Sunny Akogwu Abbah

Biological performance of a polycaprolactone-based scaffold used as fusion cage device in a large animal model of spinal reconstructive surgery.

A bioactive and bioresorbable scaffold fabricated from medical grade poly (epsilon-caprolactone) and incorporating 20% beta-tricalcium phosphate (mPCL-TCP) was recently developed for bone regeneration at load bearing sites. In the present study, we aimed to evaluate bone ingrowth into mPCL-TCP in a large animal model of lumbar interbody fusion. Six pigs underwent a 2-level (L3/4; L5/6) anterior lumbar interbody fusion (ALIF) implanted with mPCL-TCP + 0.6 mg rhBMP-2 as treatment group while four other pigs implanted with autogenous bone graft served as control. Computed tomographic scanning and histology revealed complete defect bridging in all (100%) specimen from the treatment group as early as 3 months. Histological evidence of continuing bone remodeling and maturation was observed at 6 months. In the control group, only partial bridging was observed at 3 months and only 50% of segments in this group showed complete defect bridging at 6 months. Furthermore, 25% of segments in the control group showed evidence of graft fracture, resorption and pseudoarthrosis. In contrast, no evidence of graft fractures, pseudoarthrosis or foreign body reaction was observed in the treatment group. These results reveal that mPCL-TCP scaffolds could act as bone graft substitutes by providing a suitable environment for bone regeneration in a dynamic load bearing setting such as in a porcine model of interbody spine fusion.

Fusion performance of low-dose recombinant human bone morphogenetic protein 2 and bone marrow-derived multipotent stromal cells in biodegradable scaffolds: a comparative study in a large animal model of anterior lumbar interbody fusion.

Study Design. A large animal study comparing interbody fusion of a bioresorbable scaffold loaded with either low-dose recombinant human bone morphogenetic protein 2 (rhBMP-2) or bone marrow-derived multipotent stromal cells (BMSCs). Objective. To compare the quality of fusion resulting from implantation of medical grade poly (&epsis;-caprolactone)-20% tricalcium phosphate (mPCL/TCP) scaffolds and two different bone growth stimulating agents. Summary of Background Data. Nondegradable cages have been used for interbody fusion with good results. However, the overall advantage of lifelong implantation of a nondegradable device remains a subject of ongoing debate. The use of bioresorbable scaffolds might offer superior alternatives. In this study, we evaluated the quality of fusion obtained with two potential bone graft substitutes. Methods. Eleven Yorkshire pigs underwent a bisegmental (L2/L3; L4/L5) anterior lumbar interbody fusion (ALIF) in four groups, namely: (1) mPCL/TCP + 0.6mg rhBMP-2; (2) mPCL/TCP + BMSCs; (3) mPCL/TCP (negative control); and (4) autologous bone grafts (positive control). Results. The mean radiographic scores at 9 months were 3.0, 1.7, 1.0, and 1.8 for groups 1 to 4, respectively. The bone volume fraction of group 1 was two-folds higher than group 2. Histology, micro-computed tomographic scanning and biomechanical evaluation demonstrated solid and comparable fusion between groups 1 and 4. However, group 2 showed inferior quality of fusion when compared with groups 1 and 4 while group 3 showed no fusion even at 9 months. In addition, there was no evidence of implant rejection, chronic inflammation or any other complications. Conclusion. mPCL/TCP scaffolds loaded with low-dose rhBMP-2 is comparable to autograft bone as a bone graft substitute in this large animal ALIF model. Although BMSCs lagged behind autograft bone and rhBMP-2, evidence of bone ingrowth in this group warrants further investigation. Our results suggest that mPCL/TCP scaffolds loaded with rhBMP-2 or BMSCs may be a viable alternative to conventional cages and autograft bone.

