Shu-Wei Chou

Hierarchically Structured Ni3S2/Carbon Nanotube Composites as High Performance Cathode Materials for Asymmetric Supercapacitors

The Ni3S2 nanoparticles with the diameters ranging from 10 to 80 nm are grown on the backbone of conductive multiwalled carbon nanotubes (MWCNTs) using a glucose-assisted hydrothermal method. It is found that the Ni3S2 nanoparticles deposited on MWCNTs disassemble into smaller components after the composite electrode is activated by the consecutive cyclic voltammetry scan in a 2 M KOH solution. Therefore, the active surface area of the Ni3S2 nanoparticles is increased, which further enhances the capacitive performance of the composite electrode. Because the synergistic effect of the Ni3S2 nanoparticles and MWCNTs on the capacitive performance of the composite electrode is pronounced, the composite electrode shows a high specific capacitance of 800 F/g and great cycling stability at a current density of 3.2 A/g. To examine the capacitive performance of the composite electrode in a full-cell configuration, an asymmetric supercapacitor device was fabricated by using the composite of Ni3S2 and MWCNTs as the cathode and activated carbon as the anode. The fabricated device can be operated reversibly between 0 and 1.6 V, and obtain a high specific capacitance of 55.8 F/g at 1 A/g, which delivers a maximum energy density of 19.8 Wh/kg at a power density of 798 W/kg. Furthermore, the asymmetric supercapacitor shows great stability based on the fact that the device retains 90% of its initial capacitance after a consecutive 5000 cycles of galvanostatic charge-discharge performed at a current density of 4 A/g.

Few-layer MoS2 nanosheets coated onto multi-walled carbon nanotubes as a low-cost and highly electrocatalytic counter electrode for dye-sensitized solar cells

In the current study, the nanocomposite of molybdenum disulfide and multi-walled carbon nanotubes (MWCNT@MoS2) was proposed for the first time as a counter electrode (CE) catalyst in dye-sensitized solar cells (DSSCs) to speed up the reduction of triiodide (I3−) to iodide (I−). This novel catalyst was synthesized by simply mixing MWCNTs and MoS2 in an acidic solution and then converting the solid intermediate into the MWCNT@MoS2 nanocomposite in a H2 flow at 650 °C. X-ray powder diffraction, Raman and X-ray photoemission spectroscopy confirmed the composition and the structure of the MWCNT@MoS2 nanocomposite. The microstructure details of the nanocomposite were studied by transmission electron microscopy, showing that only a few-layers of the MoS2 nanosheets were formed on the MWCNT surface. This unique structure is beneficial to the improvement of the catalytic activity of MWCNT@MoS2 towards the reduction of I3−. The extensive cyclic voltammograms (CV) showed that the cathodic current density of the MWCNT@MoS2 CE was higher than those of MoS2, MWCNT and sputtered Pt CEs due to the increased active surface area of the former. Moreover, the peak current densities of the MWCNT@MoS2 CE showed no sign of degradation after consecutive 100 CV tests, suggesting the great electrochemical stability of the MWCNT@MoS2 CE. Furthermore, the MWCNT@MoS2 CE demonstrated an impressive low charge-transfer resistance (1.69 Ω cm2) for I3− reduction. Finally, the DSSC assembled with the MWCNT@MoS2 CE showed a high power conversion efficiency of 6.45%, which is comparable to the DSSC with Pt CE (6.41%).

Facile synthesis of MoS2/graphene nanocomposite with high catalytic activity toward triiodide reduction in dye-sensitized solar cells

In the current study, a nanocomposite of molybdenum disulfide and graphene (MoS2/RGO) was proposed for the first time as the counter electrode (CE) catalyst in dye-sensitized solar cells (DSSCs) to speed up the reduction of triiodide (I3−) to iodide (I−). This novel catalyst was synthesized by simply mixing graphene oxide nanosheets with a solution of ammonium tetrathiomolybdate and then converting the solid intermediate into MoS2/RGO nanocomposite in a H2 flow at 650 °C. Atomic force microscopy, X-ray powder diffraction and X-ray photoemission spectroscopy confirmed that MoS2 nanoparticles were deposited onto the graphene surface. The extensive cyclic voltammograms (CV) showed that the cathodic current density of the MoS2/RGO CE was higher than those of MoS2, RGO and sputtered Pt CEs, due to the increased active surface area of the former. Moreover, the peak current densities of the MoS2/RGO CE showed no sign of degradation after 100 consecutive CV tests, suggesting the great electrochemical stability of the MoS2/RGO CE. Furthermore, the MoS2/RGO CE demonstrated an impressively low charge-transfer resistance (0.57 Ω cm2) for I3− reduction. Finally, the DSSC assembled with the MoS2/RGO CE showed a high power conversion efficiency of 6.04%, which is comparable to the DSSC with a Pt CE (6.38%).

