Shu-Jian Zheng

Sensitive and simultaneous determination of 5-methylcytosine and its oxidation products in genomic DNA by chemical derivatization coupled with liquid chromatography-tandem mass spectrometry analysis.

Cytosine methylation (5-methylcytosine, 5-mC) in genomic DNA is an important epigenetic mark that has regulatory roles in diverse biological processes. 5-mC can be oxidized stepwise by the ten-eleven translocation (TET) proteins to form 5-hydroxymethylcytosine (5-hmC), 5-formylcytosine (5-foC), and 5-carboxylcytosine (5-caC), which constitutes the active DNA demethylation pathway in mammals. Owing to the extremely limited contents of endogenous 5-mC oxidation products, no reported method can directly determine all these cytosine modifications simultaneously. In the current study, we developed selective derivatization of cytosine moieties with 2-bromo-1-(4-dimethylamino-phenyl)-ethanone (BDAPE) coupled with liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) for the simultaneous determination of these cytosine modifications in genomic DNA. The chemical derivatization notably improved the liquid chromatography separation and dramatically increased detection sensitivities of these cytosine modifications. The limits of detection (LODs) of the derivatives of 5-mC, 5-hmC, 5-foC, and 5-caC were 0.10, 0.06, 0.11, and 0.23 fmol, respectively. Using this method, we successfully quantified 5-mC, 5-hmC, 5-foC, and 5-caC in genomic DNA from human colorectal carcinoma (CRC) tissues and tumor-adjacent normal tissues. The results demonstrated significant depletion of 5-hmC, 5-foC, and 5-caC in tumor tissues compared to tumor-adjacent normal tissues, and the depletion of 5-hmC, 5-foC, and 5-caC may be a general feature of CRC; these cytosine modifications could serve as potential biomarkers for the early detection and prognosis of CRC. Moreover, the marked depletion of 5-hmC, 5-foC, and 5-caC may also have profound effects on epigenetic regulation in the development and formation of CRC.

Facile synthesis of magnetic carbon nitride nanosheets and its application in magnetic solid phase extraction for polycyclic aromatic hydrocarbons in edible oil samples.

In this study, we proposed a method to fabricate magnetic carbon nitride (CN) nanosheets by simple physical blending. Low-cost CN nanosheets prepared by urea possessed a highly π-conjugated structure; therefore the obtained composites were employed as magnetic solid-phase extraction (MSPE) sorbent for extraction of polycyclic aromatic hydrocarbons (PAHs) in edible oil samples. Moreover, sample pre-treatment time could be carried out within 10 min. Thus, a simple and cheap method for the analysis of PAHs in edible oil samples was established by coupling magnetic CN nanosheets-based MSPE with gas chromatography-mass spectrometry (GC/MS) analysis. Limits of quantitation (LOQs) for eight PAHs ranged from 0.4 to 0.9 ng/g. The intra- and inter-day relative standard deviations (RSDs) were less than 15.0%. The recoveries of PAHs for spiked soybean oil samples ranged from 91.0% to 124.1%, with RSDs of less than 10.2%. Taken together, the proposed method offers a simple and cost-effective option for the convenient analysis of PAHs in oil samples.

Stable isotope labeling – Liquid chromatography/mass spectrometry for quantitative analysis of androgenic and progestagenic steroids

Steroid hormones play important roles in mammal at very low concentrations and are associated with numerous endocrinology and oncology diseases. Therefore, quantitative analysis of steroid hormones can provide crucial information for uncovering underlying mechanisms of steroid hormones related diseases. In the current study, we developed a sensitive method for the detection of steroid hormones (progesterone, dehydroepiandrosterone, testosterone, pregnenolone, 17-hydroxyprogesterone, androstenedione and 17α-hydroxypregnenolone) in body fluids by stable isotope labeling coupled with liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) analysis. In this respect, a pair of isotopes labeling reagents, Girard reagent P (GP) and d5-Girard reagent P (d5-GP), were synthesized and utilized to label steroid hormones in follicular fluid samples and steroid hormone standards, respectively. The heavy labeled standards were used as internal standards for quantification to minimize quantitation deviation in MS analysis due to the matrix and ion suppression effects. The ionization efficiencies of steroid hormones were greatly improved by 4-504 folds through the introduction of a permanent charged moiety of quaternary ammonium from GP. Using the developed method, we successfully quantified steroid hormones in human follicular fluid. We found that the contents of testosterone and androstenedione exhibited significant increase while the content of pregnenolone had significant decrease in follicular fluid of polycystic ovarian syndrome (PCOS) patients compared with healthy controls, indicating that these steroid hormones with significant change may contribute to the pathogenesis of PCOS. Taken together, the developed stable isotope labeling coupled LC-ESI-MS/MS analysis demonstrated to be a promising method for the sensitive and accurate determination of steroid hormones, which may facilitate the in-depth investigation of steroid hormones related diseases.

