between some selected physical properties and the microstructure of the films.

Adsorption and dilatational rheology of heat-treated soy protein at the oil-water interface: relationship to structural properties.

We evaluated the influence of heat treatment on interfacial properties (adsorption at the oil-water interface and dilatational rheology of interfacial layers) of soy protein isolate. The related structural properties of protein affecting these interfacial behaviors, including protein unfolding and aggregation, surface hydrophobicity, and the state of sulfhydryl group, were also investigated. The structural and interfacial properties of soy protein depended strongly on heating temperature (90 and 120 °C). Heat treatment at 90 °C induced an increase in surface hydrophobicity due to partial unfolding of protein, accompanied by the formation of aggregates linked by disulfide bond, and lower surface pressure at long-term adsorption and similar dynamic interfacial rheology were observed as compared to native protein. Contrastingly, heat treatment at 120 °C led to a higher surface activity of the protein and rapid development of intermolecular interactions in the adsorbed layer, as evidenced by a faster increase of surface pressure and dilatational modulus. The interfacial behaviors of this heated protein may be mainly associated with more flexible conformation and high free sulfhydryl group, even if some exposed hydrophobic groups are involved in the formation of aggregates. These results would be useful to better understand the structure dependence of protein interfacial behaviors and to expand utilization of heat-treated protein in the formulation and production of emulsions.

Protein-Based Pickering Emulsion and Oil Gel Prepared by Complexes of Zein Colloidal Particles and Stearate

This paper describes the successful preparation of a protein-based Pickering emulsion, with superior stability against both coalesence and creaming, through a novel strategy of facilitating the formation of protein particles and small molecular weight surfactant complexes; these complexes are able to overcome multiple challenges including limited solubility, poor diffusive mobility, and low interfacial loading. Soluble complexes of water-insoluble corn protein, zein colloidal particles, and surfactant sodium stearate (SS) were fabricated by simple ultrasonication. Gel trapping technology combined with SEM was applied to characterize the adsorbed particles monolayer at the oil-water interface; results revealed an enhanced adsorption and targeted accumulation of zein particles at the interface with the increase of SS concentration. Partial unfolding of zein particles modified by SS above its critical complexation concentration triggered the aggregation and close packing of particles at the oil-water interface and endowed a steric barrier against the coalescence of oil droplets. Moreover, protein-based oil gels without oil leakage were obtained by one-step freeze-drying of the zein-stabilized Pickering emulsions, which could be developed to a viable strategy for structuring liquid oils into semisolid fats without the use of saturated or trans fats.

Pickering Emulsion Gels Prepared by Hydrogen-Bonded Zein/Tannic Acid Complex Colloidal Particles

Food-grade colloidal particles and complexes, which are formed via modulation of the noncovalent interactions between macromolecules and natural small molecules, can be developed as novel functional ingredients in a safe and sustainable way. For this study was prepared a novel zein/tannic acid (TA) complex colloidal particle (ZTP) based on the hydrogen-bonding interaction between zein and TA in aqueous ethanol solution by using a simple antisolvent approach. Pickering emulsion gels with high oil volume fraction (φ(oil) > 50%) were successfully fabricated via one-step homogenization. Circular dichroism (CD) and small-angle X-ray scattering (SAXS) measurements, which were used to characterize the structure of zein/TA complexes in ethanol solution, clearly showed that TA binding generated a conformational change of zein without altering their supramolecular structure at pH 5.0 and intermediate TA concentrations. Consequently, the resultant ZTP had tuned near neutral wettability (θ(ow) ∼ 86°) and enhanced interfacial reactivity, but without significantly decreased surface charge. These allowed the ZTP to stabilize the oil droplets and further triggered cross-linking to form a continuous network among and around the oil droplets and protein particles, leading to the formation of stable Pickering emulsion gels. Layer-by-layer (LbL) interfacial architecture on the oil-water surface of the droplets was observed, which implied a possibility to fabricate hierarchical interface microstructure via modulation of the noncovalent interaction between hydrophobic protein and natural polyphenol.

Functional and conformational properties of phaseolin (Phaseolus vulgris L.) and kidney bean protein isolate: a comparative study.

BACKGROUND Kidney bean (Phaseolus vulgris L.) seed is an underutilised plant protein source with good potential to be applied in the food industry. Phaseolin (also named G1 globulin) represents about 50 g kg(-1) of total storage protein in the seed. The aim of the present study was to characterise physicochemical, functional and conformational properties of phaseolin, and to compare these properties with those of kidney bean protein isolate (KPI). RESULTS Compared with kidney bean protein isolate (KPI), the acid-extracted phaseolin-rich protein product (PRP) had much lower protein recovery of 320 g kg(-1) (dry weight basis) but higher phaseolin purity (over 950 g kg(-1)). PRP contained much lower sulfhydryl (SH) and disulfide bond contents than KPI. Differential scanning calorimetry analyses showed that the phaseolin in PRP was less denatured than in KPI. Thermal analyses in the presence or absence of dithiothreitol, in combination with SH and SS content analyses showed the contributions of SS to the thermal stability of KPI. The analyses of near-UV circular dichroism and intrinsic fluorescence spectra indicated more compacted tertiary conformation of the proteins in PRP than in KPI. PRP exhibited much better protein solubility, emulsifying activity index, and gel-forming ability than KPI. The relatively poor functional properties of KPI may be associated with protein denaturation/unfolding, with subsequent protein aggregation. CONCLUSION The results presented here suggest the potential for acid-extracted PRP to be applied in food formulations, in view of its functional properties.

