Stuart A. Lanham

Development of specific collagen scaffolds to support the osteogenic and chondrogenic differentiation of human bone marrow stromal cells

Type I Collagen matrices of defined porosity, incorporating carbonate substituted hydroxyapatite (HA) crystals, were assessed for their ability to support osteo- and chondrogenic differentiation of human bone marrow stromal cells (HBMSCs). Collagen-HA composite scaffolds supported the osteogenic differentiation of HBMSCs both in vitro and in vivo as demonstrated by histological and micro-CT analyses indicating the extensive penetration of alkaline phosphatase expressing cells and new matrix synthesis with localised areas immunologically positive for osteocalcin. In vivo, extensive new osteoid formation of implant origin was observed in the areas of vasculature. Chondrogenic matrix synthesis was evidenced in the peripheral regions of pure collagen systems by an abundance of Sox9 expressing chondrocytes embedded within a proteoglycan and collagen II rich ECM. The introduction of microchannels to the scaffold architecture was seen to enhance chondrogenesis. Tissue specific gene expression and corresponding matrix synthesis indicate that collagen matrices support the growth and differentiation of HBMSCs and suggest the potential of this platform for understanding the ECM cues necessary for osteogenesis and chondrogenesis.

Augmentation of skeletal tissue formation in impaction bone grafting using vaterite microsphere biocomposites

The development of particulate bone void fillers with added biological function to augment skeletal tissue formation will lead to improved efficacy in bone replacement surgery. We demonstrate the potential for vaterite microsphere biocomposites to augment bone matrix formation within an in vivo model for impaction bone grafting seeded with human bone marrow stromal cells. In vitro tests demonstrate the significance of vaterite microspheres in the activation and promotion of 3D skeletal tissue formation. Further in vitro experiments using functionalized microspheres with surface integrated RGD peptide activate co-cultured skeletal populations in pellets and promote secretion of extracellular matrix collagens and human osteocalcin. Specific temporal release of entrapped RNase A was successfully demonstrated using these specialized microspheres with integrated magnetic beads, which physically disrupted the inorganic macrostructure. These studies demonstrate that bio-inspired calcium carbonate microspheres augment in vivo bone formation in impaction bone grafting. Such microspheres with added biological functionality offer innovative therapeutic approaches to activate skeletal populations and enhance bone formation with reparative implications for hard tissues.

From bench to clinic and back: skeletal stem cells and impaction bone grafting for regeneration of bone defects

Tissue engineering offers enormous potential for bone regeneration. Despite extensive in vitro and in vivo work, few strategies translate into clinical practice. This paper describes the combination of skeletal stem cells (SSCs) and impaction bone grafting (IBG) for the treatment of patients with bone defects associated with avascular necrosis of the femoral head. SSCs and milled allograft were impacted into necrotic bone in the femoral heads of four patients. Three patients remained asymptomatic at 22–44 month follow‐up, but one patient has required total hip replacement (both hips). This has allowed retrieval of the femoral heads, which were analysed structurally and functionally by μCT, histology and mechanical testing. A central channel of impacted bone was found in the femoral heads, which displayed a mature trabecular micro‐architecture. The impacted bone was denser than the surrounding trabecular bone, as strong in compression and with histological micro‐architecture comparable to that of trabecular bone. Analysis of the retrieved femoral head samples has demonstrated that this tissue‐engineering strategy regenerates bone that is both structurally and functionally analogous to normal trabecular bone. SSCs, together with IBG, have proved an effective treatment for avascular necrosis of the femoral head and offer significant potential for the broader spectrum of bone defects. Copyright

Effects of hypothyroidism on the structure and mechanical properties of bone in the ovine fetus

