Stanislav Nikonov

Crystal structure of ferrochelatase: the terminal enzyme in heme biosynthesis

BACKGROUND The metallation of closed ring tetrapyrroles resulting in the formation of hemes, chlorophylls and vitamin B12 is catalyzed by specific enzymes called chelatases. Ferrochelatase catalyzes the terminal step in heme biosynthesis by inserting ferrous ion into protoporphyrin IX by a mechanism that is poorly understood. Mutations in the human gene for ferrochelatase can result in the disease erythropoietic protoporphyria, and a further understanding of the mechanism of this enzyme is therefore of clinical interest. No three-dimensional structure of a tetrapyrrole metallation enzyme has been available until now. RESULTS The three-dimensional structure of Bacillus subtilis ferrochelatase has been determined at 1.9 A resolution by the method of multiple isomorphous replacement. The structural model contains 308 of the 310 amino acid residues of the protein and 198 solvent molecules. The polypeptide is folded into two similar domains each with a four-stranded parallel beta sheet flanked by alpha helices. Structural elements from both domains build up a cleft, which contains several amino acid residues that are invariant in ferrochelatases from different organisms. In crystals soaked with gold and cadmium salt solutions, the metal ion was found to be coordinated to the conserved residue His 183, which is located in the cleft. This histidine residue has previously been suggested to be involved in ferrous ion binding. CONCLUSIONS Ferrochelatase seems to have a structurally conserved core region that is common to the enzyme from bacteria, plants and mammals. We propose that porphyrin binds in the identified cleft; this cleft also includes the metal-binding site of the enzyme. It is likely that the structure of the cleft region will have different conformations upon substrate binding and release.

Structure of the L1 protuberance in the ribosome.

The L1 protuberance of the 50S ribosomal subunit is implicated in the release/disposal of deacylated tRNA from the E site. The apparent mobility of this ribosomal region has thus far prevented an accurate determination of its three-dimensional structure within either the 50S subunit or the 70S ribosome. Here we report the crystal structure at 2.65 Å resolution of ribosomal protein L1 from Sulfolobus acidocaldarius in complex with a specific 55-nucleotide fragment of 23S rRNA from Thermus thermophilus. This structure fills a major gap in current models of the 50S ribosomal subunit. The conformations of L1 and of the rRNA fragment differ dramatically from those within the crystallographic model of the T. thermophilus 70S ribosome. Incorporation of the L1–rRNA complex into the structural models of the T. thermophilus 70S ribosome and the Deinococcus radiodurans 50S subunit gives a reliable representation of most of the L1 protuberance within the ribosome.

Crystal structure of the S15-rRNA complex.

In bacterial ribosomes, the small (30S) ribosomal subunit is composed of 16S rRNA and 21 distinct proteins. Ribosomal protein S15 is of particular interest because it binds primarily to 16S rRNA and is required for assembly of the small subunit and for intersubunit association, thus representing a key element in the assembly of a whole ribosome. Here we report the 2.8 Å resolution crystal structure of the highly conserved S15–rRNA complex. Protein S15 interacts in the minor groove with a G-U/G-C motif and a three-way junction. The latter is constrained by a conserved base triple and stacking interactions, and locked into place by magnesium ions and protein side chains, mainly through interactions with the unique three-dimensional geometry of the backbone. The present structure gives insights into the dual role of S15 in ribosome assembly and translational regulation.

Structure of Pseudomonas aeruginosa Hfq protein.

The structure of the Hfq protein from Pseudomonas aeruginosa was determined using two different ionic conditions. In both cases the molecules formed identical hexameric rings, but some variations in the crystal packing were revealed. Hfq belongs to the family of Sm/LSm proteins, the members of which can form hexameric as well as heptameric rings. Comparative analysis of known structures of this protein family shows that the fragment of the Sm-fold responsible for oligomerization is strongly structurally conserved. In the heptameric ring, three conserved hydrogen bonds between beta-strands of adjacent molecules hold together the monomers, whereas in the hexameric rings of Hfq an additional conserved inaccessible hydrogen bond between neighbouring monomers is observed.

The crystal structure of ribosomal protein L22 from Thermus thermophilus: insights into the mechanism of erythromycin resistance

BACKGROUND . The ribosomal protein L22 is one of five proteins necessary for the formation of an early folding intermediate of the 23S rRNA. L22 has been found on the cytoplasmic side of the 50S ribosomal subunit. It can also be labeled by an erythromycin derivative bound close to the peptidyl-transfer center at the interface side of the 50S subunit, and the amino acid sequence of an erythromycin-resistant mutant is known. Knowing the structure of the protein may resolve this apparent conflict regarding the location of L22 on the ribosome. RESULTS . The structure of Thermus thermophilus L22 was solved using X-ray crystallography. L22 consists of a small alpha+beta domain and a protruding beta hairpin that is 30 A long. A large part of the surface area of the protein has the potential to be involved in interactions with rRNA. A structural similarity to other RNA-binding proteins is found, possibly indicating a common evolutionary origin. CONCLUSIONS . The extensive surface area of L22 has the characteristics of an RNA-binding protein, consistent with its role in the folding of the 23S rRNA. The erythromycin-resistance conferring mutation is located in the protruding beta hairpin that is postulated to be important in L22-rRNA interactions. This region of the protein might be at the erythromycin-binding site close to the peptidyl transferase center, whereas the opposite end may be exposed to the cytoplasm.

