Sirilak Sattayasamitsathit

Highly Efficient Catalytic Microengines: Template Electrosynthesis of Polyaniline/Platinum Microtubes

Highly efficient catalytic microtubular engines are synthesized rapidly and inexpensively using an electrochemical growth of bilayer polyaniline/platinum microtubes within the conically shaped pores of a polycarbonate template membrane. These mass-produced microtubular engines are only 8 μm long, are self-propelled at an ultrafast speed (of over 350 body lengths s(-1)), and can operate in very low levels of the hydrogen peroxide fuel (down to 0.2%). The propulsion characteristics and optimization of these microtubular engines are described, along with their efficient operation in different biological environments which holds great promise for biomedical applications.

Superhydrophobic Alkanethiol-Coated Microsubmarines for Effective Removal of Oil

We demonstrate the use of artificial nanomachines for effective interaction, capture, transport, and removal of oil droplets. The simple nanomachine-enabled oil collection method is based on modifying microtube engines with a superhydrophobic layer able to adsorb oil by means of its strong adhesion to a long chain of self-assembled monolayers (SAMs) of alkanethiols created on the rough gold outer surface of the device. The resultant SAM-coated Au/Ni/PEDOT/Pt microsubmarine displays continuous interaction with large oil droplets and is capable of loading and transporting multiple small oil droplets. The influence of the alkanethiol chain length, polarity, and head functional group and hence of the surface hydrophobicity upon the oil-nanomotor interaction and the propulsion is examined. No such oil-motor interactions were observed in control experiments involving both unmodified microengines and microengines coated with SAM layers containing a polar terminal group. These results demonstrate that such SAM-Au/Ni/PEDOT/Pt micromachines can be useful for a facile, rapid, and efficient collection of oils in water samples, which can be potentially exploited for other water-oil separation systems. The integration of oil-sorption properties into self-propelled microengines holds great promise for the remediation of oil-contaminated water samples and for the isolation of other hydrophobic targets, such as drugs.

Bacterial Isolation by Lectin-Modified Microengines

New template-based self-propelled gold/nickel/polyaniline/platinum (Au/Ni/PANI/Pt) microtubular engines, functionalized with the Concanavalin A (ConA) lectin bioreceptor, are shown to be extremely useful for the rapid, real-time isolation of Escherichia coli (E. coli) bacteria from fuel-enhanced environmental, food, and clinical samples. These multifunctional microtube engines combine the selective capture of E. coli with the uptake of polymeric drug-carrier particles to provide an attractive motion-based theranostics strategy. Triggered release of the captured bacteria is demonstrated by movement through a low-pH glycine-based dissociation solution. The smaller size of the new polymer-metal microengines offers convenient, direct, and label-free optical visualization of the captured bacteria and discrimination against nontarget cells.

Chemical sensing based on catalytic nanomotors: motion-based detection of trace silver.

A motion-based chemical sensing involving fuel-driven nanomotors is demonstrated. The new protocol relies on the use of an optical microscope for tracking changes in the speed of nanowire motors in the presence of the target analyte. Selective and sensitive measurements of trace silver ions are illustrated based on the dramatic and specific acceleration of bimetal nanowire motors in the presence of silver. Such nanomotor-based measurements would lead to a wide range of novel and powerful chemical and biological sensing protocols.