Analysis of liposoluble carboxylic acids metabolome in human serum by stable isotope labeling coupled with liquid chromatography–mass spectrometry

Fatty acids (FAs) are groups of liposoluble carboxylic acids (LCAs) and play important roles in various physiological processes. Abnormal contents or changes of FAs are associated with a series of diseases. Here we developed a strategy with stable isotope labeling combined with liquid chromatography-tandem mass spectrometry (IL-LC-MS) analysis for comprehensive profiling and relative quantitation of LCAs in human serum. In this strategy, a pair of isotope labeling reagents (2-dimethylaminoethylamine (DMED)) and d4-2-dimethylaminoethylamine (d4-DMED) were employed to selectively label carboxyl groups of LCAs. The DMED and d4-DMED labeled products can lose four characteristic neutral fragments of 45 and 49Da or 63 and 67Da in collision-induced dissociation. Therefore, quadruple neutral loss scan (QNLS) mode was established and used for non-targeted profiling of LCAs. The peak pairs of DMED and d4-DMED labeling with the same retention time, intensity and characteristic mass differences were extracted from the two NLS spectra respectively, and assigned as potential LCA candidates. Using this strategy, 241 LCA candidates were discovered in the human serum; 156 carboxylic acid compounds could be determined by searching HMDB and METLIN databases (FAs are over 90%) and 21 of these LCAs were successfully identified by standards. Subsequently, a modified pseudo-targeted method with multiple reaction monitoring (MRM) detection mode was developed and used for relative quantification of LCAs in human serum from type 2 diabetes mellitus (T2DM) patients and healthy controls. As a result, 81 LCAs were found to have significant difference between T2DM patients and healthy controls. Taken together, the isotope labeling combined with tandem mass spectrometry analysis demonstrated to be a powerful strategy for identification and quantification of LCA compounds in serum samples.

Stable isotope labeling-solid phase extraction-mass spectrometry analysis for profiling of thiols and aldehydes in beer

In this study, we developed a strategy for profiling of thiols and aldehydes in beer samples by stable isotope labeling-solid phase extraction-liquid chromatography-double precursor ion scan/double neutral loss scan-mass spectrometry analysis (SIL-SPE-LC-DPIS/DNLS-MS). A pair of isotope reagents (ω-bromoacetonylquinolinium bromide, BQB; ω-bromoacetonylquinolinium-d7 bromide, BQB-d7) were used to label thiols; while for the aldehydes, a pair of isotope reagents (4-(2-(trimethylammonio) ethoxy) benzenaminium halide, 4-APC; 4-(2-(trimethylammonio) ethoxy) benzenaminium halide-d4, 4-APC-d4) were used. The labeled thiols and aldehydes were extracted and purified with solid-phase extraction, respectively, followed by LC-MS analysis. Using the proposed SIL-SPE-LC-DPIS/DNLS-MS methods, 76 thiol and 25 aldehyde candidates were found in beer. Furthermore, we established SIL-SPE-LC-MRM-MS methods for the relative quantitation of thiols and aldehydes in different beer samples. The results showed that the contents of thiols and aldehydes are closely related to the brands and origins of beers.