Formation of soy protein isolate-dextran conjugates by moderate Maillard reaction in macromolecular crowding conditions.

BACKGROUND Several methods have been reported for the conjugation of proteins with polysaccharides. Protein-polysaccharide conjugates can be formed by traditional dry heating, but this process is not attractive from an industrial viewpoint, and no commercial conjugates have been manufactured in this way. In the present study, in order to develop a more practical reaction method, macromolecular crowding was used to attach polysaccharides to proteins. RESULTS Soy protein isolate-dextran conjugates (SDCs) were prepared via the initial stage of the Maillard reaction in macromolecular crowding conditions. The impact of various processing conditions on the formation of SDCs was investigated. The optimal conditions chosen from the experiments were a soy protein isolate/dextran ratio of 1:1 (w/w), a pH of 6.5, a reaction temperature of 60 °C and a reaction time of 30 h. Circular dichroism spectroscopy showed that the secondary and tertiary structures of the conjugates were changed significantly. Structural flexibility increased, allowing better display of their functional characteristics. The conjugates had a composition with various sizes, especially macromolecules, according to gel permeation chromatography. Thermal analysis showed that the thermal stability of the conjugates was improved. CONCLUSION The production of SDCs under macromolecular crowding conditions appears to be an effective and promising technique, representing an advance over classic protein glycosylation methods.

Structural rearrangement of ethanol-denatured soy proteins by high hydrostatic pressure treatment.

The effects of high hydrostatic pressure (HHP) treatment (100-500 MPa) on solubility and structural properties of ethanol (EtOH)-denatured soy β-conglycinin and glycinin were investigated using differential scanning calorimetry, Fourier transform infrared and ultraviolet spectroscopy. HHP treatment above 200 MPa, especially at neutral and alkaline pH as well as low ionic strength, significantly improved the solubility of denatured soy proteins. Structural rearrangements of denatured β-conglycinin subjected to high pressure were confirmed, as evidenced by the increase in enthalpy value (ΔH) and the formation of the ordered supramolecular structure with stronger intramolecular hydrogen bond. HHP treatment (200-400 MPa) caused an increase in surface hydrophobicity (F(max)) of β-conglycinin, partially attributable to the exposure of the Tyr and Phe residues, whereas higher pressure (500 MPa) induced the decrease in F(max) due to hydrophobic rearrangements. The Trp residues in β-conglycinin gradually transferred into a hydrophobic environment, which might further support the finding of structural rearrangements. In contrast, increasing pressure induced the progressive unfolding of denatured glycinin, accompanied by the movement of the Tyr and Phe residues to the molecular surface of protein. These results suggested that EtOH-denatured β-conglycinin and glycinin were involved in different pathways of structural changes during HHP treatment.

Wettability, surface microstructure and mechanical properties of films based on phosphorus oxychloride-treated zein.

BACKGROUND Zein, the predominant protein in corn, has been extensively studied as an alternative packaging material in edible and biodegradable films. However, films made from 100% zein are brittle under normal conditions. The aim of this investigation was to improve the film-forming properties of zein by chemical phosphorylation. The surface hydrophobicity, surface microstructure and mechanical properties of films based on untreated and phosphorus oxychloride (POCl(3))-treated zein were evaluated and compared. The effect of POCl(3) treatment on the rheological properties of zein solutions was also studied. RESULTS POCl(3) treatment, especially at pH 7 and 9, led to an increase in the apparent viscosity of zein solutions. Atomic force microscopy (AFM) analysis showed that the film based on POCl(3) -treated zein at pH 7 had a stone-like surface microstructure with a higher roughness (R(q)) than the untreated zein film. The AFM data may partially account for the phenomenon that this film exhibited high surface hydrophobicity (H(0) ). POCl(3) treatment diminished the tensile strength (TS) of zein films from 4.83-6.67 to 1.3-2.29 MPa. However, the elongation at break (EAB) of the films at pH 7 and 9 increased from 3.0-4.5% (control film) to 150.1-122.7% (POCl(3) -treated film), indicating the potential application of zein films in wrapping foods or in non-food industries such as sugar, fruit or troche that need good extension packing materials. CONCLUSION The data presented suggest that the properties of zein films could be modulated by chemical phosphorylation treatment with POCl(3) at an appropriate pH value.

Soy lipophilic protein nanoparticles as a novel delivery vehicle for conjugated linoleic acid

Soy lipophilic protein nanoparticles (LPP), which present a novel delivery vehicle for conjugated linoleic acid (CLA), were fabricated by ultrasonication of the soy lipophilic protein (LP), which exhibits unique characteristics including a high loading capacity, oxidation protection and a sustained releasing profile in vitro for CLA. The CLA-loaded LPP exhibited a mean diameter of 170 ± 0.63 nm and a loading capacity of 26.3 ± 0.40% (w/w). A coating of sodium caseinate (SC) on the surface improved the colloidal stability of the CLA-loaded LPP. This encapsulation conferred protection against the oxidation of CLA, by which the head space-oxygen consumption and hydrogen peroxide value were obviously decreased in comparison with the SC-encapsulated CLA and CLA alone. The delivery system enables a sustained releasing profile of CLA in a simulated gastrointestinal tract (GIT). These findings illustrate that the LPP could act as an effective delivery device for CLA, which could provide oxidation stability and a sustained release property.