Micromotor‐Based High‐Yielding Fast Oxidative Detoxification of Chemical Threats

Rapid field conversion of chemical weapons into non-toxic products is one of the most challenging tasks in weapons of mass destruction (WMD) science. This is particularly the case for eliminating stockpiles of chemical warfare agents (CWAs) in remote storage field locations, where the use of large quantities of decontaminating reagents, long reaction times, and controlled mechanical agitation is impossible or undesired. New efficient “clean” technologies and (bio)chemical processes are thus sought for detoxifying stored agents, counteracting nerve-agent attacks, and decommissioning chemical weapons. Environmentally friendly solutions of hydrogen peroxide, combined with suitable activators (e.g., bicarbonate), have been shown to be extremely useful for decontaminating a broad spectrum of CWAs to yield nontoxic products. These peroxide-based systems, which rely on the in situ generation of OOH nucleophiles, have recently replaced chlorine-based bleaching processes, which produce undesirable products, and have thus led to effective decontamination of the chemical agents GB (Sarin, isopropyl methylphosphonofluoridate), VX ((S)-[2-(diisopropylamino)ethyl] O-ethyl methylphosphonothioate), GD (Soman, pinacolyl methylphosphonofluoridate), and HD (sulfur mustard). Yet, such an oxidative treatment commonly requires high peroxide concentrations (20–30%; approaching a stoichiometry of 1:50), along with prolonged operation and/or mechanical agitation. Such reaction conditions are not suitable or not desired for eliminating stockpiles of CWAs in remote field settings or hostile storage locations, as large quantities of the reagents may not be transportable on military aircrafts and require special packaging and handling. The efficient elimination of chemical-weapon stockpiles in field locations thus remains a major challenge to the chemistry and defense communities. Herein, we describe a powerful strategy that is based on self-propelled micromotors, for a high-yielding accelerated oxidative decontamination of chemical threats using low peroxide levels and no external agitation. Functionalized synthetic micromotors have recently demonstrated remarkable capabilities in terms of isolation and transport for diverse biomedical and environmental applications, but not in connection to increasing the yield and speed of chemical reactions. The new motor-based method relies on the use of peroxide-driven microtubular engines for the efficient selfmixing of a remediation solution, which dramatically accelerates the decontamination process. Fluid mixing is extremely important for enhancing the yield and speed of a wide range of chemical processes, including decontamination reactions, where quiescent conditions lead to low reaction efficiency and long operations. The observed mixing, which is induced by the peroxide-driven micromotor, is analogous to that reported for the motility of E. coli bacteria, where a large-scale collective motion has been shown to enhance diffusion processes. Enhanced diffusion of passive tracers has also been observed in the presence of catalytic nanowire motors. Although the new micromotor strategy presented herein was applied to the accelerated, high-yielding, and simplified decontamination of organophosphate (OP) nerve agents, the concept could have broad implications for enhancing the efficiency and speed of a wide range of chemical processes in the absence of external agitation. The concept of the micromotor/peroxide-based decontamination of chemical threats is illustrated in Figure 1. This new strategy relies on micromotors without mechanical stirring (Figure 1A). A known number of micromotors were placed in a nerve-agent-contaminated solution, along with hydrogen peroxide (used as the oxidizing agent as well as the micromotor fuel), the peroxide activator (NaHCO3 or NaOH), and the surfactant sodium cholate (NaCh), which was essential for bubble generation. The oxidative conversion of the OP nerve agent into para-nitrophenol (p-NP) was achieved under mild quiescent conditions that involve the in situ generation of OOH nucleophiles with no external stirring (Figure 1B). The decrease in concentration of the OP [*] Dr. J. Orozco, G. Cheng, D. Vilela, Dr. S. Sattayasamitsathit, Prof. R. Vazquez-Duhalt, Dr. G. Vald s-Ram rez, Dr. O. S. Pak, Prof. J. Wang Departments of Nanoengineering and Mechanical Engineering University of California San Diego La Jolla, CA 92093 (USA) E-mail: josephwang@ucsd.edu G. Cheng, Prof. C. Kan Tsinghua University, Beijing, 100084 (China) D. Vilela, Prof. A. Escarpa University of Alcal 28871 Alcal de Henares (Spain)

Catalytically propelled micro-/nanomotors: how fast can they move?

Synthetic micro-/nanomotors represent one of the most exciting challenges facing nanotechnology and hold considerable promise for diverse future applications. This review discusses different strategies to improve the speed of the catalytic nanomotors, summarizing and comparing the maximum absolute and relative speeds obtained with different catalytically propelled micro-/nanomotors. Remarkably ultrafast nanowires and microtube engines, with speeds of 60 and 375 body lengths s(-1), respectively, have been developed recently. Achieving such amazingly high speed and power has been accomplished through rational optimization of key factors governing the propulsion behavior, including composition of the motor and fuel, the motor morphology and various external stimuli. We hope that our discussion will serve as a guide to the rational design of even faster and more powerful catalytically propelled fuel-efficient micro-/nanomotors, with speed limits that are limited only by our imagination.

