Sujith Nair

Preparation of biocatalytic nanofibres with high activity and stability via enzyme aggregate coating on polymer nanofibres.

We have developed a unique approach for the fabrication of enzyme aggregate coatings on the surfaces of electrospun polymer nanofibres. This approach employs covalent attachment of seed enzymes onto nanofibres consisting of a mixture of polystyrene and poly(styrene-co-maleic anhydride), followed by a glutaraldehyde (GA) treatment that cross-links additional enzyme molecules and aggregates from the solution onto the covalently attached seed enzyme molecules. These cross-linked enzyme aggregates, covalently attached to the nanofibres via the linkers of seed enzyme molecules, are expected to improve the enzyme activity due to increased enzyme loading, and also the enzyme stability. To demonstrate the principle, we coated α-chymotrypsin (CT) on nanofibres electrospun from a mixture of polystyrene and poly(styrene-co-maleic anhydride). The initial activity of CT-aggregate-coated nanofibres was nine times higher than nanofibres with just a layer of covalently attached CT molecules. The enzyme stability of CT-aggregate-coated nanofibres was greatly improved with essentially no measurable loss of activity over a month of observation under rigorous shaking conditions. This new approach of enzyme coating on nanofibres, yielding high activity and stability, creates a useful new biocatalytic immobilized enzyme system with potential applications in bioconversion, bioremediation, and biosensors.

Highly stable trypsin-aggregate coatings on polymer nanofibers for repeated protein digestion

A stable and robust trypsin‐based biocatalytic system was developed and demonstrated for proteomic applications. The system utilizes polymer nanofibers coated with trypsin aggregates for immobilized protease digestions. After covalently attaching an initial layer of trypsin to the polymer nanofibers, highly concentrated trypsin molecules are crosslinked to the layered trypsin by way of a glutaraldehyde treatment. This process produced a 300‐fold increase in trypsin activity compared with a conventional method for covalent trypsin immobilization, and proved to be robust in that it still maintained a high level of activity after a year of repeated recycling. This highly stable form of immobilized trypsin was resistant to autolysis, enabling repeated digestions of BSA over 40 days and successful peptide identification by LC‐MS/MS. This active and stable form of immobilized trypsin was successfully employed in the digestion of yeast proteome extract with high reproducibility and within shorter time than conventional protein digestion using solution phase trypsin. Finally, the immobilized trypsin was resistant to proteolysis when exposed to other enzymes (i.e., chymotrypsin), which makes it suitable for use in “real‐world” proteomic applications. Overall, the biocatalytic nanofibers with trypsin aggregate coatings proved to be an effective approach for repeated and automated protein digestion in proteomic analyses.

Highly stable enzyme precipitate coatings and their electrochemical applications.

This paper describes highly stable enzyme precipitate coatings (EPCs) on electrospun polymer nanofibers and carbon nanotubes (CNTs), and their potential applications in the development of highly sensitive biosensors and high-powered biofuel cells. EPCs of glucose oxidase (GOx) were prepared by precipitating GOx molecules in the presence of ammonium sulfate, then cross-linking the precipitated GOx aggregates on covalently attached enzyme molecules on the surface of nanomaterials. EPCs-GOx not only improved enzyme loading, but also retained high enzyme stability. For example, EPC-GOx on CNTs showed a 50 times higher activity per unit weight of CNTs than the conventional approach of covalent attachment, and its initial activity was maintained with negligible loss for 200 days. EPC-GOx on CNTs was entrapped by Nafion to prepare enzyme electrodes for glucose sensors and biofuel cells. The EPC-GOx electrode showed a higher sensitivity and a lower detection limit than an electrode prepared with covalently attached GOx (CA-GOx). The CA-GOx electrode showed an 80% drop in sensitivity after thermal treatment at 50°C for 4 h, while the EPC-GOx electrode maintained its high sensitivity with negligible decrease under the same conditions. The use of EPC-GOx as the anode of a biofuel cell improved the power density, which was also stable even after thermal treatment of the enzyme anode at 50°C. The excellent stability of the EPC-GOx electrode together with its high current output create new potential for the practical applications of enzyme-based glucose sensors and biofuel cells.

Fabrication of electrically-conducting nonwoven porous mats of polystyrene–polypyrrole core–shell nanofibers viaelectrospinning and vapor phase polymerization

This paper describes the growth of polypyrrole (PPy) layers over polystyrene (PS) nanofibers via a vapor phase polymerization process. PS nanofibers were produced through electrospinning of PS solutions containing chemical oxidants capable of polymerizing pyrrole monomers. The electrospun PS nanofibers provided a robust and stable template for growth of conducting polymer nonwoven porous mats. A mixture of tetrahydrofuran, acetone, and butanol was able to dissolve both hydrophobic PS and ionic salts (oxidants). Two chemical oxidants widely used in PPy synthesis – ferric chloride and ferric tosylate – were compared. Upon exposure to pyrrole vapor, both oxidants produced PPy conducting polymers over PS nanofibers. The ferric tosylate containing template fibers showed much faster PPy growth kinetics than the ferric chloride containing fibers. The PPy growth on ferric tosylate containing template fibers produced highly faceted fibers and gave a higher degree of crystallization of PPy than the PPy grown with ferric chloride containing templates. The intrinsic doping of PPy was slightly higher in the PPy layers grown with ferric tosylate. The combination of higher degrees of crystallization and doping resulted in a higher conductivity for PS–PPy nanofiber mats produced with ferric tosylate than those produced with ferric chloride.