Comprehensive Profiling of Fecal Metabolome of Mice by Integrated Chemical Isotope Labeling-Mass Spectrometry Analysis

Gut microbiota plays important roles in the host health. The host and symbiotic gut microbiota coproduce a large number of metabolites during the metabolism of food and xenobiotics. The analysis of fecal metabolites can provide a noninvasive manner to study the outcome of the host-gut microbiota interaction. Herein, we reported the comprehensive profiling of fecal metabolome of mice by an integrated chemical isotope labeling combined with liquid chromatography-mass spectrometry (CIL-LC-MS) analysis. The metabolites are categorized into several submetabolomes based on the functional moieties (i.e., carboxyl, carbonyl, amine, and thiol) and then analysis of the individual submetabolome was performed. The combined data from the submetabolome form the metabolome with relatively high coverage. To this end, we synthesized stable isotope labeling reagents to label metabolites with different groups, including carboxyl, carbonyl, amine, and thiol groups. We detected 2302 potential metabolites, among which, 1388 could be positively or putatively identified in feces of mice. We then further confirmed 308 metabolites based on our established library of chemically labeled standards and tandem mass spectrometry analysis. With the identified metabolites in feces of mice, we established mice fecal metabolome database, which can be used to readily identify metabolites from feces of mice. Furthermore, we discovered 211 fecal metabolites exhibited significant difference between Alzheimers disease (AD) model mice and wild type (WT) mice, which suggests the close correlation between the fecal metabolites and AD pathology and provides new potential biomarkers for the diagnosis of AD.

Metabolic analysis of the melatonin biosynthesis pathway using chemical labeling coupled with liquid chromatography-mass spectrometry

Characterization of the melatonin (MLT) biosynthesis pathway in plants is still limited. Additionally, a metabolomic analysis of MLT biosynthesis in plants is still a challenge due to analyte structural and chemical diversity, low analyte abundances, and plant matrix complexities. Herein, a sensitive liquid chromatography‐mass spectrometry (LC‐MS) method enabling the simultaneous determination of seven plant MLT biosynthetic metabolites was developed. In the proposed strategy, the targeted metabolites, which included tryptophan (Trp), tryptamine (TAM), 5‐hydroxytryptophan (5HTP), serotonin (5HT), N‐acetylserotonin (NAS), 5‐methoxytryptamine (5MT), and MLT, were purified from plant extracts using a one‐step dispersive solid‐phase extraction (DSPE). The samples were then chemically labeled with dansyl chloride (DNS‐Cl), followed by analysis using LC‐MS. The limit of detection (LOD) values ranged from 0.03 to 1.36 pg/mL and presented a 22‐ to 469‐fold decrease when compared to the unlabeled metabolites. Due to the high sensitivity of the proposed method, the consumption of plant materials was reduced to 10 mg FW. Ultimately, the established method was utilized to examine the distributions of MLT and its intermediates in rice shoots and roots with or without cadmium (Cd) stress. The results suggested that under normal condition, MLT may also be generated via a Trp/TAM/5HT/5MT/MLT path (Pathway II) in addition to the previously reported Trp/TAM/5HT/NAS/MLT path (Pathway I), although Pathway I was shown to be dominant. During Cd stress, MLT was also shown to be produced through these two pathways, with Pathway II shown to be dominant in rice shoots and roots.

Stable isotope labeling - dispersive solid phase extraction - liquid chromatography - tandem mass spectrometry for quantitative analysis of transsulfuration pathway thiols in human serum

Low-molecular-weight thiols play important roles in a variety of pathological processes and are closely associated with a wide range of diseases. In this study, a selective and sensitive method was developed for the simultaneous determination of all the 7 thiols occurring in the transsulfuration pathway (Cysteine (Cys), homocysteine (Hcys), glutathione (GSH), N-acetylcysteine (Nac), cysteinylglycine (CysGly), glutamylcysteine (GluCys) and cysteamine (CA)) in human serum by in-vitro stable isotope labeling - dispersive solid phase extraction - liquid chromatography - tandem mass spectrometry analysis (IL-DSPE-LC-MS/MS). In the proposed method, a pair of stable isotope-labeling reagents, BQB (ω-bromoacetonylquinolinium bromide) and BQB-D7, were utilized to label thiols in human serum samples and thiol standards, respectively. The BQB labeled thiols which carry a positive charge were extracted and purified with C8-SO3H-based DSPE followed by LC-MS/MS analysis. Good linearities for 7 thiols occurring in the transsulfuration pathway were obtained with the coefficient of determination (R2) >0.9901. The limits of detection (LODs) were in the range of 0.7-6.0 nmol/L. The method was further applied to investigate the contents change of 7 thiols in human serum samples of type 2 diabetes mellitus (T2DM) patients and breast cancer (BC) patients. The results showed that the contents of these thiols occurring in the transsulfuration pathway significantly changed and were highly diseases-related. In addition, partial least squares discriminant analysis (PLS-DA) suggested excellent classification performance between patients and healthy controls. The findings indicated that these significantly changed thiols occurring in the transsulfuration pathway in T2DM patients and BC patients might serve as the indicator for the diagnosis of T2DM and BC. Taken together, the developed IL-DSPE-LC-MS/MS method provides a promising tool for the sensitive analysis of thiols from complex biological samples, which may promote the in-depth investigation of the functions of thiols.

