Silvia H. De Paoli Lacerda

Interaction of gold nanoparticles with common human blood proteins

In order to better understand the physical basis of the biological activity of nanoparticles (NPs) in nanomedicine applications and under conditions of environmental exposure, we performed an array of photophysical measurements to quantify the interaction of model gold NPs having a wide range of NP diameters with common blood proteins. In particular, absorbance, fluorescence quenching, circular dichroism, dynamic light scattering, and electron microscopy measurements were performed on surface-functionalized water-soluble gold NPs having a diameter range from 5 to 100 nm in the presence of common human blood proteins: albumin, fibrinogen, gamma-globulin, histone, and insulin. We find that the gold NPs strongly associate with these essential blood proteins where the binding constant, K, as well as the degree of cooperativity of particle--protein binding (Hill constant, n), depends on particle size and the native protein structure. We also find tentative evidence that the model proteins undergo conformational change upon association with the NPs and that the thickness of the adsorbed protein layer (bare NP diameter <50 nm) progressively increases with NP size, effects that have potential general importance for understanding NP aggregation in biological media and the interaction of NP with biological materials broadly.

Microfluidic Directed Self-Assembly of Liposome-Hydrogel Hybrid Nanoparticles

We present a microfluidic method to direct the self-assembly of temperature-sensitive liposome-hydrogel hybrid nanoparticles. Our approach yields nanoparticles with structural properties and highly monodisperse size distributions precisely controlled across a broad range relevant to the targeted delivery and controlled release of encapsulated therapeutic agents. We used microfluidic hydrodynamic focusing to control the convective-diffusive mixing of two miscible nanoparticle precursor solutions (a DPPC:cholesterol:DCP phospholipid formulation in isopropanol and a photopolymerizable N-isopropylacrylamide mixture in aqueous buffer) to form nanoscale lipid vesicles with encapsulated hydrogel precursors. These precursor nanoparticles were collected off-chip and were irradiated with ultraviolet (UV) light in bulk to polymerize the nanoparticle interiors into hydrogel cores. Multiangle laser light scattering in conjunction with asymmetric flow field-flow fractionation was used to characterize nanoparticle size distributions, which spanned the approximately 150 to approximately 300 nm diameter range as controlled by microfluidic mixing conditions, with a polydispersity of approximately 3% to approximately 5% (relative standard deviation). Transmission electron microscopy was then used to confirm the spherical shape and core-shell composition of the hybrid nanoparticles. This method may be extended to the directed self-assembly of other similar cross-linked hybrid nanoparticle systems with engineered size/structure-function relationships for practical use in healthcare and life science applications.

Langmuir Adsorption Study of the Interaction of CdSe/ZnS Quantum Dots with Model Substrates: Influence of Substrate Surface Chemistry and pH

We investigate the utility of Langmuir adsorption measurements for characterizing nanoparticle-substrate interactions. Spherical CdSe/ZnS core-shell nanoparticles were chosen as representative particles because of their widespread use in biological labeling measurements and their relatively monodisperse dimensions. In particular, the quantum dots were functionalized with 11-mercaptoundecanoic acid, and we utilized an amine-terminated self-assembled monolayer (SAM) as a model substrate. SAMs with different end-groups (-CH(3) and -COOH) were also considered to contrast with the adsorption behavior on the amine-terminated SAM substrates. We followed the kinetics of nanoparticle adsorption on the aminosilane layer by quartz crystal microgravimetry (QCM) over a range of particle concentrations and determined the corresponding Langmuir adsorption isotherms. Analysis of both equilibrium adsorption and kinetic adsorption data allowed us to determine a consistent value of the Langmuir adsorption equilibrium constant for the amine-terminated SAM at room temperature (K(L) approximately 2.7 (micromol/L)(-1)), providing a useful characterization of the nanoparticle-substrate interaction. The effect of varying solution pH on Langmuir adsorption was also investigated in order to gain insight into the role of electrostatic interactions on nanoparticle adsorption. The equilibrium extent of adsorption was found to be maximum at about pH 7. These changes of nanoparticle adsorption were further quantified and validated by X-ray photoelectron spectroscopy (XPS) and confocal fluorescence microscopy measurements. We conclude that Langmuir adsorption measurements provide a promising approach for quantifying nanoparticle-substrate interactions.

Carbon nanotubes activate store-operated calcium entry in human blood platelets.

Carbon nanotubes (CNTs) are known to potentiate arterial thrombosis in animal models, which raises serious safety issues concerning environmental or occupational exposure to CNTs and their use in various biomedical applications. We have shown previously that different CNTs, but not fullerene (nC60), induce the aggregation of human blood platelets. To date, however, a mechanism of potentially thrombogenic CNT-induced platelet activation has not been elucidated. Here we show that pristine multiwalled CNTs (MWCNTs) penetrate platelet plasma membrane without any discernible damage but interact with the dense tubular system (DTS) causing depletion of platelet intracellular Ca(2+) stores. This process is accompanied by the clustering of stromal interaction molecule 1 (STIM1) colocalized with Orai1, indicating the activation of store-operated Ca(2+) entry (SOCE). Our findings reveal the molecular mechanism of CNT-induced platelet activation which is critical in the evaluation of the biocompatibility of carbon nanomaterials with blood.

