Tim Bowden

Enhanced neuronal differentiation in a three-dimensional collagen-hyaluronan matrix

Efficient 3D cell systems for neuronal induction are needed for future use in tissue regeneration. In this study, we have characterized the ability of neural stem/progenitor cells (NS/PC) to survive, proliferate, and differentiate in a collagen type I‐hyaluronan scaffold. Embryonic, postnatal, and adult NS/PC were seeded in the present 3D scaffold and cultured in medium containing epidermal growth factor and fibroblast growth factor‐2, a condition that stimulates NS/PC proliferation. Progenitor cells from the embryonic brain had the highest proliferation rate, and adult cells the lowest, indicating a difference in mitogenic responsiveness. NS/PC from postnatal stages down‐regulated nestin expression more rapidly than both embryonic and adult NS/PC, indicating a faster differentiation process. After 6 days of differentiation in the 3D scaffold, NS/PC from the postnatal brain had generated up to 70% neurons, compared with 14% in 2D. NS/PC from other ages gave rise to approximately the same proportion of neurons in 3D as in 2D (9–26% depending on the source for NS/PC). In the postnatal NS/PC cultures, the majority of βIII‐tubulin‐positive cells expressed glutamate, γ‐aminobutyric acid, and synapsin I after 11 days of differentiation, indicating differentiation to mature neurons. Here we report that postnatal NS/PC survive, proliferate, and efficiently form synapsin I‐positive neurons in a biocompatible hydrogel.

Injectable cell-free template for bone-tissue formation

Here we present a novel injectable hydrogel which forms a template for de novo formation of bone tissue. Hydrogel formation takes place in situ in less than 1 min by the cross-linking of multifunctional hyaluronic acid and polyvinyl alcohol derivatives. Endogenous cells are recruited in vivo by incorporating bone morphogenetic protein-2 (BMP-2), a powerful promoter for osteogenic differentiation. The hydrogel was evaluated in vitro by performing a cell viability test and a release study and in vivo by a rat ectopic model. Examination by X-ray, microcomputed tomography, and histology revealed a significant bone formation at the target site for gels containing BMP-2, and a complete degradation was observed for gels without BMP-2 four weeks after injection. There were no signs of inflammation or foreign body response in either group and we believe that this system has the potential as an off-the-shelf injectable to be used where bone tissue is needed.

Survey and qualification of internal standards for quantification by 1H NMR spectroscopy

In quantitative NMR (qNMR) selection of an appropriate internal standard proves to be crucial. In this study, 25 candidate compounds considered to be potent internal standards were investigated with respect to the ability of providing unique signal chemical shifts, purity, solubility, and ease of use. The (1)H chemical shift (delta) values, assignments, multiplicities and number of protons (for each signal), appropriateness (as to be used as internal standards) in four different deuterated solvents (D(2)O, DMSO-d(6), CD(3)OD, CDCl(3)) were studied. Taking into account the properties of these 25 internal standards, the most versatile eight compounds (2,4,6-triiodophenol, 1,3,5-trichloro-2-nitrobenzene, 3,4,5-trichloropyridine, dimethyl terephthalate, 1,4-dinitrobenzene, 2,3,5-triiodobenzoic acid, maleic acid and fumaric acid) were qualified using both differential scanning calorimetry (DSC) and NMR spectroscopy employing highly pure acetanilide as the reference standard. The data from these two methods were compared as well as utilized in the quality assessment of the compounds as internal standards. Finally, the selected internal standards were tested and evaluated in a real case of quantitative NMR analysis of a paracetamol pharmaceutical product.

Bone morphogenetic protein-2 delivered by hyaluronan-based hydrogel induces massive bone formation and healing of cranial defects in minipigs.

BACKGROUND Reconstruction of large craniofacial bone defects is a challenge using bone transplants or alloplastic materials. The use of bone morphogenetic protein (BMP)-2 together with a suitable carrier is an attractive option that may facilitate new bone formation. The authors have developed a hydrogel that is formed in situ by the cross-linking of multifunctional hyaluronic acid and polyvinyl alcohol derivatives mixed with hydroxyapatite nanoparticles, in the presence of BMP-2. The aim of this study was to evaluate the suitability of the hydrogel as a carrier for BMP-2 in repairing critical size cranial defects in a minipig model. METHODS Cranial defects (2 x 4 cm) were created in 14 minipigs. The experimental groups were as follows: group 1, craniotomy and application of 5 ml of hydrogel with 1.25 mg of BMP-2 (n = 6); group 2, craniotomy and application of 5 ml of hydrogel without BMP-2 (n = 6); and group 3, craniotomy with no further treatment (n = 2). RESULTS After 3 months, computed tomographic and histologic examinations were performed. There was spontaneous ossification in the untreated group, but the healing was incomplete. The hydrogel alone demonstrated no further effects. The addition of 1.25 mg of BMP-2 to the hydrogel induced a greater than 100 percent increase in bone volume (p = 0.003) and complete healing of the defects. Histologic examination revealed compact lamellar bone in the BMP group without intertrabecular fibrous tissue, as was seen in the other groups. The hydrogel was resorbed completely within 3 months and, importantly, caused no inflammatory reaction. CONCLUSION The injectable hydrogel may be favorable as a BMP-2 carrier for bone reconstruction.

Biocompatible and biodegradable phosphorylcholine ionomers with reduced protein adsorption and cell adhesion.

