Stefan A. Maier

Plasmonics: Localization and guiding of electromagnetic energy in metal/dielectric structures

We review the basic physics of surface-plasmon excitations occurring at metal/dielectric interfaces with special emphasis on the possibility of using such excitations for the localization of electromagnetic energy in one, two, and three dimensions, in a context of applications in sensing and waveguiding for functional photonic devices. Localized plasmon resonances occurring in metallic nanoparticles are discussed both for single particles and particle ensembles, focusing on the generation of confined light fields enabling enhancement of Raman-scattering and nonlinear processes. We then survey the basic properties of interface plasmons propagating along flat boundaries of thin metallic films, with applications for waveguiding along patterned films, stripes, and nanowires. Interactions between plasmonic structures and optically active media are also discussed.

Plasmonics—A Route to Nanoscale Optical Devices

The further integration of optical devices will require the fabrication of waveguides for electromagnetic energy below the diffraction limit of light. We investigate the possibility of using arrays of closely spaced metal nanoparticles for this purpose. Coupling between adjacent particles sets up coupled plasmon modes that give rise to coherent propagation of energy along the array. A point dipole analysis predicts group velocities of energy transport that exceed 0.1c along straight arrays and shows that energy transmission and switching through chain networks such as corners (see Figure) and tee structures is possible at high efficiencies. Radiation losses into the far field are expected to be negligible due to the near-field nature of the coupling, and resistive heating leads to transmission losses of about 6 dB/lm for gold and silver particles. We analyze macroscopic analogues operating in the microwave regime consisting of closely spaced metal rods by experiments and full field electrodynamic simulations. The guiding structures show a high confinement of the electromagnetic energy and allow for highly variable geometries and switching. Also, we have fabricated gold nanoparticle arrays using electron beam lithography and atomic force microscopy manipulation. These plasmon waveguides and switches could be the smallest devices with optical functionality.

Observation of coupled plasmon-polariton modes in Au nanoparticle chain waveguides of different lengths: Estimation of waveguide loss

Near-field interactions between closely spaced Au nanoparticles were characterized by studying the spectral position of the extinction bands corresponding to longitudinal (L) and transverse (T) plasmon-polariton modes of Au nanoparticle chains. Far-field spectroscopy and finite-difference time-domain simulations on arrays of 50 nm diameter Au spheres with an interparticle spacing of 75 nm both show a splitting DeltaE between the L and T modes that increases with chain length and saturates at a length of seven particles at DeltaE = 65 meV. We show that the measured splitting will result in a propagation loss of 3 dB/15 nm for energy transport. Calculations indicate that this loss can be reduced by at least one order of magnitude by modifying the shape of the constituent particles.

Experimental demonstration of fiber-accessible metal nanoparticle plasmon waveguides for planar energy guiding and sensing

Experimental evidence of mode-selective evanescent power coupling at telecommunication frequencies with efficiencies up to 75% from a tapered optical fiber to a metal nanoparticle plasmon waveguide is presented. The waveguide consists of a two-dimensional square lattice of lithographically defined Au nanoparticles on an optically thin silicon membrane. The dispersion and attenuation properties of the waveguide are analyzed using the fiber taper. The high efficiency of power transfer into these waveguides solves the coupling problem between conventional optics and plasmonic devices and could lead to the development of highly efficient plasmonic sensors and optical switches.

Electromagnetic energy transport along arrays of closely spaced metal rods as an analogue to plasmonic devices

The transport of electromagnetic energy along structures consisting of arrays of closely spaced metal rods (spacing = 0.2 cm) was investigated in the microwave regime at 8.0 GHz (lambda= 3.7 cm). The dispersion relation shows that information transport occurs at a group velocity of 0.6c. The electromagnetic energy is highly confined to the arrays (90% within a distance of 0.05lambda from the array). The propagation loss in a straight array is 3 dB/8 cm. Routing of energy around 90° corners is possible with a power loss of 3–4 dB. Analogies to plasmon wires consisting of arrays of nm-size metal clusters are discussed.

