Sławomir Kozaczka

Processing data on sea bottom structure obtained by means of the parametric sounding

ABSTRACT The aim of the paper is to analyze data obtained during sounding the Gdansk Bay sea bed by means of the parametric echo-sounder. The accuracy of the sea bottom structure investigation needs correct configuration of research equipment and proper calibration of peripheral devices (GPS, heading sensor, MRU-Z motion sensor and navigation instruments which provide necessary data to bathymetrical measurement system, enabling its work with full capability. The parametric sub-bottom profiler delivers two types of data which include different information: envelope and pure echo signal sampled without processing. The first is used to present echograms in real time and the second one is stored during sounding and the obtained data can be analyzed by using post-processing software. Differences in the results are presented and discussed. And, are described also criteria taken into account during determination of the measurement areas and selection of different configurations of the software according to the information to be obtained from trials. Complementary information can be achieved from processing the data by means of the procedures offered by Matlab software, which allows for a clear 3D presentation of the results. The consideration are illustrated by echograms taken in the natural conditions

Gdansk Bay sea bed sounding and classification of its results

Abstract The main goal of this paper is to describe the results of sounding the Gdansk Bay sea bed by using a SES- 2000 Standard parametric sub-bottom profiler. Quality of data obtained during trials depends inter alia on a proper location of transducer array to reduce influence of pitch, roll and heave motions as well as ship self noise (resulting from bubbles due to propeller and flow around hull, vibration generated by main engine and auxiliary devices). Furthermore, calibration of complementary units such as GPS, heading sensor, MRU-Z motion sensor and navigation devices make sea-bed investigating system capable of working with its whole capability. Results of so prepared surveys have been presented and discussed. They contain also an elaborated map of Gdansk Bay with preliminarily classified sea-bed materials and description of most interesting areas.

Laboratory investigation with subbottom parametric echosounder SES-2000 standard with an emphasis on reflected pure signals analysis

The main goal of the paper is to describe correlations between measurements results of trials taken on Guls of Gdansk bottom sounded with parametric echosounder SES-2000 Standard and laboratory research where collected during survey sediments were measured. Stationary tests took place at Gdansk University of Technology where 30 meters long 1.8 meter deep and 3 meters wide water tank is located. Main lobe of antenna was directed parallel to the longest dimension. Hydrophones used during experiment were fixed to the 3D positioning system—ISEL, which gave the opportunity to place sensor with high precision in the middle of main lobe or other specified places. Using prepared to this experiment frames different sea bottom layers configurations corresponding to the natural structure were sounded. Data obtained during laboratory measurements and trials in situ were combined to draw conclusions about proper interpretation of echograms and begin the process of sediments classification. Analyses were done with Matl...