Silk Fibroin-Based Complex Particles with Bioactive Encrustation for Bone Morphogenetic Protein 2 Delivery

Application of bone morphogenetic protein 2 (BMP-2) currently faces its challenges, and its efficacy of delivery has to be improved. The proper dosage of the powerful bioactive molecule is still under discussion and needs to be investigated further. In this work, pure silk fibroin particles and particles with calcium carbonate encrustation (complex particles) are designed, developed, and functionalized by BMP-2. These are used to deliver the bioactive molecule to mesenchymal stem cells (MSCs) to induce osteogenic differentiation. Results are compared with those of control groups of BMP-2 carriers under the same condition. Silk fibroin-based particles with size and component variations are prepared by self-assembly, desolvation, and soft template formation to improve BMP-2 loading efficiency. Results show that the particles significantly enhance osteogenic differentiation of MSCs, which is evident in the high ALP enzyme activity as well as the increased level of expression of osteogenic genes. Specifically, the combination of calcium compound and BMP-2 in the silk fibroin-calcium carbonate complex particles synergistically enhances osteogenesis. Release tests and mathematical modeling are applied to describe BMP-2 dissolution profiles, and the release mechanism is based on diffusion and polymer chain relaxation. In summary, the particles show high efficacies of BMP-2 delivery, and introduction of the complex particle can progressively enhance osteogenesis.

Extracellular matrix stability of primary mammalian chondrocytes and intervertebral disc cells cultured in alginate-based microbead hydrogels.

Three-dimensional alginate constructs are widely used as carrier systems for transplantable cells. In the present study, we evaluated the chondrogenic matrix stability of primary rat chondrocytes and intervertebral disc (IVD) cells cultured in three different alginate-based microbead matrices to determine the influence of microenvironment on the cellular and metabolic behaviors of chondrogenic cells confined in alginate microbeads. Cells entrapped in calcium, strontium, or barium ion gelled microbeads were monitored with the live/dead dual fluorescent cell viability assay kit and the 1,9-dimethylmethylene blue (DMB) assay designed to evaluate sulfated glycosaminoglycan (s-GAG) production. Expression of chondrogenic extracellular matrix (ECM) synthesis was further evaluated by semiquantitative RT-PCR of sox9, type II collagen, and aggrecan mRNAs. Results indicate that Ca and Sr alginate maintained significantly higher population of living cells compared to Ba alginate (p < 0.05). Production of s-GAG was similarly higher in Ca and Sr alginate microbead cultures compared to Ba alginate microbeads. Although there was no significant difference between strontium and calcium up to day 14 of culture, Sr alginate showed remarkably improved cellular and metabolic activities on long-term cultures, with chondrocytes expressing as much as 31% and 44% greater s-GAG compared to calcium and barium constructs, respectively, while IVD cells expressed 63% and 74% greater s-GAG compared to calcium and barium constructs, respectively, on day 28. These findings indicate that Sr alginate represent a significant improvement over Ca- and Ba alginate microbeads for the maintenance of chondrogenic phenotype of primary chondrocytes and IVD cells.

Minimizing the severity of rhBMP-2-induced inflammation and heterotopic ossification with a polyelectrolyte carrier incorporating heparin on microbead templates.

Study Design. A rodent model of posterior spinal fusion. Objective. The aim of this study was to evaluate the efficacy of low-dose recombinant human bone morphogenetic protein-2 (rhBMP-2) delivered with a heparin based polylectrolyte complex (PEC) carrier in facilitating posterior spinal fusion while concurrently minimizing seroma and heterotopic ossification. Summary of Background Data. rhBMP-2 is being used to augment spinal fusion. However, complications such as heterotopic ossification and local soft tissue swellings have been reported. These are attributed to supraphysiological amount of rhBMP-2 and the poor modulation capacity of absorbable collagen sponge. Methods. Forty rats were randomized into 6 groups as follows. Group I: absorbable collagen sponge without rhBMP-2 (n = 4); group II: positive control, absorbable collagen sponge + 10 &mgr;g rhBMP-2 (n = 4); group III: alginate-(poly-L-lysine)-heparin (PEC) without rhBMP-2 (n = 8); group IV: PEC + 4.5 &mgr;g rhBMP-2 (n = 8); group V: PEC + 1.5 &mgr;g rhBMP-2 (n = 8); group VI: PEC + 0.5 &mgr;g rhBMP-2 (n = 8). Results. Between postoperative days 5 and 7, seroma was observed in all rhBMP-2 implanted groups irrespective of carrier and dose. However, the rate and size of seroma differed considerably. Although all animals (100%) in positive control group showed seroma, only one animal (12.5%) in group VI developed seroma at the implant site. The size of seroma in group VI was significantly smaller than that in positive control group. Micro-computed tomography evaluation revealed comparable mean fusion scores in all rhBMP-2 implanted groups. More importantly, although new bone was well contained within the cage in group VI, heterotopic ossification beyond the cage was observed in positive control group. Conclusion. A new carrier has demonstrated capacity to minimize seroma formation as well as heterotopic ossification associated with rhBMP-2 by reducing the efficacious dose needed for consistent fusion. The results of this study indicate that PEC alginate microbeads may represent a new opportunity to define an efficient rhBMP-2 carrier.

