Spencer D. Dreher

Palladium-Catalyzed, Direct Boronic Acid Synthesis from Aryl Chlorides: A Simplified Route to Diverse Boronate Ester Derivatives

Although much current research focuses on developing new boron reagents and identifying robust catalytic systems for the cross-coupling of these reagents, the fundamental preparations of the nucleophilic partners (i.e., boronic acids and derivatives) has been studied to a lesser extent. Most current methods to access boronic acids are indirect and require harsh conditions or expensive reagents. A simple and efficient palladium-catalyzed, direct synthesis of arylboronic acids from the corresponding aryl chlorides using an underutilized reagent, tetrahydroxydiboron B(2)(OH)(4), is reported. To ensure preservation of the carbon-boron bond, the boronic acids were efficiently converted to the trifluoroborate derivatives in good to excellent yields without the use of a workup or isolation. Further, the intermediate boronic acids can be easily converted to a wide range of useful boronates. Finally, a two-step, one-pot method was developed to couple two aryl chlorides efficiently in a Suzuki-Miyaura-type reaction.

Efficient Cross-Coupling of Secondary Alkyltrifluoroborates with Aryl Chlorides—Reaction Discovery Using Parallel Microscale Experimentation

Microscale parallel experimentation was used to discover three catalyst systems capable of coupling secondary organotrifluoroborates with sterically and electronically demanding aryl chlorides and bromides. The ensuing results represent the first comprehensive study of alkylboron coupling to aryl chlorides and, in particular, using secondary alkylboron partners. A ligand-dependent beta-hydride elimination/reinsertion mechanism was implicated in the cross-coupling of more hindered substrates, leading to isomeric mixtures of coupled products in some cases.

Stereospecific cross-coupling of secondary alkyl β-trifluoroboratoamides.

The stereospecific cross-coupling of enantioenriched nonbenzylic secondary alkyl boron compounds has been achieved. The high selectivity toward product formation over an undesired β-H elimination pathway is achieved via an intramolecular coordination of an ancillary carbonyl to the metal center in the diorganopalladium intermediate.

Copper-Facilitated Suzuki Reactions: Application to 2-Heterocyclic Boronates

The palladium-catalyzed Suzuki-Miyaura reaction has been utilized as one of the most powerful methods for C-C bond formation. However, Suzuki reactions of electron-deficient 2-heterocyclic boronates generally give low conversions and remain challenging. The successful copper(I) facilitated Suzuki coupling of 2-heterocyclic boronates that is broad in scope is reported. Use of this methodology affords greatly enhanced yields of these notoriously difficult couplings. Furthermore, mechanistic investigations suggest a possible role of copper in the catalytic cycle.

Nanomole-scale high-throughput chemistry for the synthesis of complex molecules

Breaking through the milligram floor When chemists synthesize compounds, the threshold for success is at least a milligram of product. This has been true for decades—even though biochemical assays have long since descended into microgram territory—and results in part from the constraints of characterization methods. Buitrago Santanilla et al. present an automated dosing and characterization protocol for optimizing chemical reaction conditions on the microgram scale. This allowed them to screen numerous base and ligand combinations for catalytic C-N bond-forming reactions between complex pairs of compounds, in short supply, that resisted standard coupling conditions. Science, this issue p. 49 Automated technology enables chemical reaction optimization using micrograms of material. At the forefront of new synthetic endeavors, such as drug discovery or natural product synthesis, large quantities of material are rarely available and timelines are tight. A miniaturized automation platform enabling high-throughput experimentation for synthetic route scouting to identify conditions for preparative reaction scale-up would be a transformative advance. Because automated, miniaturized chemistry is difficult to carry out in the presence of solids or volatile organic solvents, most of the synthetic “toolkit” cannot be readily miniaturized. Using palladium-catalyzed cross-coupling reactions as a test case, we developed automation-friendly reactions to run in dimethyl sulfoxide at room temperature. This advance enabled us to couple the robotics used in biotechnology with emerging mass spectrometry–based high-throughput analysis techniques. More than 1500 chemistry experiments were carried out in less than a day, using as little as 0.02 milligrams of material per reaction.

Palladium-Catalyzed C(sp3)–H Arylation of Diarylmethanes at Room Temperature: Synthesis of Triarylmethanes via Deprotonative-Cross-Coupling Processes

Although metal-catalyzed direct arylation reactions of non- or weakly acidic C-H bonds have recently received much attention, chemists have relied heavily on substrates with appropriately placed directing groups to steer reactivity. To date, examples of intermolecular arylation of unactivated C(sp(3))-H bonds in the absence of a directing group remain scarce. We report herein the first general, high-yielding, and scalable method for palladium-catalyzed C(sp(3))-H arylation of simple diarylmethane derivatives with aryl bromides at room temperature. This method facilitates access to a variety of sterically and electronically diverse hetero- and nonheteroaryl-containing triarylmethanes, a class of compounds with various applications and interesting biological activity. Key to the success of this approach is an in situ metalation of the substrate via C-H deprotonation under catalytic cross-coupling conditions, which is referred to as a deprotonative-cross-coupling process (DCCP). Base and catalyst identification were performed by high-throughput experimentation (HTE) and led to a unique base/catalyst combination [KN(SiMe(3))(2)/Pd-NiXantphos] that proved to efficiently promote the room-temperature DCCP of diarylmethanes. Additionally, the DCCP exhibits remarkable chemoselectivity in the presence of substrates that are known to undergo O-, N-, enolate-, and C(sp(2))-H arylation.

