Stilian Ivanov Pandev

Improving OCD time to solution using Signal Response Metrology

In recent technology nodes, advanced process and novel integration scheme have challenged the precision limits of conventional metrology; with critical dimensions (CD) of device reduce to sub-nanometer region. Optical metrology has proved its capability to precisely detect intricate details on the complex structures, however, conventional RCWA-based (rigorous coupled wave analysis) scatterometry has the limitations of long time-to-results and lack of flexibility to adapt to wide process variations. Signal Response Metrology (SRM) is a new metrology technique targeted to alleviate the consumption of engineering and computation resources by eliminating geometric/dispersion modeling and spectral simulation from the workflow. This is achieved by directly correlating the spectra acquired from a set of wafers with known process variations encoded. In SPIE 2015, we presented the results of SRM application in lithography metrology and control [1], accomplished the mission of setting up a new measurement recipe of focus/dose monitoring in hours. This work will demonstrate our recent field exploration of SRM implementation in 20nm technology and beyond, including focus metrology for scanner control; post etch geometric profile measurement, and actual device profile metrology.

Signal response metrology (SRM): a new approach for lithography metrology

CD uniformity requirements at 20nm and more advanced nodes have challenged the precision limits of CD-SEM metrology, conventionally used for scanner qualification and in-line focus/dose monitoring on product wafers. Optical CD metrology has consequently gained adoption for these applications because of its superior precision, but has been limited adopted, due to challenges with long time-to-results and robustness to process variation. Both of these challenges are due to the limitations imposed by geometric modeling of the photoresist (PR) profile as required by conventional RCWA-based scatterometry. Signal Response Metrology (SRM) is a new technique that obviates the need for geometric modeling by directly correlating focus, dose, and CD to the spectral response of a scatterometry tool. Consequently, it suggests superior accuracy and robustness to process variation for focus/dose monitoring, as well as reducing the time to set up a new measurement recipe from days to hours. This work describes the fundamental concepts of SRM and the results of its application to lithography metrology and control. These results include time to results and measurement performance data on Focus, Dose and CD measurements performed on real devices and on design rule metrology targets.

In-cell overlay metrology by using optical metrology tool

Overlay is one of the most critical process control steps of semiconductor manufacturing technology. A typical advanced scheme includes an overlay feedback loop based on after litho optical imaging overlay metrology on scribeline targets. The after litho control loop typically involves high frequency sampling: every lot or nearly every lot. An after etch overlay metrology step is often included, at a lower sampling frequency, in order to characterize and compensate for bias. The after etch metrology step often involves CD-SEM metrology, in this case in-cell and ondevice. This work explores an alternative approach using spectroscopic ellipsometry (SE) metrology and a machine learning analysis technique. Advanced 1x nm DRAM wafers were prepared, including both nominal (POR) wafers with mean overlay offsets, as well as DOE wafers with intentional across wafer overlay modulation. After litho metrology was measured using optical imaging metrology, as well as after etch metrology using both SE and CD-SEM for comparison. We investigate 2 types of machine learning techniques with SE data: model-less and model-based, showing excellent performance for after etch in-cell on-device overlay metrology.