Establishment of Liquid Chromatography Retention Index Based on Chemical Labeling for Metabolomic Analysis

Chemical labeling (CL) in combination with liquid chromatography-mass spectrometry (LC-MS) analysis has been demonstrated to be a promising technology in metabolomic analysis. However, identification of chemically labeled metabolites remains to be challenging. Retention time (RT) is one of the most important parameters for the identification of metabolites, but it could vary greatly in LC-MS analysis. In this work, we developed a chemical labeling-based HPLC retention index (CL-HPLC RI) strategy to facilitate the identification of metabolites. In this CL-HPLC RI strategy, a series of 2-dimethylaminoethylamine (DMED)-labeled fatty acids were used as calibrants to establish RIs for DMED-labeled carboxylated compounds and a series of 4-( N, N-dimethylamino)phenyl isothiocyanate (DMAP)-labeled fatty amines were used as calibrants for DMAP-labeled amine compunds. To calculate the RIs, the whole LC chromatogram was divided into 24 time intervals by 23 DMED-labeled fatty acid standards or 15 time intervals by 14 DMAP-labeled fatty amine standards. Then, we established the RIs of 854 detected DMED-labeled carboxylated metabolites and 1057 DMAP-labeled amine metabolites in fecal samples and demonstrated that RIs were highly reproducible under different elution gradients, columns, and instrument systems. Finally, we applied this strategy to the identification of metabolites in human serum. Using RIs, 267 DMED-labeled carboxylated metabolites and 273 DMAP-labeled amine metabolites in human serum matched well with the fecal metabolome database. Taken together, the developed CL-HPLC RI strategy was demonstrated to be a promising method to facilitate the identification of metabolites in metabolomic analysis.

Metal oxide-based dispersive solid-phase extraction coupled with mass spectrometry analysis for determination of ribose conjugates in human follicular fluid

Polycystic ovary syndrome (PCOS) is the most common cause of anovulatory infertility. The pathogenesis of PCOS remains unclear and early diagnosis of PCOS is challenging. Follicular fluid provides a unique window in the critical processes during oocyte and follicular maturation, and the metabolic level of follicular fluid has important impact on the developmental potential of oocytes and subsequent embryos. Previous studies demonstrated some modified ribonucleosides in biological fluids were diseases related metabolites. In this respect, analysis of endogenous modified ribonucleosides in follicular fluids will facilitate the investigation of follicular development. Here, we developed a strategy for determination of ribose conjugates from follicular fluid using metal oxide-based dispersive solid-phase extraction (DSPE) coupled with liquid chromatography-multiple reaction monitoring-mass spectrometry analysis (DSPE-LC-MRM-MS/MS). Cerium dioxide (CeO2) was used to selectively recognize and capture cis-diol containing ribose conjugates from complex biological samples under basic environment. The trapped ribose conjugates were then easily released under acidic environment. The results showed that 50 potential ribose conjugates were detected in follicular fluid by the developed DSPE-LC-MRM-MS/MS method. We then further investigated the contents change of the detected ribose conjugates in follicular fluid from PCOS patients. The results indicated that the follicular fluid from healthy controls and PCOS patients can be clearly differentiated with the partial least squares-discriminate analysis (PLS-DA) based on the detected ribose conjugates. In addition, the contents of 8 ribose conjugates were significantly different between PCOS patients and healthy controls, which could potentially serve as the indicator of PCOS.