Ribosomal protein L1 recognizes the same specific structural motif in its target sites on the autoregulatory mRNA and 23S rRNA

The RNA-binding ability of ribosomal protein L1 is of profound interest since the protein has a dual function as a ribosomal protein binding rRNA and as a translational repressor binding its mRNA. Here, we report the crystal structure of ribosomal protein L1 in complex with a specific fragment of its mRNA and compare it with the structure of L1 in complex with a specific fragment of 23S rRNA determined earlier. In both complexes, a strongly conserved RNA structural motif is involved in L1 binding through a conserved network of RNA–protein H-bonds inaccessible to the solvent. These interactions should be responsible for specific recognition between the protein and RNA. A large number of additional non-conserved RNA–protein H-bonds stabilizes both complexes. The added contribution of these non-conserved H-bonds makes the ribosomal complex much more stable than the regulatory one.

Structure of ribosomal protein TL5 complexed with RNA provides new insights into the CTC family of stress proteins

The crystal structure of Thermus thermophilus ribosomal protein TL5 in complex with a fragment of Escherichia coli 5S rRNA has been determined at 2.3 A resolution. The protein consists of two domains. The structure of the N-terminal domain is close to the structure of E. coli ribosomal protein L25, but the C-terminal domain represents a new fold composed of seven beta-strands connected by long loops. TL5 binds to the RNA through its N-terminal domain, whereas the C-terminal domain is not included in this interaction. Cd(2+) ions, the presence of which improved the crystal quality significantly, bind only to the protein component of the complex and stabilize the protein molecule itself and the interactions between the two molecules in the asymmetric unit of the crystal. The TL5 sequence reveals homology to the so-called general stress protein CTC. The hydrophobic cores which stabilize both TL5 domains are highly conserved in CTC proteins. Thus, all CTC proteins may fold with a topology close to that of TL5.

Archaeal ribosomal protein L1: the structure provides new insights into RNA binding of the L1 protein family

BACKGROUND L1 is an important primary rRNA-binding protein, as well as a translational repressor that binds mRNA. It was shown that L1 proteins from some bacteria and archaea are functionally interchangeable within the ribosome and in the repression of translation. The crystal structure of bacterial L1 from Thermus thermophilus (TthL1) has previously been determined. RESULTS We report here the first structure of a ribosomal protein from archaea, L1 from Methanococcus jannaschii (MjaL1). The overall shape of the two-domain molecule differs dramatically from that of its bacterial counterpart (TthL1) because of the different relative orientations of the domains. Two strictly conserved regions of the amino acid sequence, each belonging to one of the domains and positioned close to each other in the interdomain cavity of TthL1, are separated by about 25 A in MjaL1 owing to a significant opening of the structure. These regions are structurally highly conserved and are proposed to be the specific RNA-binding sites. CONCLUSIONS The unusually high RNA-binding affinity of MjaL1 might be explained by the exposure of its highly conserved regions. The open conformation of MjaL1 is strongly stabilized by nonconserved interdomain interactions and suggests that the closed conformations of L1 (as in TthL1) open upon RNA binding. Comparison of the two L1 protein structures reveals a high conformational variability of this ribosomal protein. Determination of the MjaL1 structure offers an additional variant for fitting the L1 protein into electron-density maps of the 50S ribosomal subunit.

The structures of mutant forms of Hfq from Pseudomonas aeruginosa reveal the importance of the conserved His57 for the protein hexamer organization.

The bacterial Sm-like protein Hfq forms homohexamers both in solution and in crystals. The monomers are organized as a continuous beta-sheet passing through the whole hexamer ring with a common hydrophobic core. Analysis of the Pseudomonas aeruginosa Hfq (PaeHfq) hexamer structure suggested that solvent-inaccessible intermonomer hydrogen bonds created by conserved amino-acid residues should also stabilize the quaternary structure of the protein. In this work, one such conserved residue, His57, in PaeHfq was replaced by alanine, threonine or asparagine. The crystal structures of His57Thr and His57Ala Hfq were determined and the stabilities of all of the mutant forms and of the wild-type protein were measured. The results obtained demonstrate the great importance of solvent-inaccessible conserved hydrogen bonds between the Hfq monomers in stabilization of the hexamer structure.

Structure of Citrobacter freundii l-methionine γ-­lyase

l-Methionine γ-lyase (MGL) is a pyridoxal 5′-phosphate (PLP) dependent enzyme that catalyzes γ-elimination of l-methionine. The crystal structure of MGL from Citrobacter freundii has been determined at 1.9 A resolution. The spatial fold of the protein is similar to those of MGLs from Pseudomonas putida and Trichomonas vaginalis. The comparison of these structures revealed that there are differences in PLP-binding residues and positioning of the surrounding flexible loops.