Stan Miziarski

The Sydney‐AAO Multi‐object Integral field spectrograph

We demonstrate a novel technology that combines the power of the multi-object spectrograph with the spatial multiplex advantage of an integral field spectrograph (IFS). The SydneyAAO (Australian Astronomical Observatory) Multi-object IFS (SAMI) is a prototype widefield system at the Anglo-Australian Telescope (AAT) that allows 13 imaging fibre bundles (‘hexabundles’) to be deployed over a 1-degree diameter field of view. Each hexabundle comprises 61 lightly fused multi-mode fibres with reduced cladding and yields a 75 per cent filling factor. Each fibre core diameter subtends 1.6 arcsec on the sky and each hexabundle has a field of view of 15 arcsec diameter. The fibres are fed to the flexible AAOmega double-beam spectrograph, which can be used at a range of spectral resolutions (R = λ/δλ ≈ 1700–13 000) over the optical spectrum (3700–9500 A). We present the first spectroscopic results obtained with SAMI for a sample of galaxies at z ≈ 0.05. We discuss the prospects of implementing hexabundles at a much higher multiplex over wider fields of view in order to carry out spatially resolved spectroscopic surveys of 10 4 –10 5 galaxies.

First Science with SAMI: A Serendipitously Discovered Galactic Wind in ESO 185-G031

We present the first scientific results from the Sydney-AAO Multi-Object IFS (SAMI) at the Anglo-Australian Telescope. This unique instrument deploys 13 fused fiber bundles (hexabundles) across a one-degree field of view allowing simultaneous spatially resolved spectroscopy of 13 galaxies. During the first SAMI commissioning run, targeting a single galaxy field, one object (ESO 185-G031) was found to have extended minor axis emission with ionization and kinematic properties consistent with a large-scale galactic wind. The importance of this result is twofold: (1) fiber bundle spectrographs are able to identify low surface brightness emission arising from extranuclear activity and (2) such activity may be more common than presently assumed because conventional multi-object spectrographs use single-aperture fibers and spectra from these are nearly always dominated by nuclear emission. These early results demonstrate the extraordinary potential of multi-object hexabundle spectroscopy in future galaxy surveys.

GNOSIS: the first instrument to use fiber Bragg gratings for OH suppression

The near-infrared is an important part of the spectrum in astronomy, especially in cosmology because the light from objects in the early universe is redshifted to these wavelengths. However, deep near-infrared observations are extremely difficult to make from ground-based telescopes due to the bright background from the atmosphere. Nearly all of this background comes from the bright and narrow emission lines of atmospheric hydroxyl (OH) molecules. The atmospheric background cannot be easily removed from data because the brightness fluctuates unpredictably on short timescales. The sensitivity of ground-based optical astronomy far exceeds that of near-infrared astronomy because of this long-standing problem. GNOSIS is a prototype astrophotonic instrument that utilizes “OH suppression fibers” consisting of fiber Bragg gratings and photonic lanterns to suppress the 103 brightest atmospheric emission doublets between 1.47 and 1.7µm. GNOSIS was commissioned at the 3.9m Anglo-Australian Telescope with the IRIS2 spectrograph to demonstrate the potential of OH suppression fibers, but may be potentially used with any telescope and spectrograph combination. Unlike previous atmospheric suppression techniques GNOSIS suppresses the lines before dispersion and in a manner that depends purely on wavelength. We present the instrument design and report the results of laboratory and on-sky tests from commissioning. While these tests demonstrated high throughput (� 60%) and excellent suppression of the skylines by the OH suppression fibers, surprisingly GNOSIS produced no significant reduction in the interline background and the sensitivity of GNOSIS+IRIS2 is about the same as IRIS2. It is unclear whether the lack of reduction in the interline background is due to physical sources or systematic errors as the observations are detector noise dominated. OH suppression fibers could potentially impact ground-based astronomy at the level of adaptive optics or greater. However, until a clear reduction in the interline background and the corresponding increasing in sensitivity is demonstrated optimized OH suppression fibers paired with a fiber-fed spectrograph will at least provide a real benefit at low resolving powers. Subject headings: atmospheric effects – infrared: diffuse background – instrumentation: miscellaneous

Suppression of the near-infrared OH night sky lines with fibre Bragg gratings - first results

