Sun-Hang Cho

Controlled Release of Tamsulosin from Nanopore-Forming Granules

Tamsulosin or a salt thereof such as its hydrochloride salt has been known to have an adrenaline receptor blocking action for urethra and prostate areas. It has been widely used as a drug which lowers the prostate pressure and improves urinary disturbance accompanied by prostate-grand enlargement, thus for the treatment of prostatic hyperplasia. To avoid dose-dependent side effects of tamsulosin upon oral administration, the development of sustained-release delivery system is essentially required, that can maintain therapeutic drug levels for a longer period of time. The aim of this study was therefore to formulate sustained-release tamsulosin granules and assess their formulation variables. We designed entric coated sustained-release tamsulosin granules for this purpose. Nano-pores in the outer controlled release membrane were needed in order to obtain initial tamsulosin release even in an acidic environment such as gastric region. In our sustained release osmotic granule system, hydroxypropylmethylcellulose in a drug-containing layer was used as a rate controller. The drug-containing granules were coated with hydroxypropylmethylcellulose phthalate (HPMCP) and Eudragit, along with glycerol triacetate as an aqueous nano-pore former. The release of tamsulosin depended heavily on the type of Eudragit such as RS, RL, NE 30D, used in the formulation of controlled release layer. These results obtained clearly suggest that the sustained-release oral delivery system for tamsulosin could be designed with satisfying drug release profile approved by the Korean Food and Drug Administration.

Preparation and Characterization of Liquefied Ibuprofen Using Self-Microemulsion Drug Delivery System (SMEDDS)

Ibuprofen (IBU), is a non-steroidal anti-inflammatory drug, used to treat rheumatoid arthritis, removal of fever and mild to moderate pain. Because of small dosage and very low accumulation in the body, IBU has been used to heal childrens fever. However, IBU was very low solubility in a low pH and water (in water mg/ml). A nanoemulsion containing IBU by means of self-microemulsion drug delver system (SMEDDS) was prepared in order to enhance the solubility of IBU. The SMEDDS was composed of cosurfactant, oil and surfactant The solubility of IBU in various components such as cosurfactant, oil and surfactant was examined. as a cosurfactant, M1944CS as an oil and RH-40 as a surfactant were used in this study for preparing SMEDDS. Optimized formulation of SMEDDS was obtained by phase diagram which express the section of nanoemulsion formation. The SMEDDS containing IBU had higher dissolution rate than conventional IBU sirups. Thus the SMEDDS was a potential candidate of stable conventional and effective oral dosage form for IBU.

Preparation and In Vitro Test of Sold Dispersion using Acyclovir and Water Soluble Polymer

Acyclovir(ACV) is an important antiviral drug used extensively against infections caused by herpes viruses, especially herpes simplex and varicella zoster. Because of high crystallinity and large particle size, solubility of intact ACV is very low in water(1.3 mg/ml). The goal of this work is to enhance the solubility of ACV. To make solid dispersion, Polyethyleneglycol, Hydroxyprophylmethylcelluose and Polyvinylpyrrolidone were used as polymer carriers in this work. Polymer carriers and drug were dissolved in acetic acid. And then spray drying method and freeze drying method were used as solvent extraction. Morphology, crystallization and functional group were characterized using SEM, XRD and FT-IR. The result of in vitro test showed the sample using PVP as polymer carrier had higher dissolution rate(up to 466%) than intact ACV.

Pharmacokinetic Evaluation and Gastric Ulcer Symptoms comparison of Ketorolac Tromethamine Sustained-Release Pellets after Oral Administration in Beagle Dogs

Ketrorolac tromethamine (KT), a nonsteroidal anti-inflammatory drug (NSAID) is required repeated administration due to its short blood half-life. To avoid dose-dependent side effects of KT, sustained-release pellets containing KT were prepared by coating with Eudragit RS 100 and Eudragit NE 30D. The in vitro and in vivo drug release behavior of KT from Eudragit RS 100 and NE 30D coated pellet (SR-A), Eudragit RS 100 coated pellet (SR-B) and conventional commercial immediate-release tablet (IR) was investigated. KT from SR-A and SR-B was slowly released over several hours, whereas IR showed rapid initial release in vitro. The pharmacokinetic study in vivo was performed by oral administration in beagle dogs. 5 mg IR was administered 3 times at intervals 5 hr. Five milligrams of IR was administered 3 times at intervals of 5 hr and 15 mg of SR-A and SR-B did once. After administering IR, KT concentration in blood showed high peak- trough fluctuation and stomach ulcer were discovered. On the other hand, SR-A and SR-B sustainedly released KT and reduced the occurrence of stomach ulcer. There sustained-release pellets will be effective system to minimize dosedependent of side effect and improve patient compliance.

Physical properties and intracellular uptake of polyethyleneglycol-incorporated cationic liposomes

Liposomes as one of the efficient drug carriers have some shortcomings such as their short circulation time, fast clearance from human body by reticuloendothelial system (RES) and limited intracellular uptake to target cell. In this study, polyethylenglycol (PEG)-incorporated cationic liposomes were prepared by ionic complexation of positively charged liposomes with carboxylated polyethyleneglycol (mPEG-COOH). The cationic liposomes had approximately of mean particle diameter and of zeta potential value. The PEG-incorporated cationic liposomes had of mean particle diameter with an increase of about 10 nm compared to the cationic liposomes. Zeta potential value of them was indicating 30mV decrease of cationic charge compared to the cationic liposomes. The amount of PEG which was incorporated onto the cationic liposomes was assayed by using picrate assay method and the incorporation efficiency was . Loading efficiency of model drug, doxorubicin, into cationic liposomes or PEG-incorporated cationic liposomes was about . Results of intracellular uptake which were evaluated by flow cytometry analysis of doxorubicin loaded liposomes showed that intracellular uptake of PEG-incorporated cationic liposomes was higher than the cationic liposomes or DSPE-mPEG liposomes. In addition, cytotoxicity of PEG-incorporated cationic liposomes was comparable to cationic liposomes. Consequently, the PEG-incorporated cationic liposomes of which surface was incorporated with PEG by ionic complex may be applicable as anticancer drug carriers that can increase therapeutic efficacy.