Bone-marrow derived mesenchymal stem cells assembled with low dose BMP-2 in a three dimensional hybrid construct enhances posterolateral spinal fusion in syngeneic rats.

BACKGROUND CONTEXT The combination of potent osteoinductive growth factor, functional osteoblastic cells, and osteoconductive materials to induce bone formation is a well-established concept in bone tissue engineering. However, supraphysiological dose of growth factor, such as recombinant human bone morphogenetic protein 2 (rhBMP-2), which is necessary in contemporary clinical application, have been reported to result in severe side effects. PURPOSE We hypothesize that the synergistic osteoinductive capacity of low-dose bone morphogenetic protein 2 (BMP-2) combined with undifferentiated bone marrow-derived stromal cells (BMSCs) is comparable to that of osteogenically differentiated BMSCs when used in a rodent model of posterolateral spinal fusion. STUDY DESIGN/SETTING A prospective study using a rodent model of posterolateral spinal fusion was carried out. PATIENT SAMPLE Thirty-six syngeneic Fischer rats comprised the patient sample. METHODS Six groups of implants were evaluated as follows (n=6): (1) 10 µg BMP-2 with undifferentiated BMSCs; (2) 10 µg BMP-2 with osteogenic-differentiated BMSCs; (3) 2.5 µg BMP-2 with undifferentiated BMSCs; (4) 2.5 µg BMP-2 with osteogenic-differentiated BMSCs; (5) 0.5 µg BMP-2 with undifferentiated BMSCs; and (6) 0.5 µg BMP-2 with osteogenic-differentiated BMSCs. Optimal in vitro osteogenic differentiation of BMSCs was determined by quantitative real-time polymerase chain reaction (qRT-PCR) gene analysis whereas in vivo bone formation capacity was evaluated by manual palpation, micro-computed tomography, and histology. RESULTS Rat BMSCs cultured in fibrin matrix that was loaded into the pores of medical-grade poly epsilon caprolactone tricalcium phosphate scaffolds differentiated toward osteogenic lineage by expressing osterix, runt-related transcription factor 2, and osteocalcium mRNA when supplemented with dexamethasone, ascorbic acid, and β-glycerophosphate. Whereas qRT-PCR revealed optimal increase in osteogenic genes expression after 7 days of in vitro culture, in vivo transplantation study showed that pre-differentiation of BMSCs before transplantation failed to promote posterolateral spinal fusion when co-delivered with low-dose BMP-2 (1/6 or 17% fusion rate). In contrast, combined delivery of undifferentiated BMSCs with low-dose BMP-2 (2.5 µg) demonstrated significantly higher fusion rate (4/6 or 67%) as well as significantly increased volume of new bone formation (p<.05). CONCLUSION In summary, this study supports the combination of undifferentiated BMSCs and low-dose rhBMP-2 for bone tissue engineering construct.

Sequestration of rhBMP-2 into self-assembled polyelectrolyte complexes promotes anatomic localization of new bone in a porcine model of spinal reconstructive surgery.

Efficient and therapeutically safe delivery of recombinant human bone morphogenetic protein 2 (rhBMP-2) continues to be a central issue in bone tissue engineering. Recent evidence indicates that layer-by-layer self-assembly of polyelectrolyte complexes (PECs) can be used to recreate synthetic matrix environments that would act as tuneable reservoirs for delicate biomolecules and cells. Although preliminary in vitro as well as small-animal in vivo studies support this premise, translation into clinically relevant bone defect volumes in larger animal models remains unreported. Here we explored the use of native heparin-based PEC, deposited on a hydrated alginate gel template, to load bioactive rhBMP-2 and to facilitate lumbar interbody spinal fusion in pigs. We observed that triple PEC deposits with the highest protein sequestration efficiency and immobilization capacity promoted higher volume of new bone formation when compared with single PEC with low sequestration efficiency and immobilization capacity. This also resulted in a significantly enhanced biomechanical stability of the fused spinal segment when compared with PEC carriers with relatively low protein sequestration and immobilization capacities (p<0.05). Most importantly, PEC carriers showed a more orderly pattern of new bone deposition and superior containment of bone tissue within implant site when compared to collagen sponge carriers. We conclude that this growth factor sequestration platform is effective in the healing of clinically relevant bone defect volume and could overcome some of the safety concerns and limitations currently associated with rhBMP-2 therapy such as excessive heterotopic ossification.

