Sonya Piskounova

Injectable cell-free template for bone-tissue formation

Here we present a novel injectable hydrogel which forms a template for de novo formation of bone tissue. Hydrogel formation takes place in situ in less than 1 min by the cross-linking of multifunctional hyaluronic acid and polyvinyl alcohol derivatives. Endogenous cells are recruited in vivo by incorporating bone morphogenetic protein-2 (BMP-2), a powerful promoter for osteogenic differentiation. The hydrogel was evaluated in vitro by performing a cell viability test and a release study and in vivo by a rat ectopic model. Examination by X-ray, microcomputed tomography, and histology revealed a significant bone formation at the target site for gels containing BMP-2, and a complete degradation was observed for gels without BMP-2 four weeks after injection. There were no signs of inflammation or foreign body response in either group and we believe that this system has the potential as an off-the-shelf injectable to be used where bone tissue is needed.

Functionalization of Hyaluronic Acid with Chemoselective Groups via a Disulfide-Based Protection Strategy for In Situ Formation of Mechanically Stable Hydrogels

Functionalization of hyaluronic acid (HA) with chemoselective groups enables in situ (in vivo) formation of HA-based materials in minimally invasive injectable manner. Current methods of HA modification with such groups primarily rely on the use of a large excess of a reagent to introduce a unique reactive handle into HA and, therefore, are difficult to control. We have developed the new protective group strategy based on initial mild cleavage of a disulfide bond followed by elimination of the generated 2-thioethoxycarbonyl moiety ultimately affording free amine-type functionality, such as hydrazide, aminooxy, and carbazate. Specifically, new modifying homobifunctional reagents have been synthesized that contain a new divalent disulfide-based protecting group. Amidation of HA with these reagents gives rise to either one-end coupling product or to intra/intermolecular cross-linking of the HA chains. However, after subsequent treatment of the amidation reaction mixture with dithiothreitol (DTT), these cross-linkages are cleaved, ultimately exposing free amine-type groups. The same methodology was applied to graft serine residues to the HA backbone, which were subsequently oxidized into aldehyde groups. The strategy therefore encompasses a new approach for mild and highly controlled functionalization of HA with both nucleophilic and electrophilic chemoselective functionalities with the emphasis for the subsequent conjugation and in situ cross-linking. A series of new hydrogel materials were prepared by mixing the new HA-aldehyde derivative with different HA-nucleophile counterparts. Rheological properties of the formed hydrogels were determined and related to the structural characteristics of the gel networks. Human dermal fibroblasts remained viable while cultured with the hydrogels for 3 days, with no sign of cytotoxicity, suggesting that the gels described in this study are candidates for use as growth factors delivery vehicles for tissue engineering applications.

In vitro characterization of bioactive titanium dioxide/hydroxyapatite surfaces functionalized with BMP-2

Poor implant fixation and bone resorption are two of the major challenges in modern orthopedics and are caused by poor bone/implant integration. In this work, bioactive crystalline titanium dioxide (TiO(2))/hydroxyapatite (HA) surfaces, functionalized with bone morphogenetic protein 2 (BMP-2), were evaluated as potential implant coatings for improved osseointegration. The outer layer consisted of HA, which is known to be osteoconductive, and may promote improved initial bone attachment when functionalized with active molecules such as BMP-2 in a soaking process. The inner layer of crystalline TiO(2) is bioactive and ensures long-term fixation of the implant, once the hydroxyapatite has been resorbed. The in vitro response of mesenchymal stem cells on bioactive crystalline TiO(2)/HA surfaces functionalized with BMP-2 was examined and compared with the cell behavior on nonfunctionalized HA layers, crystalline TiO(2) surfaces, and native titanium oxide surfaces. The crystalline TiO(2) and the HA surfaces showed to be more favorable than the native titanium oxide surface in terms of cell viability and cell morphology as well as initial cell differentiation. Furthermore, cell differentiation on BMP-2-functionalized HA surfaces was found to be significantly higher than on the other surfaces indicating that the simple soaking process can be used for incorporating active molecules, promoting fast bone osseointegration to HA layers.

Characterization of recombinant human bone morphogenetic protein-2 delivery from injectable hyaluronan-based hydrogels by means of 125I-radiolabelling.

This study presents a thorough in vitro and in vivo characterization of the delivery of bone morphogenetic protein 2 (BMP‐2) from a hyaluronan‐based hydrogel system. The in vitro release of BMP‐2 from similar hydrogels has previously been studied by enzyme‐linked immunosorbent assay (ELISA), by which only a fraction of the loaded protein is detected. In the current study, 125I radiolabelling was used instead to monitor BMP‐2 in vitro and in vivo. To minimize protein loss during handling, 125I‐BMP‐2 adsorption to different tubes was studied at different times and temperatures. The data showed that Protein LoBind tubes exhibited the lowest protein affinity. Furthermore, a biphasic release profile of biologically active BMP‐2 was observed both in vitro and in vivo, with the initial fast phase during the first week, followed by a slower release during the remaining 3 weeks. The initial fast‐release phase corresponded to the early bone formation observed after 8 days in an ectopic model in rats. Bone volume and mineral content increased until day 14, after which a decrease in bone volume was observed, possibly due to resorption in response to decreased amounts of released BMP‐2. Overall, the results suggested that cautious protein handling and a reliable quantification technique are essential factors for successful design of a BMP‐2 delivery system. Copyright