Pulse electropolymerization of high performance PEDOT/MWCNT counter electrodes for Pt-free dye-sensitized solar cells

High performance poly(3,4-ethylenedioxythiophene) (PEDOT) nano-meadows were electropolymerized onto multi-wall carbon nanotube (MWCNT) as counter electrodes (CEs) for Pt-free dye-sensitized solar cells (DSCs) for the first time. This composite film was fabricated using an electrophoresis of MWCNTs onto a fluorinated tin oxide glass substrate and then subjected to PEDOT electropolymerization by using the pulse potentiostatic method. The surface of MWCNTs was wrapped with nano-meadows PEDOT thin film of ∼55 nm in thickness. The extensive cyclic voltammograms (CV) showed PEDOT/MWCNT CE with excellent electrocatalytic activity for I3− reduction. Moreover, the peak current densities of the PEDOT/MWCNT CE showed no sign of degradation after consecutive 200 CV tests, suggesting the great electrochemical stability of the PEDOT/MWCNT CE. The electrochemical impedance spectroscopy demonstrated that the PEDOT/MWCNT CE had the lowest charge-transfer resistance among all CEs tested in this study. The DSC assembled with the PEDOT/MWCNT composite CE demonstrated an enhanced photovoltaic conversion efficiency of 7.03% compared to that using conventional Pt CE (5.88%) under full sunlight illumination (100 mW cm−2, AM1.5 G) due to the intrinsic superior electrocatalytic activity of the nano-meadows PEDOT material, highly specific surface area and high electrical conductivity of the MWCNTs. Therefore, the PEDOT/MWCNT CE can be considered as a promising alternative CE for use in Pt-free DSCs.

Cathodic deposition of interlaced nanosheet-like cobalt sulfide films for high-performance supercapacitors

In this study, an interlaced nanosheet-like cobalt sulfide (CoS) electroactive material was deposited on a Ni foam substrate using a facile and efficient electrochemical route and employed as a high-performance supercapacitor for the first time. An impressive specific capacitance, as high as 1471 F g−1 at 4 A g−1, was achieved for the interlaced nanosheet-like CoS electroactive material in 1.0 M KOH aqueous electrolyte. It delivered a remarkable specific capacitance of up to 1306 F g−1 even at a high charge–discharge current density of 40 A g−1, indicating its excellent energy storage at high rates. Moreover, nearly 100% retention of specific capacitance and >99% Coulombic efficiency were achieved even after consecutive 1000 cycles with a fairly high current density of 8 A g−1.

Ni3S2/Ni-P bilayer coated on polyimide as a Pt- and TCO-free flexible counter electrode for dye-sensitized solar cells.

In this study, we reported an efficient, flexible, and low-cost (Pt-free and transparent conducting oxide (TCO)-free) counter electrode (CE) made of a polyimide (PI) substrate coated with a Ni3S2/Ni-P bilayer for dye-sensitized solar cells (DSCs). The bilayer Ni3S2/Ni-P hybrid film was deposited on a PI plastic substrate via a series of wet chemical/electrochemical processes. The bottom Ni-P layer was deposited on a PI to replace conventional TCO as a conductive layer, and the top Ni3S2 layer was employed as the electrocatalyst for I3(-) reduction. On the basis of the extensive electrochemical measurments, the as-prepared Ni3S2/Ni-P coated PI flexible CE demonstrated a Pt-like electrocatalytic for I3(-) reduction. As a result, the DSC assembled with the Ni3S2/Ni-P coated PI flexible CE exhibited an impressive photovoltaic conversion efficiency of 6.28% accompanied by a fill factor of 0.63 under 1 sun illumination (100 mW cm(-2), AM 1.5), which is comparative to that of the DSC based on the Pt coated indium tin oxide/polyethylene naphthalate (ITO/PEN) CE.

Multi-wall carbon nanotube counter electrodes for dye-sensitized solar cells prepared by electrophoretic deposition

In this study, electrophoretic deposition (EPD) was employed to fabricate multi-wall carbon nanotube (MWCNT) counter electrodes (CEs) for dye-sensitized solar cells (DSSCs). Firstly, raw MWCNTs were functionalized by means of an acid mixture solution and then subjected to EPD. The results obtained from Raman spectroscopy, Fourier transform infrared spectroscopy, field-emission scanning electron microscope, and cyclic voltammogram demonstrated that the defects and open ends on the MWCNTs can be obtained via chemical functionalization and thus facilitate the enhancement in the electrocatalytic activity for I3− reduction of MWCNT CEs. In addition to optimizing chemical functionalization of MWCNTs surface, the optimal thickness of MWCNT CEs prepared by EPD was also investigated. Additionally, consecutive cyclic voltammetric tests demonstrated that the MWCNT CE fabricated by EPD possessed excellent electrochemical stability. In comparison with MWCNT CEs fabricated by tape-casting approach, MWCNT CEs prepared by EPD presented a superior adhesion between MWCNT deposits and conducting glass substrates. Therefore, MWCNT CEs fabricated by EPD can be of great potential for use in low-cost plastic DSSCs.