Simona Argentiere

Versatile fabrication of vascularizable scaffolds for large tissue engineering in bioreactor

Despite significant progresses were achieved in tissue engineering over the last 20 years, a number of unsolved problems still remain. One of the most relevant issues is the lack of a proper vascularization that is limiting the size of the engineered tissues to smaller than clinically relevant dimensions. Sacrificial molding holds great promise to engineered construct with perfusable vascular architectures, but there is still the need to develop more versatile approaches able to be independent of the nature and dimensions of the construct. In this work we developed a versatile sacrificial molding technique for fabricating bulk, cell-laden and porous scaffolds with embedded vascular fluidic networks. These branched fluidic architectures are created by highly resistant thermoplastic sacrificial templates, made of poly(vinyl alcohol), representing a remarkable progress in manufacturability and scalability. The obtained architecture, when perfused in bioreactor, has shown to prevent the formation of a necrotic core in thick cell-laden constructs and enabled the rapid fabrication of hierarchically branched endothelium. In conclusion we demonstrate a novel strategy towards the engineering of vascularized thick tissues through the integration of the PVA-based microfabrication sacrificial approach and perfusion bioreactors. This approach may be able to scale current engineered tissues to clinically relevant dimensions, opening the way to their widespread clinical applications.

Poly(amido-amine)-based hydrogels with tailored mechanical properties and degradation rates for tissue engineering

Poly(amido-amine) (PAA) hydrogels containing the 2,2-bisacrylamidoacetic acid-4-amminobutyl guanidine monomeric unit have a known ability to enhance cellular adhesion by interacting with the arginin-glycin-aspartic acid (RGD)-binding αVβ3 integrin, expressed by a wide number of cell types. Scientific interest in this class of materials has traditionally been hampered by their poor mechanical properties and restricted range of degradation rate. Here we present the design of novel biocompatible, RGD-mimic PAA-based hydrogels with wide and tunable degradation rates as well as improved mechanical and biological properties for biomedical applications. This is achieved by radical polymerization of acrylamide-terminated PAA oligomers in both the presence and absence of 2-hydroxyethylmethacrylate. The degradation rate is found to be precisely tunable by adjusting the PAA oligomer molecular weight and acrylic co-monomer concentration in the starting reaction mixture. Cell adhesion and proliferation tests on Madin-Darby canine kidney epithelial cells show that PAA-based hydrogels have the capacity to promote cell adhesion up to 200% compared to the control. Mechanical tests show higher compressive strength of acrylic chain containing hydrogels compared to traditional PAA hydrogels.

Photocrosslinked poly(amidoamine) nanoparticles for central nervous system targeting

This study presents an innovative method for the synthesis of polymeric nanoparticles (NPs) for central nervous system (CNS) targeting. The method is based on Ultraviolet light (UV)-induced crosslinking of diacrylamide-terminated oligomers of poly(amidoamine)s (PAAs), a widely used class of synthetic polymers in biomedical field research, especially in drug delivery thanks to their excellent biocompatibility and controlled biodegradability. Previous attempts aiming at preparing PAA-based NPs by self-assembly were challenged by lack of structural stability and consequently their early degradation and premature drug release. Here, the UV-induced crosslinked PAA NPs demonstrated to overcome main disadvantages of the self-assembled ones, as they showed improved stability and controlled release properties. Besides the remarkable efficiency to produce monodisperse and stable PAA NPs, the UV-induced crosslinking method is featured by great versatility and low environmental impact, since it does not require use of organic solvents and multiple purification steps. The capability of PAA NPs to encapsulate a fluorescently labelled model protein was experimentally demonstrated in this study. Cell culture experiments showed that PAA NPs were biocompatible and highly permeable across an in vitro blood-brain barrier model, thus highlighting their great potential as drug delivery vectors for CNS delivery.

Poly(lactide-co-glycolide) nanoparticles embedded in a micropatterned collagen scaffold for neuronal tissue regeneration

ABSTRACT Micropatterned collagen scaffold with axially oriented pores embedded with poly(lactide-co-glycolide) nanoparticles (PLGA NPs) was synthesized and characterized. Two different concentrations of PLGA nanoparticles have been tested and the experimental results indicate that the concentration affects the release kinetic, whereas the stiffness, the crosslink density, and the degradation rate of the collagen matrix are comparable to bare scaffold. Further, the proposed crosslinking procedure provides a resistance to thermal and enzymatic degradation, thereby promoting the persistence of scaffold for a period of time compatible with nerve regeneration. GRAPHICAL ABSTRACT

Calcium Stearate as an Effective Alternative to Poly(vinyl alcohol) in Poly-Lactic-co-Glycolic Acid Nanoparticles Synthesis

Poly(d,l-lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) are among the most studied systems for drug and gene targeting. So far, the synthesis of stable and uniform PLGA NPs has involved the use of a large excess of polyvinyl surfactants such as poly(vinyl alcohol) (PVA) and polyvinylpyrrolidone (PVP), whose removal requires multistep purification procedures of high ecological and economic impact. Hence the development of environment-friendly and cost-effective synthetic procedures for the synthesis of PLGA NPs would effectively boost their use in clinics. This work aims to address this issue by investigating more efficacious alternatives to the so far employed polyvinyl surfactants. More specifically, we developed an innovative synthetic process to achieve stable and uniformly distributed PLGA NPs that involves the use of calcium stearate (CSt), gaining benefits of its high biocompatibility and efficacy at low concentrations and avoiding consequently expensive purification steps. With the help of minimum quantities of polysorbate 60 and sorbitane monostearate, CSt-stabilized PLGA NPs with different sizes and structures were synthesized. The influence of CSt on the encapsulation efficiency of bioactive molecules has been also investigated. The effective encapsulation of both hydrophobic (curcumin) and hydrophilic (fibrinogen labeled with Alexa647) biomolecules into NPs was demonstrated by confocal microscopy, and their release quantified by spectrofluorimetric analyses. Finally, degradation and cytotoxicity studies showed that CSt stabilized NPs were stable under physiological conditions and with good biocompatibility, thus looking promising for further investigation as controlled release devices.

Dose and batch-dependent hepatobiliary toxicity of 10 nm silver nanoparticles

Silver nanoparticles (AgNPs) are widely used because of their antimicrobial properties in medical devices and in a variety of consumer products. The extensive use of AgNPs raises concerns about their potential toxicity, although it is still difficult to draw definite conclusions about their toxicity based on published data. Our preliminary studies performed to compare the effect of the AgNPs size (10-40-100 nm) on toxicity, demonstrated that the smallest AgNPs determine the most severe toxicological effects. In order to best investigate the impact of physicochemical characteristics of 10 nm AgNPs on toxicity, we compare three different batches of 10 nm AgNPs slightly different in size distribution (Batch A: 8.8±1.7 nm; Batch B: 9.4±1.7 nm; Batch C: 10.0±1.8 nm). Mice were intravenously treated with two doses (5 and 10 mg/kg) of the 3 AgNPs. 24 hours after the treatment, mice were euthanized and underwent complete necropsy. Tissues were collected for histopathological examination and total silver content was determined in tissues by inductively coupled plasma mass spectrometry (ICP-MS). All batches induced severe hepatobiliary lesions, i.e. marked hepatocellular necrosis and massive hemorrhage of the gall bladder. The toxicity was dose-dependent and interestingly, the toxic effects were more severe in mice treated with batches A and B that contained smaller AgNPs. Since the total silver mass concentration was similar, the observed batch-dependent toxicity suggest that even subtle differences in size may contribute to relevant changes in the toxicological outcomes, confirming the fundamental involvement of physicochemical features with respect to toxicity.