The background noise between 1 and 1.8 ?mu m in ground-based instruments is dominated by atmospheric emission from hydroxyl molecules. We have built and commissioned a new instrument, the Gemini Near-infrared OH Suppression Integral Field Unit (IFU) System (GNOSIS), which suppresses 103 OH doublets between 1.47 and 1.7?mu m by a factor of 1000 with a resolving power of 10?000. We present the first results from the commissioning of GNOSIS using the IRIS2 spectrograph at the Anglo-Australian Telescope. We present measurements of sensitivity, background and throughput. The combined throughput of the GNOSIS fore-optics, grating unit and relay optics is 36?per cent, but this could be improved to 46?per cent with a more optimal design. We measure strong suppression of the OH lines, confirming that OH suppression with fibre Bragg gratings will be a powerful technology for low-resolution spectroscopy. The integrated OH suppressed background between 1.5 and 1.7 mu m is reduced by a factor of 9 compared to a control spectrum using the same system without suppression. The potential of low-resolution OH-suppressed spectroscopy is illustrated with example observations of Seyfert galaxies and a low-mass star. The GNOSIS background is dominated by detector dark current below 1.67 mu m and by thermal emission above 1.67 mu m. After subtracting these, we detect an unidentified residual interline component of 860 +/- 210 photons s-1 m-2?arcsec-2?mu m-1, comparable to previous measurements. This component is equally bright in the suppressed and control spectra. We have investigated the possible source of the interline component, but were unable to discriminate between a possible instrumental artefact and intrinsic atmospheric emission. Resolving the source of this emission is crucial for the design of fully optimized OH suppression spectrographs. The next-generation OH suppression spectrograph will be focused on resolving the source of the interline component, taking advantage of better optimization for a fibre Bragg grating feed incorporating refinements of design based on our findings from GNOSIS. We quantify the necessary improvements for an optimal OH suppressing fibre spectrograph design.

Echidna: a multifiber positioner for the Subaru prime focus

The aim for a spectrograph feed from the Subaru prime focus is to have 400 fibers. Since the are of the field is only approximately 1/10 that of the 400 fiber two degree field system on the Anglo-Australian Telescope, placement of magnetic buttons by a robot, as done for 2df, was not considered applicable. Instead, a concept has been developed in which each fiber is held on a spine which can be tilted to position its tip anywhere within a circle. With targets randomly scattered over the field and the radial range for each spine equal to the spine pitch, the success rate in reaching targets is acceptably high. At the f/2 focus, a spine tilt of 1/20 radian is just acceptable and requires the spines be 140 mm long. Two basic mechanisms for tilting and holding such a spine have been investigated experimentally. The first uses three commercial miniature linear actuators set parallel and linked to the base of the spine through simple flexures. A prototype has been built and demonstrated to perform satisfactorily. Another approach is to mount the spine ona ball joint and drive it directly in tip and tilt using a bending piezo impact drive. A prototype of this from has been built; initial test are promising.

Progress with 6dF : a multi-object spectroscopy system for all-sky surveys

6dF is a fully-automated front-end for the multi-object fiber-coupled spectroscopy system of the UK Schmidt Telescope (UKST). It is a magnetic pick-place system with an positioning robot, and it will replace the manually- configured FLAIR front-end that has been operated on the telescope in its present form since 1992. The one-hour reconfiguration time of 6dF makes a range of projects possible that could not be contemplated with FLAIR. Most notable of these is the 6dF Galaxy Survey, a two-part survey of redshifts and peculiar velocities that will become the main task of the Schmidt-Telescope once 6dF is commissioned late in 2000. This will eventually lead to a determination of the large-scale distribution of mass density in the local Universe, which will be a significant achievement for a telescope in the 1-m class. The instrument will be capable of carrying out other survey projects, and 6dF spectroscopy will be the UKSTs main science product for at least the next five years. A notable aspect of 6dF has been the very rapid progress made in its construction by the Anglo-Australian Observatorys Instrumentation Division.