Thyroid hormones are important for normal bone growth and development in postnatal life. However, little is known about the role of thyroid hormones in the control of bone development in the fetus. Using computed tomography and mechanical testing, the structure and strength of metatarsal bones were measured in sheep fetuses in which thyroid hormone levels were altered by thyroidectomy or adrenalectomy. In intact fetuses, plasma concentrations of total calcium and the degradation products of C-terminal telopeptides of type I collagen increased between 100 and 144 days of gestation (term 145±2 days), in association with various indices of bone growth and development. Thyroid hormone deficiency induced by thyroidectomy at 105-110 days of gestation caused growth retardation of the fetus and significant changes in metatarsal bone structure and strength when analyzed at both 130 and 144 days of gestation. In hypothyroid fetuses, trabecular bone was stronger with thicker, more closely spaced trabeculae, despite lower bone mineral density. Plasma osteocalcin was reduced by fetal thyroidectomy. Removal of the fetal adrenal gland at 115-120 days of gestation, and prevention of the prepartum rises in cortisol and triiodothyronine, had no effect on bodyweight, limb lengths, metatarsal bone structure or strength, or circulating markers of bone metabolism in the fetuses studied near term. This study demonstrates that hypothyroidism in utero has significant effects on the structure and strength of bone, with different consequences for cortical and trabecular bone.

A tissue engineering strategy for the treatment of avascular necrosis of the femoral head

Background & purpose Skeletal stem cells (SSCs) and impaction bone grafting (IBG) can be combined to produce a mechanically stable living bone composite. This novel strategy has been translated to the treatment of avascular necrosis of the femoral head. Surgical technique, clinical follow-up and retrieval analysis data of this translational case series is presented. Methods SSCs and milled allograft were impacted into necrotic bone in five femoral heads of four patients. Cell viability was confirmed by parallel in vitro culture of the cell-graft constructs. Patient follow-up was by serial clinical and radiological examination. Tissue engineered bone was retrieved from two retrieved femoral heads and was analysed by histology, microcomputed tomography (μCT) and mechanical testing. Results Three patients remain asymptomatic at 22- to 44-month follow-up. One patient (both hips) required total hip replacement due to widespread residual necrosis. Retrieved tissue engineered bone demonstrated a mature trabecular micro-architecture histologically and on μCT. Bone density and axial compression strength were comparable to trabecular bone. Conclusions Clinical follow-up shows this to be an effective new treatment for focal early stage avascular necrosis of the femoral head. Unique retrieval analysis of clinically translated tissue engineered bone has demonstrated regeneration of tissue that is both structurally and functionally analogous to normal trabecular bone.

Taking tissue engineering principles into theatre: retrieval analysis from a clinically translated case

AIM Tissue engineering has enormous potential for the regeneration of bone defects. Approximately 4 years ago we reported on a 62 year old patient who underwent treatment of a benign cyst in the proximal femur by impaction bone grafting supplemented with autologous bone marrow. The cyst and symptoms subsequently recurred and this patient has now required a total hip replacement. This has provided a rare opportunity for ex vivo analysis of clinically applied tissue engineered bone. MATERIALS & METHODS The femoral head was retrieved at surgery and the structural and functional characteristics of the tissue engineered bone were analyzed by micro-computed tomography, histology and mechanical testing. RESULTS The impacted bone demonstrated a trabecular structure that contained islands of nonincorporated graft. The graft was denser than the patients trabecular bone with comparable strength. The cyst material had penetrated along the channel of bone and an increased number of osteoclasts were observed. DISCUSSION This study has provided detailed ex vivo analysis of retrieved human tissue engineered bone and possible reasons for the observed construct failure are discussed in this article. The impacted bone displayed some evidence of remodeled trabecular structure, although the bone marrow aspirate that was initially combined with the allograft contained a relatively low concentration of osteoprogenitor cells. Cellular augmentation was insufficient to overcome the osteoclastic process associated with renewed cyst formation. Concentration or culture expansion of osteoprogenitor cells from aspirated bone marrow is recommended for biological augmentation of bone graft.

The effect of porosity of a biphasic ceramic scaffold on human skeletal stem cell growth and differentiation in vivo.

Skeletal stem cell (SSC) growth on a novel porous HA/TCP scaffold has been investigated in vivo. The effect of porosity on osteogenic differentiation was assessed by comparing two groups of scaffolds with differing porosity but controlled pore size. Histology, microCT, scanning electron microscopy, and biochemical analysis were used to assess SSC proliferation and differentiation. The 45 pores per inch (ppi) scaffold demonstrated a greater increase in density than the 30 ppi scaffold following in vivo culture, and a reduction in dimensions of the pores and channels of the higher porosity scaffold was observed, indicating generation of new tissue within the pores. All scaffolds supported SSC proliferation but the higher scaffold porosity augmented osteogenic differentiation. ALP specific activity was enhanced on the 45 ppi scaffold compared to the 30 ppi scaffold. These studies demonstrate the importance of porosity in scaffold design and impact therein for tissue engineering application.

