Simone Guarnera

Lead-free organic–inorganic tin halide perovskites for photovoltaic applications

Already exhibiting solar to electrical power conversion efficiencies of over 17%, organic–inorganic lead halide perovskite solar cells are one of the most promising emerging contenders in the drive to provide a cheap and clean source of energy. One concern however, is the potential toxicology issue of lead, a key component in the archetypical material. The most likely substitute is tin, which like lead, is also a group 14 metal. While organic–inorganic tin halide perovskites have shown good semiconducting behaviour, the instability of tin in its 2+ oxidation state has thus far proved to be an overwhelming challenge. Here, we report the first completely lead-free, CH3NH3SnI3 perovskite solar cell processed on a mesoporous TiO2 scaffold, reaching efficiencies of over 6% under 1 sun illumination. Remarkably, we achieve open circuit voltages over 0.88 V from a material which has a 1.23 eV band gap.

Hyperbranched quasi-1D nanostructures for solid-state dye-sensitized solar cells.

In this work we demonstrate hyperbranched nanostructures, grown by pulsed laser deposition, composed of one-dimensional anatase single crystals assembled in arrays of high aspect ratio hierarchical mesostructures. The proposed growth mechanism relies on a two-step process: self-assembly from the gas phase of amorphous TiO2 clusters in a forest of tree-shaped hierarchical mesostructures with high aspect ratio; oriented crystallization of the branches upon thermal treatment. Structural and morphological characteristics can be optimized to achieve both high specific surface area for optimal dye uptake and broadband light scattering thanks to the microscopic feature size. Solid-state dye sensitized solar cells fabricated with arrays of hyperbranched TiO2 nanostructures on FTO-glass sensitized with D102 dye showed a significant 66% increase in efficiency with respect to a reference mesoporous photoanode and reached a maximum efficiency of 3.96% (among the highest reported for this system). This result was achieved mainly thanks to an increase in photogenerated current directly resulting from improved light harvesting efficiency of the hierarchical photoanode. The proposed photoanode overcomes typical limitations of 1D TiO2 nanostructures applied to ss-DSC and emerges as a promising foundation for next-generation high-efficiency solid-state devices comprosed of dyes, polymers, or quantum dots as sensitizers.

The effect of selective interactions at the interface of polymer–oxide hybrid solar cells

The working mechanisms of excitonic solar cells are strongly dominated by interface processes, which influence the final device efficiency. However, it is still very challenging to clearly track the effects of inter-molecular processes at a mesoscopic level. We report on the realization of polymer-based hybrid solar cells made of prototypical materials, namely, poly(3-hexylthiophene) (P3HT) finely infiltrated in a TiO2 scaffold, with power conversion efficiency exceeding 1%. A step-change improvement in the device performance is enabled by engineering the hybrid interface by the insertion of an appropriate molecular interlayer. An unprecedented set of characterization techniques, including time-resolved optical spectroscopy, X-ray photoemission spectroscopy, positron annihilation spectroscopy and atomistic simulations, allows us to rationalize our findings. We show that a suitable chemical structure of the interlayer molecule induces selective intermolecular interactions, and thus a preferential surface energetic landscape and morphological order at the interface which consequently drives a strong improvement in charge generation and a decrease in recombination losses.

Role of Hot Singlet Excited States in Charge Generation at the Black Dye/TiO2 Interface

Photoinduced electron transfer at low-band-gap ruthenium-based dye/TiO2 has been investigated by means of ultrafast transient absorption and DFT/TDDFT calculations. We demonstrate that although the charge generation mechanism is triplet mediated upon band gap excitation, as already proven in high band gap dyes such as the well-known N3 and N719, when excess energy is provided which allows to reach high energy singlet states still in the visible spectral range, ultrafast electron transfer takes place. No intersystem crossing process is observed and charge generation happens only from the singlet excited state.

Nanoscale analysis of a hierarchical hybrid solar cell in 3D

A quantitative method for the characterization of nanoscale 3D morphology is applied to the investigation of a hybrid solar cell based on a novel hierarchical nanostructured photoanode. A cross section of the solar cell device is prepared by focused ion beam milling in a micropillar geometry, which allows a detailed 3D reconstruction of the titania photoanode by electron tomography. It is found that the hierarchical titania nanostructure facilitates polymer infiltration, thus favoring intermixing of the two semiconducting phases, essential for charge separation. The 3D nanoparticle network is analyzed with tools from stochastic geometry to extract information related to the charge transport in the hierarchical solar cell. In particular, the experimental dataset allows direct visualization of the percolation pathways that contribute to the photocurrent.

Photoactive molecular junctions based on self-assembled monolayers of indoline dyes.

We demonstrate the feasibility of a photodetector based on an ensemble molecular junction, where a self-assembled monolayer of an organic donor-acceptor dye is directly sandwiched between two electrodes. In such a device, upon photoexcitation and generation of a charge-transfer state on the molecule, charges are dissociated and directly collected at the electrodes without the need of transport through a bulk phase, as in usual photodetectors. We show that the device can work in photovoltaic regime and the spectral response can be tuned by varying the light absorbing dye. Therefore, the electro-optical properties of the downscaled device can be unambiguously related to the physical-chemical properties of the molecules, a commonly difficult point to demonstrate in a molecular junction device, because of the uncertainties of the interplay between molecules and electrodes. The proposed device, which relies on a simple self-assembly process, has a strong potentiality for fast responding, downscaled detectors, ultimately limited by charge dissociation dynamics, and can be considered also as a useful tool to investigate fundamental electro-optical processes in molecular monolayers.

Photo-active integrated getters for stable dye-sensitized solar cells

Linde Type A with Na cation (LTA-Na) nanozeolite-based TiO2 photoanodes have been implemented in dye-sensitized solar cells introducing the concept of an integrated getter. These innovative structures improve the device stability thanks to their ability to neutralize the moisture effect, while also acting as active scattering centers.