Quantitative Characterization of Quantum Dot-Labeled Lambda Phage for Escherichia coli Detection

We characterize CdSe/ZnS quantum dot (QD) binding to genetically modified bacteriophage as a model for bacterial detection. Interactions among QDs, lambda (λ) phage, and Escherichia coli are examined by several cross‐validated methods. Flow and image‐based cytometry clarify fluorescent labeling of bacteria, with image‐based cytometry additionally reporting the number of decorated phage bound to cells. Transmission electron microscopy, image‐based cytometry, and electrospray differential mobility analysis allow quantization of QDs attached to each phage (4–17 QDs) and show that λ phage used in this study exhibits enhanced QD binding to the capsid by nearly a factor of four compared to bacteriophage T7. Additionally, the characterization methodology presented can be applied to the quantitative characterization of other fluorescent nanocrystal‐biological conjugates. Biotechnol. Bioeng. 2009;104: 1059–1067. Published 2009 Wiley Periodicals, Inc.

Liposome-Templated Supramolecular Assembly of Responsive Alginate Nanogels

Nanosized gel particles (nanogels) are of interest for a variety of applications, including drug delivery and single-molecule encapsulation. Here, we employ the cores of nanoscale liposomes as reaction vessels to template the assembly of calcium alginate nanogels. For our experiments, a liposome formulation with a high bilayer melting temperature (Tm) is selected, and sodium alginate is encapsulated in the liposomal core. The liposomes are then placed in an aqueous buffer containing calcium chloride, and the temperature is raised up to Tm. This allows permeation of Ca2+ ions through the bilayer and into the core, whereupon these ions gel the encapsulated alginate. Subsequently, the lipid bilayer covering the gelled core is removed by the addition of a detergent. The resulting alginate nanogels have a size distribution consistent with that of the template liposomes (ca. 120-200 nm), as confirmed by transmission electron microscopy and light scattering. Nanogels of different average sizes can be synthesized by varying the template dimensions, and the gel size can be further tuned after synthesis by the addition of monovalent salt to the solution.

Water-soluble DNA-wrapped single-walled carbon-nanotube/quantum-dot complexes.

In recent years, carbon nanotubes (CNTs), especially singlewalled carbon nanotubes (SWCNTs), have attracted much attention due to their unique properties and potential towards broad real-world applications. The integration of SWCNTs with other unique nanoscale luminescent materials, such as quantum dots (QDs), has enabled the manufacture of many novel nanocomposite materials with enhanced structural, mechanical, optical, and chemical properties. The performance of these composite materials strongly depends upon the properties of the individual components and additives as well as the conjugation chemistry required to assemble them into composite hybrids. Therefore, a variety of new techniques have been developed to modify the optical, mechanical, chemical, and electrical properties of SWCNTs to control the properties of the final composite materials. Among the additives to SWCNT-based composites, novel nanoparticles (NPs) have been increasingly employed. Functionalized NPs can be designed to covalently bind to the functional groups expressed on the sidewalls or ends of

Characterization of Non-Equilibrium Nanoparticle Adsorption on a Model Biological Substrate

The kinetics of nanoparticle (NP) adsorption on a model biological interface (collagen) is measured in microfluidic channels using surface plasmon resonance (SPR) imaging over a range of CdSe/ZnS quantum dot concentrations to investigate the underlying binding process. Spherical CdSe/ZnS core-shell NP, derivatized with 3-mercaptopropionic acid (3-MPA), were considered to be model NPs because of their widespread use in biological applications and their relatively monodisperse size. The kinetic adsorption data suggests that the binding between the NP and the collagen substrate is irreversible at room temperature (pH approximately 7.4), and this type of adsorption process was further characterized in the context of a surface absorption model. Specifically, diffusion-limited adsorption was found to predominate the adsorption process at lower concentrations (<0.4 micromol/L), and NP adsorption was reaction-limited at higher concentration (>0.4 micromol/L). A limited pH study of our system indicates that NPs desorb from collagen under acidic conditions (pH 5.5); no significant desorption was observed under neutral and basic pH conditions. These observations are consistent with electrostatic interactions being the dominant force governing NP desorption from collagen substrates. Our present methodology for characterizing the seemingly irreversible NP adsorption complements our earlier study where NP adsorption onto weakly adsorbing surfaces (self-assembled monolayers) was characterized by Langmuir NP adsorption measurements.