Novel Protamine-Based Polyelectrolyte Carrier Enhances Low-Dose rhBMP-2 in Posterolateral Spinal Fusion.

Study Design. A rodent posterolateral spinal fusion model. Objective. This study evaluated a protamine-based polyelectrolyte complex (PEC) developed to use heparin in enhancing the biological activity of low-dose recombinant human bone morphogenetic protein-2 (rhBMP-2) in spinal fusion. Summary of Background Data. rhBMP-2 is commonly regarded as the most potent bone-inducing molecule. However, poor pharmacokinetics and short in vivo half-life means that large amounts of the bioactive growth factor are required for consistent clinical outcomes. This has been associated with a number of adverse tissue reactions including seroma and heterotopic ossification. Glycosaminoglycans including heparin are known to stabilize rhBMP-2 bioactivity. Previous studies with poly-L-lysine (PLL) and heparin-based PEC carriers amplified the therapeutic efficacy of low-dose BMP-2. However, questions remained on the eventual clinical applicability of relatively cytotoxic PLL. In the present study, a protamine-based PEC carrier was designed to further enhance the safety and efficacy of BMP-2 by delivering lower dose within the therapeutic window. Methods. A polyelectrolyte shell was deposited on the surface of alginate microbead templates using the polycation (protamine)/polyanion (heparin) layer-by-layer polyelectrolyte self-assembly protocol. rhBMP-2 was loaded onto the outermost layer via heparin affinity binding. Loading and release of rhBMP-2 were evaluated in vitro. The bone-inductive ability of 20-fold reduction of rhBMP-2 with the different carrier vehicle was evaluated using a posterolateral spinal fusion model in rats. Results. In vitro uptake and release analysis, protamine-based PEC showed higher uptake and significantly enhanced control release than PLL-based PEC (P < 0.05). In vivo implantation with protamine-based and PLL-based PEC showed better fusion performances than absorbable collagen sponge–delivered same dose of rhBMP-2, and negative control group through manual palpation, micro–computed tomography, and histological analyses. Conclusion. Solid posterolateral spinal fusion was achieved with 20-fold reduction of rhBMP-2 when delivered using protamine-based PEC carrier in the rat posterolateral spinal fusion model. Level of Evidence: N/A

Polyelectrolyte Complex Carrier Enhances Therapeutic Efficiency and Safety Profile of Bone Morphogenetic Protein-2 in Porcine Lumbar Interbody Fusion Model.

Study Design. Porcine lumbar interbody fusion model. Objective. This study evaluates the effect of polyelectrolyte complex (PEC) carrier in enhancing the therapeutic efficiency and safety profile of bone morphogenetic protein-2 (BMP-2) in a large animal model. Summary of Background Data. Extremely large amounts of BMP-2 are administered to achieve consistent spinal fusion, which has led to complications. Heparin-modified PEC carrying reduced BMP-2 doses of 0.5 &mgr;g was demonstrated to achieve consistent spinal fusion with reduction of complications in rodent model. The purpose of this study was to evaluate whether PEC could improve the therapeutic efficiency of BMP-2 in porcine model. Methods. Three-segment (L3–L6) anterior lumbar interbody fusions with instrumentation were performed on 6 pigs using 3 different doses of BMP-2, namely, (1) 50 &mgr;g, (2) 150 &mgr;g, and (3) 300 &mgr;g. The BMP-2 was delivered using heparin-modified alginate microbeads loaded into biodegradable cage. Fusion performance was evaluated after 3 months. Results. Manual palpation and micro–computed tomography showed consistent fusion in all experimental groups. Heterotopic bone formation beyond the cage implant area was more evident in group 2 and group 3 than in group 1. Similarly, superior bone microstructure was observed in the new bone with the lowered BMP-2 dose. Biomechanical evaluation revealed enhanced stiffness of the operated segments compared with nonoperated segments (P < 0.05). Mechanical stability was maintained despite dose reduction of BMP-2. Although the mineral apposition rate was higher in group 3, unsatisfactory bony microstructure with decreased trabecular number was observed in group 3 compared with group 1. Conclusion. PEC carrying low doses of BMP-2 achieved consistent interbody fusion. We observed dose-related reduction in heterotopic ossification without compromising the stability of the fused segments. PEC carrier reduces the efficacious doses of BMP-2. This could enhance the safety profile of BMP-2 and reduce dose- and carrier-related complications. Level of Evidence: N/A