Ultrasound-Propelled Nanoporous Gold Wire for Efficient Drug Loading and Release

Ultrasound (US)-powered nanowire motors based on nanoporous gold segment are developed for increasing the drug loading capacity. The new highly porous nanomotors are characterized with a tunable pore size, high surface area, and high capacity for the drug payload. These nanowire motors are prepared by template membrane deposition of a silver-gold alloy segment followed by dealloying the silver component. The drug doxorubicin (DOX) is loaded within the nanopores via electrostatic interactions with an anionic polymeric coating. The nanoporous gold structure also facilitates the near-infrared (NIR) light controlled release of the drug through photothermal effects. Ultrasound-driven transport of the loaded drug toward cancer cells followed by NIR-light triggered release is illustrated. The incorporation of the nanoporous gold segment leads to a nearly 20-fold increase in the active surface area compared to common gold nanowire motors. It is envisioned that such US-powered nanomotors could provide a new approach to rapidly and efficiently deliver large therapeutic payloads in a target-specific manner.

Highly ordered multilayered 3D graphene decorated with metal nanoparticles

Highly ordered multi-layered three-dimensional (3D) graphene structures decorated with Pd, Pt and Au metal nanoparticles are prepared and characterized. The ability to control the morphology, distribution and size of the metal nanoparticles on the 3D graphene support upon changing the electro- and electroless-deposition conditions is demonstrated. Tailor-made Pt nanostructures, with nanospike and nanoparticle shapes, are prepared using electroless deposition techniques. Au nanoflowers and nanoparticle structures and Pd nanocubes are obtained following electrodeposition onto the 3D graphene support. The deposition patterns and trends are characterized. The greatly enhanced electrocatalytic activity of the metal-NP–graphene surfaces has been illustrated in connection to voltammetric measurements of ORR and hydrogen peroxide at 3D-graphene coated with Pt and Pd nanoparticles, respectively. Such metal nanoparticles decorated multi-layer 3D graphene allows for high mass transport access and catalytic activity for a diverse range of applications, including sensor and fuel-cell technologies.

Hybrid Nanomotor: A Catalytically/Magnetically Powered Adaptive Nanowire Swimmer

A synthetic hybrid nanomotor, which combines chemically powered propulsion and magnetically driven locomotion, is described. The new catalytic-magnetic nanomotor consists of a flexible multisegment Pt-Au-Ag(flex)-Ni nanowire, with the Pt-Au and Au-Ag(flex)-Ni portions responsible for the catalytic and magnetic propulsion modes, respectively. The experimental data and theoretical considerations indicate that the hybrid design only minimally compromises the individual propulsion modes. Rapid and convenient switching from the catalytic to the magnetic mode is illustrated. The resulting catalytic-magnetic adaptive nanomotor can address the fuel depletion and salt limitation common to chemically powered motors by switching to magnetic propulsion. Reversal of the motion direction is also achieved upon applying the magnetic field. Such use of two sources to power a hybrid device offers a broader scope of operation and holds considerable promise for designing adaptive nanovehicles that reconfigure their operation in response to environmental changes or unexpected events.

Bubble-Propelled Micromotors for Enhanced Transport of Passive Tracers

Fluid convection and mixing induced by bubble-propelled tubular microengines are characterized using passive microsphere tracers. Enhanced transport of the passive tracers by bubble-propelled micromotors, indicated by their mean squared displacement (MSD), is dramatically larger than that observed in the presence of catalytic nanowires and Janus particle motors. Bubble generation is shown to play a dominant role in the effective fluid transport observed in the presence of tubular microengines. These findings further support the potential of using bubble-propelled microengines for mixing reagents and accelerating reaction rates. The study offers useful insights toward understanding the role of the motion of multiple micromotors, bubble generation, and additional factors (e.g., motor density and fuel concentration) upon the observed motor-induced fluid transport.