Shunbo Li

Continuous particle focusing in a waved microchannel using negative dc dielectrophoresis

We present a waved microchannel for continuous focusing of microparticles and cells using negative direct current (dc) dielectrophoresis. The waved channel is composed of consecutive s-shaped curved channels in series to generate an electric field gradient required for the dielectrophoretic effect. When particles move electrokinetically through the channel, the experienced negative dielectrophoretic forces alternate directions within two adjacent semicircular microchannels, leading to a focused continuous-flow stream along the channel centerline. Both the experimentally observed and numerically simulated results of the focusing performance are reported, which coincide acceptably in proportion to the specified dimensions (i.e. inlet and outlet of the waved channel). How the applied electric field, particle size and medium concentration affect the performance was studied by focusing polystyrene microparticles of varying sizes. As an application in the field of biology, the focusing of yeast cells in the waved mcirochannel was tested. This waved microchannel shows a great potential for microflow cytometry applications and is expected to be widely used before different processing steps in lab-on-a-chip devices with integrated functions.

Fano effect of metamaterial resonance in terahertz extraordinary transmission

We show that the terahertz resonant transmission through metal hole array can be tailored by filling the holes with metamaterials. Experiment and finite difference time domain simulations show this type of resonant transmission to be induced by locally resonant modes, instead of the usual lateral surface grating mode. As the metamaterial’s local resonances can be manipulated by varying their geometric configurations, this type of resonant transmission can be tuned over a broad frequency regime that is subwavelength to the array periodicity, with a transmission profile that can also be tailored by the frequency location of the resonance. Such tunability of resonant transmission, with its attendant enhanced local field intensity in the vicinity of the aperture, may provide some potential applications.

Micro-Raman and photoluminescence studies of neutron-irradiated gallium nitride epilayers

GaN epilayers grown on sapphire substrate were irradiated with various dosages of neutrons and were characterized using Micro-Raman and photoluminescence. It was found that the A1(LO) peak in the Raman spectra clearly shifted with neutron irradiation dosage. Careful curve fitting of the Raman data was carried out to obtain the carrier concentration which was found to vary with the neutron irradiation dosage. The variation of the full width at half maximum height of the photoluminescence was consistent with the Raman results. The neutron irradiation-induced structural defects (likely to be GeGa) give rise to carrier trap centers which are responsible for the observed reduction in carrier concentration of the irradiated GaN.

Continuous manipulation and separation of particles using combined obstacle- and curvature-induced direct current dielectrophoresis

This paper presents a novel dielectrophoresis‐based microfluidic device incorporating round hurdles within an S‐shaped microchannel for continuous manipulation and separation of microparticles. Local nonuniform electric fields are generated due to the combined effects of obstacle and curvature, which in turn induce negative dielectrophoresis forces exerting on the particle that transport throughout the microchannel electrokinetically. Experiments were conducted to demonstrate the controlled trajectories of fix‐sized (i.e. 10 or 15x μm) polystyrene particles, and size‐dependent separation of 10 and 15 μm particles by adjusting the applied voltages at the inlet and outlets. Numerical simulations were also performed to predict the particle trajectories, which showed reasonable agreement with experimentally observed results. Compared to other microchannel designs that make use of either obstacle or curvature individually for inhomogeneous electric fields, the developed microchannel offers advantages such as improved controllability of particle motion, lower requirement of applied voltage, reduced fouling, and particle adhesion, etc.

Applications of Micro/Nanoparticles in Microfluidic Sensors: A Review

This paper reviews the applications of micro/nanoparticles in microfluidics device fabrication and analytical processing. In general, researchers have focused on two properties of particles—electric behavior and magnetic behavior. The applications of micro/nanoparticles could be summarized on the chip fabrication level and on the processing level. In the fabrication of microfluidic chips (chip fabrication level), particles are good additives in polydimethylsiloxane (PDMS) to prepare conductive or magnetic composites which have wide applications in sensors, valves and actuators. On the other hand, particles could be manipulated according to their electric and magnetic properties under external electric and magnetic fields when they are travelling in microchannels (processing level). Researchers have made a great progress in preparing modified PDMS and investigating the behaviors of particles in microchannels. This article attempts to present a discussion on the basis of particles applications in microfluidics.