Preparation and Dissolution Characteristics of Sustained Release Granules Containing Indapamide

Indapamide (4-chloro-N-(2-methyl-1-indolinyl)-3-sulfamoyl-benz-amide) is an oral antihypertensive diuretic agent indicated for the treatment of hypertensive. The diuretic and natriuretic effects are mainly due to the structure of o-chlorobenzenesulfonamide. The objective of this study was to formulate sustained release indapamide granules and assess their formulation variables. Granules were prepared by fluid bed coating method and consist of drug layer and membrane layer. The granules were coated with HPC and ethyl cellulose along with plasticizer dibuthyl sebacate. The release of indapamide depended on the type of Eudragit such as RS and NE 30 D used in the formulation controlled release layer. These results obtained clearly suggest that the sustained release oral delivery system for indapamide could be designed with satisfying drug release profile approved.

Formulation and Preparation of Sustained Release Pellet for Alfuzosin HCI Using Fluid-bed coater

Alfuzosin, an Alphal-adrenoceptor antagonist is used for the treatment of patients with voiding and in a lesser extent storage lower urinary tract symptoms (LUTS) associated to benign prostatic hyperplasia (BPH). The objective of this study was to formulate sustained release alfuzosin HCl granules and assess their formulation variables. The as a polymer, sustained release membrane, and dibutyl sebacate (DBS) as a plasticizer were used. Multi-coated alfuzosin HCl delivery systems composed of sugar sphere, various excipients, and HPMC (hydroxy propyl methyl cellulose), Cellulose Acetate were prepared by fluid-bed coater. Membrane layer were used RS PO and NE 30D. And the alfuzosin HCl coated beads were coated immediate release drug layer for initial burst. Its dissolution test was carried out compared to conventional products ( XL). The release rate of drug from coated beads was higher than that from XL in pH 6.8.

Formulation of Sustained Release Granule for Venlafaxine-HCl Using Water-Insoluble Polymer

Venlafaxine, 1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl] cyclohexanol hydrochloride is a novel, nontricyclic antidepressant. venlafaxine is a unique antidepressant that differs structurally from other currently available. The aim ot the study was to formulate sustained-release venlafaxine granules and assess their formulation variables. It consists of two layers, venlafaxine drug layer and sustained release coating layer and manufactured by fluidized bed process. The sustained release of drug could be increased by double-control rising various components in venlafaxine drug layer and sustained-release layer. The drug-containing granules were coated with cellulose acetate, cetyl alcohol and Eudragit RS along with plastisizer such as dibuthyl sebacate as an nano-pore former The release oi venlafaxine depended on the type of Eudragit such as RS, and RL used in the formulation of controlled release layer. These results obtained clearly suggest that the sustained release oral delivery system for venlafaxine could be designed with satisfying drug release profile approved.

The Effect of Enhancer on the Penetration of Indapamide through Hairless Mouse Skin

The chemical formula of indapamide is 3-(aminosulfonyl)-4-chloro-N-(2,3-dihydro-2-methyl-1H-indol-l-yl)-benzamide, Indapamide is an oral antipertensive diuretic agent indicated for the treatment of hypertensive and edema. Indapamide inhibits carbonic anhydrase enzyme. Transdermal drug delivery systems, as compared to their corresponding classical oral or injectable dosage form counterparts, offer many advantages. The most important advantages are improved systemic bioavailability of the pharmaceutical active ingredients (PAI), because the first-pass metabolism by the liver and digestive system are avoided; and the controlled, constant drug delivery profile (that is, controlled zero-order absorption). Also of importance is the reduced dose frequency compared to the conventional oral dosage forms (that is, once-a-day, twice-a-week or once-a-week). Other benefits include longer duration of therapeutic action from a single application, and reversible action. For example, patches can be removed to reverse any adverse effects that may be caused by overdosing. In order to evaluate the effects of vehicles and penetration enhancers on skin permeation of Indapamide, the skin permeation rates of Indapamide from vehicles of different composition were determined using Franz cells fitted with excised hairless skins. Solubility of Indapamide in various solvents was investigated to select a vehicle suitable for the percutaneous absorption of Indapamide, The solvents used were Tween80, Tween20, Labrasol, Lauroglycol90 (LG90) and Peceol. Lauroglycol90 increase the permeability of indapamide approximately 3.75-fold compared with the control. Tween80, Tween20, Labrasol, Lauroglycol90 (LG90) and Peceol showed flux of , respectively.

Effect of Types and Mixing Ratios of Water-Soluble Polymers on In Vitro Release Profile of Sold Dispersion for Acyclovir

Acyclovir (ACV) is one of the most effective and selective agents against viruses of the herpes group. Because of low solubility, bioavailability of ACV has shown below 30% with oral dosage form. In our previous study, we reported that the fabrication of solid dispersion of ACV was possible and the solid dispersion of ACV and PVP was the most useful in all samples. In this study, we examined the effect of mixture ratio of polymers (PEG and PVP) to ACV. Solubility of ACV was dramatically increased up to 25 mg/ml in distilled water. So water was used as a solvent to eliminate problem of residual solvent. Spray drying method was used for the solid dispersion of ACV as solvent extraction. Different scanning calorimeter was used to check degradation of drug. Polymer carriers were PEG 6,000 and PVP. In summary, ACV-PVP (1:3) showed the best solubility in distilled water.