Suzuki−Miyaura Cross-Coupling Reactions of Primary Alkyltrifluoroborates with Aryl Chlorides

Parallel microscale experimentation was used to develop general conditions for the Suzuki-Miyaura cross-coupling of diversely functionalized primary alkyltrifluoroborates with a variety of aryl chlorides. These conditions were found to be amenable to coupling with aryl bromides, iodides, and triflates as well. The conditions that were previously identified through similar techniques to promote the cross-coupling of secondary alkyltrifluoroborates with aryl chlorides were not optimal for the primary alkyltrifluoroborates, thus demonstrating the value of parallel experimentation to develop novel, substrate specific results.

NiXantphos: A Deprotonatable Ligand for Room-Temperature Palladium-Catalyzed Cross-Couplings of Aryl Chlorides

Although the past 15 years have witnessed the development of sterically bulky and electron-rich alkylphosphine ligands for palladium-catalyzed cross-couplings with aryl chlorides, examples of palladium catalysts based on either triarylphosphine or bidentate phosphine ligands for efficient room temperature cross-coupling reactions with unactivated aryl chlorides are rare. Herein we report a palladium catalyst based on NiXantphos, a deprotonatable chelating aryldiphosphine ligand, to oxidatively add unactivated aryl chlorides at room temperature. Surprisingly, comparison of an extensive array of ligands revealed that under the basic reaction conditions the resultant heterobimetallic Pd–NiXantphos catalyst system outperformed all the other mono- and bidentate ligands in a deprotonative cross-coupling process (DCCP) with aryl chlorides. The DCCP with aryl chlorides affords a variety of triarylmethane products, a class of compounds with various applications and interesting biological activity. Additionally, the DCCP exhibits remarkable chemoselectivity in the presence of aryl chloride substrates bearing heteroaryl groups and sensitive functional groups that are known to undergo 1,2-addition, aldol reaction, and O-, N-, enolate-α-, and C(sp2)–H arylations. The advantages and importance of the Pd–NiXantphos catalyst system outlined herein make it a valuable contribution for applications in Pd-catalyzed arylation reactions with aryl chlorides.

Aryl amination using ligand-free Ni(II) salts and photoredox catalysis

A light approach to C-N bond formation The need to form C-N bonds arises frequently in drug discovery research. One versatile approach involves the attachment of the C and N fragments to a Pd catalyst. This approach needs a bulky ligand to “crowd” the fragments together off the metal center. Corcoran et al. present a complementary approach that uses Ni in place of Pd. Instead of the bulky ligand, they used a light-activated cocatalyst that strips an electron from the Ni to accelerate the bond formation. A screen involving elaborately substituted reagents confirmed the utility of this approach in cases that challenge the traditional Pd coupling. Science, this issue p. 279 Transient oxidation of nickel by a photoexcited cocatalyst accelerates C–N bond formation without the need for bulky ligands. Over the past two decades, there have been major developments in transition metal–catalyzed aminations of aryl halides to form anilines, a common structure found in drug agents, natural product isolates, and fine chemicals. Many of these approaches have enabled highly efficient and selective coupling through the design of specialized ligands, which facilitate reductive elimination from a destabilized metal center. We postulated that a general and complementary method for carbon–nitrogen bond formation could be developed through the destabilization of a metal amido complex via photoredox catalysis, thus providing an alternative approach to the use of structurally complex ligand systems. Here, we report the development of a distinct mechanistic paradigm for aryl amination using ligand-free nickel(II) salts, in which facile reductive elimination from the nickel metal center is induced via a photoredox-catalyzed electron-transfer event.

Scope of the Palladium-Catalyzed Aryl Borylation Utilizing Bis-Boronic Acid

The Suzuki-Miyaura reaction has become one of the more useful tools for synthetic organic chemists. Until recently, there did not exist a direct way to make the most important component in the coupling reaction, namely the boronic acid. Current methods to make boronic acids often employ harsh or wasteful reagents to prepare boronic acid derivatives and require additional steps to afford the desired boronic acid. The scope of the previously reported palladium-catalyzed, direct boronic acid synthesis is unveiled, which includes a wide array of synthetically useful aryl electrophiles. It makes use of the newly available second generation Buchwald XPhos preformed palladium catalyst and bis-boronic acid. For ease of isolation and to preserve the often sensitive C-B bond, all boronic acids were readily converted to their more stable trifluoroborate counterparts.