In this paper a recently developed biodegradable phosphorylcholine ionomer (PC ionomer) was evaluated in different biological environments with a focus on the adsorption of proteins (fibrinogen) and the adhesion of cells. Our results have shown that the polar phosphoryl choline (PC) group may be enriched at the surface of cast films with an added hydrophilic environment. X-ray photoelectron spectroscopy confirmed the surface depletion of PC groups in dry conditions, as nitrogen and phosphorous atoms were found in the bulk of the material but not at the outermost surface layer. The surface enrichment leads to a strongly hydrophilic surface that prevents the adsorption of proteins and reduces the adhesion of cells. The non-functional and hydrophobic reference poly(trimethylene carbonate) (PTMC) adsorbs both proteins and cells, thus the wetting and low adhesion behavior of the PC ionomer can be attributed to the introduced PC functionality. Since the in vivo acceptance of biomaterials is determined by their ability to withstand protein adsorption the PC ionomer described in this paper is highly interesting for a number of in vivo applications in which the adsorption of proteins may be critical, for example, blood contact events.

Diversity in cyclic carbonates: synthesis of triazole-functional monomers using click chemistry

Triazole-functional cyclic carbonates are presented as a new class of functional monomers for ring-opening polymerisation. Starting from bromo-functional six-membered cyclic carbonates, a series of triazole-functional monomers was synthesised using click chemistry. This synthetic strategy allows for facile synthesis of a great number of structurally diverse monomers from just a few azide-functional precursors.

Low Charge Density Cationic Polymers for Gene Delivery: Exploring the Influence of Structural Elements on in vitro Transfection

A series of end-functionalized poly(trimethylene carbonate) DNA carriers, characterized by low cationic charge density and pronounced hydrophobicity, is used to study structural effects on in vitro gene delivery. As the DNA-binding moieties are identical in all polymer structures, the differences observed between the different polymers are directly related to the functionality and length of the polymer backbone. The transfection efficiency and cytotoxicity of the polymer/DNA complexes are thus found to be dependent on a combination of polymer charge density and functionality, highlighting the importance of such structural considerations in the development of materials for efficient gene delivery.

Efficient DNA binding and condensation using low molecular weight, low charge density cationic polymer amphiphiles.

A new class of biodegradable cationic macromolecules for DNA binding and condensation was developed by end-group-functionalization of poly(trimethylene carbonate). A series of one- and two-armed structures was synthesized and their interaction with DNA was evaluated. To aid data interpretation, a non-linear modeling method was applied to show efficient DNA binding that was intimately related to cationic charge density and macromolecular architecture. One-armed, low charge density structures were consistently found to bind to DNA at lower charge ratios than their two-armed, high charge density counterparts. This suggests that polymer backbone structure and characteristics are important considerations in the development of efficient cationic polymer systems for DNA condensation and delivery.

Characterization of recombinant human bone morphogenetic protein-2 delivery from injectable hyaluronan-based hydrogels by means of 125I-radiolabelling.

This study presents a thorough in vitro and in vivo characterization of the delivery of bone morphogenetic protein 2 (BMP‐2) from a hyaluronan‐based hydrogel system. The in vitro release of BMP‐2 from similar hydrogels has previously been studied by enzyme‐linked immunosorbent assay (ELISA), by which only a fraction of the loaded protein is detected. In the current study, 125I radiolabelling was used instead to monitor BMP‐2 in vitro and in vivo. To minimize protein loss during handling, 125I‐BMP‐2 adsorption to different tubes was studied at different times and temperatures. The data showed that Protein LoBind tubes exhibited the lowest protein affinity. Furthermore, a biphasic release profile of biologically active BMP‐2 was observed both in vitro and in vivo, with the initial fast phase during the first week, followed by a slower release during the remaining 3 weeks. The initial fast‐release phase corresponded to the early bone formation observed after 8 days in an ectopic model in rats. Bone volume and mineral content increased until day 14, after which a decrease in bone volume was observed, possibly due to resorption in response to decreased amounts of released BMP‐2. Overall, the results suggested that cautious protein handling and a reliable quantification technique are essential factors for successful design of a BMP‐2 delivery system. Copyright

A Robust, Water‐Based, Functional Binder Framework for High‐Energy Lithium–Sulfur Batteries

We report here a water-based functional binder framework for the lithium-sulfur battery systems, based on the general combination of a polyether and an amide-containing polymer. These binders are applied to positive electrodes optimised towards high-energy electrochemical performance based only on commercially available materials. Electrodes with up to 4 mAh cm-2 capacity and 97-98 % coulombic efficiency are achievable in electrodes with a 65 % total sulfur content and a poly(ethylene oxide):poly(vinylpyrrolidone) (PEO:PVP) binder system. Exchange of either binder component for a different polymer with similar functionality preserves the high capacity and coulombic efficiency. The improvement in coulombic efficiency from the inclusion of the coordinating amide group was also observed in electrodes where pyrrolidone moieties were covalently grafted to the carbon black, indicating the role of this functionality in facilitating polysulfide adsorption to the electrode surface. The mechanical properties of the electrodes appear not to significantly influence sulfur utilisation or coulombic efficiency in the short term but rather determine retention of these properties over extended cycling. These results demonstrate the robustness of this very straightforward approach, as well as the considerable scope for designing binder materials with targeted properties.