Structural dependence of silver nanowires on polyvinyl pyrrolidone (PVP) chain length

The effect of the chain length of polyvinyl pyrrolidone (PVP) on the structures of silver nanowires (AgNWs) is explored in this study. It was found in the experiments that PVP, when serving as a capping agent, has a great impact on the morphology and structure of AgNWs. By means of a series of experiments and the inquiry of the growth mechanism, the critical minimum PVP chain length for the successful formation of uniform nanowires was discovered, below which only nanoparticles or short nanorods can be obtained. Surprisingly, a core-shell structure of a nanowire with a polycrystal was observed when PVP with a very long chain length was employed in the processing.

High-throughput particle manipulation by hydrodynamic, electrokinetic, and dielectrophoretic effects in an integrated microfluidic chip

Integrating different steps on a chip for cell manipulations and sample preparation is of foremost importance to fully take advantage of microfluidic possibilities, and therefore make tests faster, cheaper and more accurate. We demonstrated particle manipulation in an integrated microfluidic device by applying hydrodynamic, electroosmotic (EO), electrophoretic (EP), and dielectrophoretic (DEP) forces. The process involves generation of fluid flow by pressure difference, particle trapping by DEP force, and particle redirect by EO and EP forces. Both DC and AC signals were applied, taking advantages of DC EP, EO and AC DEP for on-chip particle manipulation. Since different types of particles respond differently to these signals, variations of DC and AC signals are capable to handle complex and highly variable colloidal and biological samples. The proposed technique can operate in a high-throughput manner with thirteen independent channels in radial directions for enrichment and separation in microfluidic chip. We evaluated our approach by collecting Polystyrene particles, yeast cells, and E. coli bacteria, which respond differently to electric field gradient. Live and dead yeast cells were separated successfully, validating the capability of our device to separate highly similar cells. Our results showed that this technique could achieve fast pre-concentration of colloidal particles and cells and separation of cells depending on their vitality. Hydrodynamic, DC electrophoretic and DC electroosmotic forces were used together instead of syringe pump to achieve sufficient fluid flow and particle mobility for particle trapping and sorting. By eliminating bulky mechanical pumps, this new technique has wide applications for in situ detection and analysis.

A Simple Approach for Local Contact Angle Determination on a Heterogeneous Surface

We report a simple approach for measuring the local contact angle of liquids on a heterogeneous surface consisting of intersected hydrophobic and hydrophilic patch arrays, specifically by employing confocal microscopy and the addition of a very low concentration of Rhodamine-B (RB) (2 × 10(-7) mol/L). Interestingly, RB at that concentration was found to be aggregated at the air-liquid and solid (hydrophobic patch only)-liquid interfaces, which helps us to distinguish the liquid and solid interfaces as well as hydrophobic and hydrophilic patches by their corresponding fluorescent intensities. From the measured local contact angles, the line tension can be easily derived and the value is found to be (-2.06-1.53) × 10(-6) J/m.

Facile and high spatial resolution ratio-metric luminescence thermal mapping in microfluidics by near infrared excited upconversion nanoparticles

A local area temperature monitor is important for precise control of chemical and biological processes in microfluidics. In this work, we developed a facile method to realize micron spatial resolution of temperature mapping in a microfluidic channel quickly and cost effectively. Based on the temperature dependent fluorescence emission of NaYF4:Yb3+, Er3+ upconversion nanoparticles (UCNPs) under near-infrared irradiation, ratio-metric imaging of UCNPs doped polydimethylsiloxane can map detailed temperature distribution in the channel. Unlike some reported strategies that utilize temperature sensitive organic dye (such as Rhodamine) to achieve thermal sensing, our method is highly chemically inert and physically stable without any performance degradation in long term operation. Moreover, this method can be easily scaled up or down, since the spatial and temperature resolution is determined by an optical imaging system. Our method supplied a simple and efficient solution for temperature mapping on a heteroge...

Microfluidic device for controllable chemical release via field-actuated membrane incorporating nanoparticles

We report a robust magnetic-membrane-based microfluidic platform for controllable chemical release. The magnetic membrane was prepared by mixing polydimethylsiloxane (PDMS) and carbonyl-iron nanoparticles together to obtain a flexible thin film. With combined, simultaneous regulation of magnetic stimulus and mechanical pumping, the desired chemical release rate can easily be realized. For example, the dose release experimental data was well fitted by a mathematical sigmoidal model, exhibiting a typical dose-response relationship, which shows promise in providing significant guidance for on-demand drug delivery. To test the platforms feasibility, our microfluidic device was employed in an experiment involving Escherichia coli culture under controlled antibiotic ciprofloxacin exposure, and the expected outcomes were successfully obtained. Our experimental results indicate that such a microfluidic device, with high accuracy and easy manipulation properties, can legitimately be characterized as active chemical release system.