The scale-up of a tissue engineered porous hydroxyapatite polymer composite scaffold for use in bone repair: An ovine femoral condyle defect study

The development of an osteogenic bone graft substitute has important practical and cost implications in many branches of medicine where bone regeneration is required. Previous in vitro and small animal (murine) in vivo studies highlighted a porous hydroxyapatite/poly (DL-lactic acid) composite scaffold in combination with skeletal stem cells (SSCs) as a potential bone graft substitute candidate. The aim of the current study was to scale up the bone cell-scaffold construct to large animals and examine the potential for repair of a critical-sized defect via an ovine model. SSC seeded scaffolds (and unseeded scaffold controls) were implanted bilaterally into ovine femoral condyle critical defects for 3 months. A parallel in vitro analysis of ovine SSC seeded scaffolds was also performed. Post mortem mechanical indentation testing showed the bone strengths of the defect sites were 20% (controls) and 11% (SSC seeded scaffolds) those of normal cancellous bone (p < 0.01). MicroCT analysis demonstrated new bone formation within all defects with a mean increase of 13.4% in the control scaffolds over the SSC seeded scaffolds (p = 0.14). Histological examination confirmed these findings, with enhanced quality new bone within the control defects. This study highlights important issues and steps to overcome in scale-up and translation of tissue engineered products. The scaffold demonstrated encouraging results as an osteoconductive matrix; however, further work is required with cellular protocols before any human trials.

An analysis of polymer type and chain length for use as a biological composite graft extender in impaction bone grafting: a mechanical and biocompatibility study

Impaction bone grafting (IBG) with human allograft remains the preferred approach for replacement of lost bone stock during revision hip surgery. Associated problems include cost, disease transmission, and stem subsidence. Synthetic grafts are therefore appealing, and ideally display similar mechanical characteristics as allograft, but with enhanced ability to form de novo bone. High and low molecular weight forms of three different polymers [poly(DL-lactide) (P(DL) LA), poly(DL-lactide-co-glycolide) (P(DL) LGA), and poly(ε-caprolactone) (PCL)] were milled, impacted into discs, and then examined in a shear testing rig, in comparison to allograft. In addition, skeletal stem cells (SSCs) were combined with each of the milled polymers, followed by impaction and examination for cell viability and number, via fluorostaining and biochemical assays. The shear strengths of high/low mwt P(DL) LA, and high/low mwt P(DL) LGA were significantly higher than allograft (p < 0.01). High/low mwt PCL had significantly lower shear strengths (p < 0.01). WST-1 assay and fluorstaining indicated significantly increased cell viability on high mwt P(DL) LA and high mwt P(DL) LGA over allograft (p < 0.05). Mechanical and biochemical analysis indicated improved properties of high mwt P(DL) LA and high mwt P(DL) LGA over allograft. This study indicates the potential of these polymers for use as substitute human allograft, creating a living composition with SSC for application in IBG.

Effect of a low-protein diet during pregnancy on expression of genes involved in cardiac hypertrophy in fetal and adult mouse offspring.

Gene markers for cardiomyocyte growth, proliferation and remodeling were examined in mouse fetuses and adult male offspring exposed to maternal low-protein (LP) diet during pregnancy. Whole heart volume, measured by magnetic resonance imaging, was smaller in day 15 LP fetuses v. those from chow-fed dams (C), whereas heart volume was greater in adult LP v. C offspring. These LP offspring were hypertensive and had larger cardiomyocytes v. C animals. The mRNA levels of cyclin G1, a marker for cell growth, were lower in LP fetal hearts v. C hearts, but similar in the left ventricle of adult LP and C offspring. Opposite trends were found in brain natriuretic peptide levels (a marker of cardiac hypertrophy). Thus, maternal LP during pregnancy results in smaller fetal hearts and is accompanied by changes in expression of genes involved in cardiomyocyte growth, which are associated with cardiac hypertrophy and hypertension in adulthood.