Optical properties and structural characteristics of ZnMgO grown by plasma assisted molecular beam epitaxy

Wurtzite Zn1−xMgxO thin films with Mg contents between x=0 and x=0.37 were grown on c-plane sapphire substrates by plasma assisted molecular beam epitaxy using a MgO/ZnMgO buffer layer. The a-lattice parameter is independent from the Mg concentration, whereas the c-lattice parameter decreases from 5.20 A for x=0 to 5.17 A for x=0.37, indicating pseudomorphic growth. The near band edge photoluminescence shows a blueshift with increasing Mg concentration to an emission energy of 4.11 eV for x=0.37. Simultaneously, the energetic position of the deep defect luminescence shows a linear shift from 2.2 to 2.8 eV. Low temperature transmission measurements reveal strong excitonic features for the investigated composition range and alloy broadening effects for higher Mg contents. The Stokes shift as well as the Urbach energy is increased to values of up to 125 and 54 meV for x=0.37, respectively, indicating exciton localization due to alloy fluctuations.

Low-loss fiber accessible plasmon waveguide for planar energy guiding and sensing

A metal nanoparticle plasmon waveguide for electromagnetic energy transport utilizing dispersion engineering to increase lateral energy confinement via a two-dimensional pattern of Au dots on an optically thin Si membrane is described. Using finite-difference time-domain simulations and coupled-mode theory, we show that phase-matched evanescent excitation from conventional fiber tapers is possible with efficiencies >90% for realistic geometries. Energy loss in this waveguide is mainly due to material absorption, allowing for 1/e energy decay distances of about 320 µm for excitation at telecommunication frequencies. This concept can be extended to the visible regime and promises applications in optical energy guiding, optical sensing, and switching.

Mega-electron-volt ion beam induced anisotropic plasmon resonance of silver nanocrystals in glass

30 MeV Si ion beam irradiation of silica glass containing Ag nanocrystals causes alignment of Ag nanocrystals in arrays along the ion tracks. Optical transmission measurements show a large splitting of the surface plasmon resonance bands for polarizations longitudinal and transversal to the arrays. The splitting is in qualitative agreement with a model for near-field electromagnetic plasmon coupling within the arrays. Resonance shifts as large as 1.5 eV are observed, well into the near-infrared.

Metal nanoparticle arrays for near-field optical lithography

We have recently proposed a new approach to optical lithography that could be used to replicate arrays of metal nanoparticles using broad beam illumination with visible light and standard photoresist. The method relies on resonant excitation of the surface plasmon oscillation in the nanoparticles. When excited at the surface plasmon frequency, a resonantly enhanced dipole field builds up around the nanoparticles. This dipole field is used to locally expose a thin layer of photoresist, generating a replica of the original pattern in the resist. Silver nanoparticles on photoresist can be resonantly excited at wavelengths ranging from 410 nm to 460 nm, allowing for resonantly enhanced exposure of standard g-line photoresist. Finite Difference Time Domain (FDTD) simulations of isolated silver particles on a thin resist layer show that broad beam illumination with p-polarized light at a wavelength of 439 nm can produce features as small as 30 nm, or λ/14. Depending on exposure time lateral spot sizes ranging from 30 to 80 nm with exposure depths ranging from 12 to 45 nm can be achieved. We discuss the effect of particle-particle interactions in the replica formation process. Experiments on low areal density Ag nanoparticle arrays are discussed. Resist layers (thickness 75 nm) in contact with 40 nm Ag nanoparticles were exposed using 410 nm light and were subsequently developed. Atomic Force Microscopy on these samples reveals nanoscale depressions in the resist, providing evidence for plasmon-enhanced resist exposure.

Observation of coupled plasmon-polariton modes of plasmon waveguides for electromagnetic energy transport below the diffraction limit

We investigate the possibility of using arrays of closely spaced metal nanoparticles as plasmon waveguides for electromagnetic energy below the diffraction limit of light. Far-field spectroscopy on arrays of closely spaced 50 nm Au particles fabricated using electron beam lithography reveals the presence of near-field optical particle interactions that lead to shifts in the plasmon resonance frequencies for longitudinal and transverse excitations. We link this observation to a point-dipole model for energy transfer in plasmon waveguides and give an estimate of the expected group velocities and energy decay lengths for the fabricated structures. A near-field optical excitation and detection scheme for energy transport is proposed and demonstrated. The fabricated structures show a high propagation loss of about 3 dB / 15 nm which renders a direct experimental observation of energy transfer impossible. The nature of the loss and ways to decrease it by an order of magnitude are discussed. We also present finite-difference time-domain simulations on the energy transfer properties of plasmon waveguides.