First light results from the High Efficiency and Resolution Multi-Element Spectrograph at the Anglo-Australian Telescope

Abstract. The High Efficiency and Resolution Multi Element Spectrograph, HERMES, is a facility-class optical spectrograph for the Anglo-Australian Telescope (AAT). It is designed primarily for Galactic Archaeology, the first major attempt to create a detailed understanding of galaxy formation and evolution by studying the history of our own galaxy, the Milky Way. The goal of the GALAH survey is to reconstruct the mass assembly history of the Milky Way through a detailed chemical abundance study of one million stars. The spectrograph is based at the AAT and is fed by the existing 2dF robotic fiber positioning system. The spectrograph uses volume phase holographic gratings to achieve a spectral resolving power of 28,000 in standard mode and also provides a high-resolution mode ranging between 40,000 and 50,000 using a slit mask. The GALAH survey requires an SNR greater than 100 for a star brightness of V=14 in an exposure time of one hour. The total spectral coverage of the four channels is about 100 nm between 370 and 1000 nm for up to 392 simultaneous targets within the 2-degree field of view. HERMES has been commissioned over three runs, during bright time in October, November, and December 2013, in parallel with the beginning of the GALAH pilot survey, which started in November 2013. We present the first-light results from the commissioning run and the beginning of the GALAH survey, including performance results such as throughput and resolution, as well as instrument reliability.

MOHAWK: a 4000-fiber positioner for DESpec

We present a concept for a 4000-fibre positioner for DESpec, based on the Echidna ‘tilting spine’ technology. The DESpec focal plane is 450mm across and curved, and the required pitch is ~6.75mm. The size, number of fibers and curvature are all comparable with various concept studies for similar instruments already undertaken at the AAO, but present new challenges in combination. A simple, low-cost, and highly modular design is presented, consisting of identical modules populated by identical spines. No show-stopping issues in accommodating either the curvature or the smaller pitch have been identified, and the actuators consist largely of off-the-shelf components. The actuators have been prototyped at AAO, and allow reconfiguration times of ~15s to reach position errors 7 microns or less. Straightforward designs for metrology, acquisition, and guiding are also proposed. The throughput losses of the entire positioner system are estimated to be ~15%, of which 6.3% is attributable to the tilting-spine technology.

Hector: a high-multiplex survey instrument for spatially resolved galaxy spectroscopy

First light from the SAMI (Sydney-AAO Multi-object IFS) instrument at the Anglo-Australian Telescope (AAT) has recently proven the viability of fibre hexabundles for multi-IFU spectroscopy. SAMI, which comprises 13 hexabundle IFUs deployable over a 1 degree field-of-view, has recently begun science observations, and will target a survey of several thousand galaxies. The scientific outputs from such galaxy surveys are strongly linked to survey size, leading the push towards instruments with higher multiplex capability. We have begun work on a new instrument concept, called Hector, which will target a spatially-resolved spectroscopic survey of up to one hundred thousand galaxies. The key science questions for this instrument concept include how do galaxies get their gas, how is star formation and nuclear activity affected by environment, what is the role of feedback, and what processes can be linked to galaxy groups and clusters. One design option for Hector uses the existing 2 degree field-of view top end at the AAT, with 50 individual robotically deployable 61-core hexabundle IFUs, and 3 fixed format spectrographs covering the visible wavelength range with a spectral resolution of approximately 4000. A more ambitious option incorporates a modified top end at the AAT with a new 3 degree field-of-view wide-field-corrector and 100 hexabundle IFUs feeding 6 spectrographs.

CYCLOPS2: the fibre image slicer upgrade for the UCLES high resolution spectrograph

CYCLOPS2 is an upgrade for the UCLES high resolution spectrograph on the Anglo-Australian Telescope, scheduled for commissioning in semester 2012A. By replacing the 5 mirror Coud´e train with a Cassegrain mounted fibre-based image slicer CYCLOPS2 simultaneously provides improved throughput, reduced aperture losses and increased spectral resolution. Sixteen optical fibres collect light from a 5.0 arcsecond2 area of sky and reformat it into the equivalent of a 0.6 arcsecond wide slit, delivering a spectral resolution of R= 70000 and up to twice as much flux as the standard 1 arcsecond slit of the Coud´e train. CYCLOPS2 also adds support for simultaneous ThAr wavelength calibration via a dedicated fibre. CYCLOPS2 consists of three main components, the fore-optics unit, fibre bundle and slit unit. The fore optics unit incorporates magnification optics and a lenslet array and is designed to mount to the CURE Cassegrain instrument interface, which provides acquisition, guiding and calibration facilities. The fibre bundle transports the light from the Cassegrain focus to the UCLES spectrograph at Coud´e and also includes a fibre mode scrambler. The slit unit consists of the fibre slit and relay optics to project an image of the slit onto the entrance aperture of the UCLES spectrograph. CYCLOPS2 builds on experience with the first generation CYCLOPS fibre system, which we also describe in this paper. We present the science case for an image slicing fibre feed for echelle spectroscopy and describe the design of CYCLOPS and CYCLOPS2.