Fabrication of polycaprolactone-silanated β-tricalcium phosphate-heparan sulfate scaffolds for spinal fusion applications

BACKGROUND CONTEXT Interbody spinal fusion relies on the use of external fixation and the placement of a fusion cage filled with graft materials (scaffolds) without regard for their mechanical performance. Stability at the fusion site is instead reliant on fixation hardware combined with a selected cage. Ideally, scaffolds placed into the cage should both support the formation of new bone and contribute to the mechanical stability at the fusion site. PURPOSE We recently developed a scaffold consisting of silane-modified PCL-TCP (PCL-siTCP) with mechanical properties that can withstand the higher loads generated in the spine. To ensure the scaffold more closely mimicked the bone matrix, we incorporated collagen (Col) and a heparan sulfate glycosaminoglycan sugar (HS3) with increased affinity for heparin-binding proteins such as bone morphogenetic protein-2 (BMP-2). The osteostimulatory characteristic of this novel device delivering exogenous BMP2 was assessed in vitro and in vivo as a prelude to future spinal fusion studies with this device. STUDY DESIGN/SETTING A combination of cell-free assays (BMP2 release), progenitor cell-based assays (BMP2 bioactivity, cell proliferation and differentiation), and rodent ectopic bone formation assays was used to assess the osteostimulatory characteristics of the PCL-siTCP-based scaffolds. MATERIALS AND METHODS Freshly prepared rat mesenchymal stem cells were used to determine reparative cell proliferation and differentiation on the PCL-siTCP-based scaffolds over a 28-day period in vitro. The bioactivity of BMP2 released from the scaffolds was assessed on progenitor cells over a 28-day period using ALP activity assays and release kinetics as determined by enzyme-linked immunosorbent assay. For ectopic bone formation, intramuscular placement of scaffolds into Sprague Dawley rats (female, 4 weeks old, 120-150 g) was achieved in five animals, each receiving four treatments randomized for location along the limb. The four groups tested were (1) PCL-siTCP/Col (5-mm diameter×1-mm thickness), PCL-siTCP/Col/BMP2 (5 µg), (3) PCL-siTCP/Col/HS3 (25 µg), and (4) PCL-siTCP/Col/HS3/BMP2 (25 and 5 µg, respectively). Bone formation was evaluated at 8 weeks post implantation by microcomputed tomography (µCT) and histology. RESULTS Progenitor cell-based assays (proliferation, mRNA transcripts, and ALP activity) confirmed that BMP2 released from PCL-siTCP/Col/HS3 scaffolds increased ALP expression and mRNA levels of the osteogenic biomarkers Runx2, Col1a2, ALP, and bone gla protein-osteocalcin compared with devices without HS3. When the PCL-siTCP/Col/HS3/BMP2 scaffolds were implanted into rat hamstring muscle, increased bone formation (as determined by two-dimensional and three-dimensional µCTs and histologic analyses) was observed compared with scaffolds lacking BMP2. More consistent increases in the amount of ectopic bone were observed for the PCL-siTCP/Col/HS3/BMP2 implants compared with PCL-siTCP/Col/BMP2. Also, increased mineralizing tissue within the pores of the scaffold was seen with modified-tetrachrome histology, a result confirmed by µCT, and a modest but detectable increase in both the number and the thickness of ectopic bone structures were observed with the PCL-siTCP/Col/HS3/BMP2 implants. CONCLUSIONS The combination of PCL-siTCP/Col/HS3/BMP2 thus represents a promising avenue for further development as a bone graft alternative for spinal fusion surgery.