Sumit Bahl

The importance of crystallographic texture in the use of titanium as an orthopedic biomaterial

Crystallographic texture is perceived to play an important role in controlling material properties. However, the influence of texture in modulating the properties of biomedical materials has not been well investigated. In this work, commercially pure titanium (cp-Ti) was processed through six different routes to generate a variety of textures. The effect of texture on mechanical properties, corrosion behavior, cell proliferation and osteogenesis was characterized for potential use in orthopedic applications. The presence of closely packed, low-energy crystallographic planes at the material surface was influenced by the volume fraction of the components in the overall texture, thereby influencing surface energy and corrosion behavior. Texture modulated osteoblast proliferation through variations in surface water wettability. It also affected mineralization by possibly influencing the coherency between the substrate and calcium phosphate deposits. This study demonstrates that crystallographic texture can be an important tool in improving the properties of biomaterials to achieve the enhanced performance of biomedical implants.

The control of crystallographic texture in the use of magnesium as a resorbable biomaterial

Magnesium and its alloys are an emerging class of resorbable materials for orthopedic and cardiovascular applications. The typical strategy underlying the development of these materials involves the control of material processing routes and the addition of alloying elements. Crystallographic texture is known to control bulk mechanical as well as surface properties. However, its role in determining the properties of magnesium for implant materials has not been well studied. In this work, an extruded rod of pure magnesium was cut in multiple directions to generate samples with different textures. It was found that texture significantly affected the strength and ductility of magnesium. Corrosion rates in Hanks solution decreased with the increased presence of low energy basal planes at the surface. In vitro cell studies revealed that changes in texture did not induce cytotoxicity. Thus, the control of texture in magnesium based implants could be used to tailor the mechanical properties and the resorption rates without compromising cytocompatibility. This study elucidates the importance of texture in the use of magnesium as a resorbable biomaterial.

Engineering the Next-Generation Tin Containing β Titanium Alloys with High Strength and Low Modulus for Orthopedic Applications

Metastable β Ti alloys are the new emerging class of biomaterial for load bearing orthopedic applications. However, these alloys in the single β phase microstructure have insufficient strength for use in load bearing applications. It is imperative to strengthen these alloys by carefully designed thermo-mechanical processing routes that typically involve aging treatment. In this investigation two newly designed Sn based β Ti alloys of composition Ti-32Nb-(2, 4) Sn are evaluated. The effects of Sn content on the mechanical properties and biological performance of these alloys processed through designed thermo-mechanical processing route are investigated. The increase in the Sn content led to a reduction in the elastic modulus of the alloy. An increase in the Sn content increased the aspect ratio of the α precipitates, which led to a significant strengthening in the alloy while keeping the elastic modulus low. In addition, the corrosion behavior of the alloy was evaluated in simulated body fluid. The Sn containing β alloys have an excellent corrosion resistance as desired for an implant material. The corrosion resistance improved with an increase in Sn content. These alloys were also observed to have excellent cytocompatibility as they not only supported the attachment and proliferation of human mesenchymal stem cells but also their osteogenic differentiation in vitro. The combination of high strength, low elastic modulus, superior corrosion resistance and biocompatibility underscores the promise of Sn containing β Ti alloys for use in orthopedic applications.

Processing–Microstructure–Crystallographic Texture–Surface Property Relationships in Friction Stir Processing of Titanium

Friction stir processing (FSP) is a solid-state technique for microstructural modification of metallic materials. The aim of this work is to establish processing–microstructure–texture–surface properties relationship in commercially pure titanium (cp-Ti) processed by FSP under different processing conditions. The effect of processing conditions on the microstructural changes and the evolution of crystallographic texture is systematically studied. The changes in the chemical composition of the passive surface layer are characterized by x-ray photoelectron spectroscopy. The corrosion behavior of cp-Ti after FSP is evaluated in simulated body fluid and is related to the microstructure, texture and composition of passive layer. Substantial grain refinement was observed after FSP. Shear type deformation texture evolved during FSP with dynamic restoration processes weakening the overall shear texture. The corrosion resistance improved after processing at lower rotational speed due to the presence of basal planes at the surface and the incorporation of TiN in the passive layer. The results of this study suggest that surface properties of cp-Ti like passive layer and corrosion resistance are altered by FSP and can be controlled using appropriate processing parameters.

Establishing the microstructure-strengthening correlation in severely deformed surface of titanium

ABSTRACT Surface nanostructuring of engineering materials can be utilised to enhance materials performance for various applications. The aim of this work was to investigate the evolution of microstructure and its correlation with strengthening mechanisms in nanocrystalline commercially pure titanium (cp-Ti) produced by surface mechanical attrition treatment (SMAT). The individual contributions of dislocation slip and twining as the deformation mechanisms during SMAT have been quantified using X-ray line profile analysis and corroborated with transmission electron microscopy and electron backscattered diffraction techniques. It is found that twining is operative only in the early stages of deformation. The absence of twin–twin intersections suggests that twining is not directly responsible for the initial refinement of grain size. Dislocation slip is the major deformation mode, which leads to the refinement of the microstructure by forming low-angle lamellar boundaries. Continuous dynamic recrystallisation is demonstrated to be the mechanism of nanocrystallisation in cp-Ti using detailed microscopic analysis. In contrast to previous studies, which have neglected the contribution of Taylor strengthening, it is observed that a combination of Hall–Petch and Taylor relationships can explain the strength only if separate set of parameters K (Hall–Petch constant) and α (geometrical factor in Taylor relationship) are used for the nanocrystalline surface and severely deformed sub-surface of cp-Ti. Taken together, this work provides new insights into the underlying mechanisms for engineering nanocrystalline materials.