The importance of proper protein handling and detection for the design of a BMP-2 release system

Adequate cellular in-growth into biomaterials is one of the fundamental requirements in regenerative medicine. Type-I-collagen is the most commonly used material for soft tissue engineering, because it is nonimmunogenic and a highly porous network for cellular support. However, adequate cell in-growth and cell seeding has been suboptimal. Different densities of collagen scaffolds (0.3% to 0.8% (w/v)) with/without polymer knitting (poly-caprolactone (PCL)) were prepared. The structure of collagen scaffolds was characterized using scanning electronic microscopy (SEM) and HE staining. The mechanical strength of hybrid scaffolds was determined using tensile strength analysis. Cellular penetration and interconnectivity were evaluated using fluorescent bead distribution and human bladder smooth muscle cells and urothelium seeding. SEM and HE analysis showed the honeycomb structure and the hybrid scaffolds were adequately connected. The hybrid scaffolds were much stronger than collagen alone. The distribution of the beads and cells were highly dependent on the collagen density: at lower densities the beads and cells were more evenly distributed and penetrated deeper into the scaffold. The lower density collagen scaffolds showed remarkably deeper cellular penetration and by combining it with PCL knitting the tensile strength was enhanced. This study indicated that a 0.4% hybrid scaffold strengthened with knitting achieved the best cellular distribution.Human adult heart harbors a population of resident progenitor cells that can be isolated by Sca-1 antibody and expanded in culture. These cells can differentiate into cardiomyocytes and vascular cells in vitro and contribute to cardiac regeneration in vivo. However, when directly injected as single cell suspension, the survival rate and retention is really poor, less than 1% of injected cells being detectable in the hosttissue within few weeks. The present study aimed at investigating the possibility to produce scaffoldless, thick cardiac progenitor cell-derived cardiac patches by thermo-responsive technology. Human cardiac progenitors obtained from the auricles of patients were cultured as scaffoldless engineered tissues fabricated using temperature-responsive surfaces obtained by poly-N-isopropylacrylamide (PNIPAAm) surface immobilization. In the engineered tissue, progenitor cells established proper three-dimensional intercellular relationships and produced abundant extracellular matrix, while preserving their phenotype and plasticity. Cell phenotype and viability within the 3D construct were followed for 1 week, showing that no significant differentiation or apoptotic events occurred within the construct. After engineered tissues were leant on visceral pericardium, a number of cells migrated into the myocardium and in the vascular walls, where they integrated in the respective textures. The study demonstrates the suitability of such approach to deliver stem cells.Spinal cord injury and repair is one of the important focus areas in tissue regeneration. Mechanical trauma caused due to factors such as contusion, compression or involuntary stretching induce post-traumatic secondary tissue damage in many Spinal Cord Injury (SCI) patients. Therefore, there is a need for scaffolds that provide a conducive threedimensionsal (3D) environment for injured cells to attach and grow. In this study we propose to synthesize 3D polymeric scaffolds in order to study the mechanical and adhesive properties & the nature of the interactions between hyaluronan-based (HY) biomaterials and cells and tissues both in vitroandin vivo. Here we have synthesized 3D HY-based hydrogels with robust mechanical and adhesive properties and demonstrate the use of this material for neuronal-related applications such as the treatment of SCI. Cell culture and survivability studies were done with NSC-34 cells. Live/Dead assay performed on the cells revealed significant differences in the staining of live cells and showed increased viability and proliferation. The number of live cells in the HY-based hydrogels with 0.1% collagen showed higher cell numbers compared with the other hydrogels. In this study we show that Injectable HYbased hydrogels with high elasticity, comparable to the mechanical properties of nervous tissue have been used in this study to study their biocompatibility and neuroprotective properties and they show better affinity for neuronal cells.Calcium phosphates (CaP) obtained by biomineralisation in Simulated Boby Fluid have been used for decades to assess the mineralisation capability of biomaterials. Recently, they have been envisioned as potential agents to promote bone formation. In this study, we have fabricated and coated with calcium phosphate melt electrospun scaffolds whereby macropores permit adequate cell migration and nutrient transfer. We have systematically investigated the effect of coating and osteoinduction onto the response of ovine osteoblasts and we observed that the coating up-regulated alkaline phosphatase activity regardless of the in vitro culture conditions. Micro Computed Tomography revealed that only scaffolds cultured in an osteoinductive cocktail were capable of depositing mineralised matrix, and that CaP coated scaffolds were more efficient at promoting mineralisation. Theses scaffolds were subcutaneously implanted in athymic rats and this demonstrated that the osteoinduction was a pre-requisite for bone formation in this ectopic model. It showed that although the bone formation was not significantly different after 8 weeks, the CaP coated scaffolds were superior at inducing bone formation as evidenced by higher levels of mineralisation at earlier time points. This work demonstrated that CaP coating is not sufficient to induce bone formation; however the combination of osteoinduction and CaP coating resulted in earlier bone formation in an ectopic model.Introduction: Bladder regeneration using minced bladder mucosa is an alternative to costly and time-consuming conventional in vitro culturing of urothelial cells. In this method, the uroepithelium ...