Surendra G. Gattani

Fabrication of fenofibrate nanocrystals by probe sonication method for enhancement of dissolution rate and oral bioavailability

Fenofibrate (FBT) is lipophillic drug used in hypercholesterolemia and hypertriglyceridemia having logP 5.375, low solubility (practically insoluble in water) and low oral bioavailability (36%). The purpose of work was to develop FBT nanocrystals for the enhancement of solubility and oral bioavailability. Fenofibrate nanosuspension was prepared using probe sonicator and transformed into dry powder using freeze drying and characterized by DSC, FTIR, XRPD, SEM, particle size, polydispersity index (PDI), zeta potential, solubility, in vitro dissolution, in vivo bioavailability and stability studies. Formulation FNS3 and pure drug exhibited the in vitro dissolution about 73.89% and 8.53% in 1% sodium lauryl sulfate (SLS) media, respectively. When the particle size reduced from 80,000±923nm to 460±20nm, saturation solubility was significantly increased. The saturation solubility of formulation FNS3 in 0.5% and 1% of SLS media found to be 67.51±1.5μg/mL and 107±1.9μg/mL, respectively. While, the saturation solubility of pure drug in 0.5% and 1% of SLS was found to be 6.02±1.51μg/ml and 23.54±1.54μg/ml, respectively. The pharmacokinetic study of optimized nanocrystals (FNS3) conducted in New Zealand white rabbits showed 4.73-fold increase in relative bioavailability than that of pure drug. Long term stability studies showed that there was no significant change in the mean particle size and PDI at 5°C±3°C after 180 days. This enhanced dissolution and bioavailability of fenofibrate nanocrystals could be the promising approach for oral delivery.

Solubility Enhancement of Lovastatin by Modified Locust Bean Gum Using Solid Dispersion Techniques

The aim of the present study was to improve the solubility of poorly water soluble drug lovastatin (LS) by solid dispersion (SD) techniques using modified locust bean gum (MLBG) as a carrier. The locust bean gum (LBG) was modified by heating and there observed irreversible decrease in viscosity, whereas swelling property remains unaffected. The advantage of modification of LBG was illustrated by difference in dissolution profiles of their SD. Effect of polymer concentration and methods of preparation on solubility enhancement were studied using solubility and dissolution studies, respectively. The result of solubility study showed increase in solubility of LS with increase in concentration of MLBG. It was found that the dissolution rate of LS from its SD was dependent on the method of preparation of solid dispersions. Dissolution study revealed that the modified solvent evaporation is most convenient and effective method for solubility enhancement of poorly water soluble drug LS, among various methods of preparation of SD. The prepared SDs were characterized by differential scanning calorimetry, scanning electron microscopy, and X-ray diffraction study. In vivo study was performed by measuring 3-hydroxy-3-methyl-glutaryl-coenzyme A (HMG Co-A) reductase inhibition activity. Significant reduction in HMG Co-A reductase activity was observed in case of solid dispersions of LS than plain LS. In conclusion, MLBG could be used as a potential carrier in enhancing the dissolution rate and bioavailability of LS.

Co-solvent Evaporation Method for Enhancement of Solubility and Dissolution Rate of Poorly Aqueous Soluble Drug Simvastatin: In vitro–In vivo Evaluation

A number of synthesized chemical molecules suffer from low aqueous solubility problems. Enhancement of aqueous solubility, dissolution rate, and bioavailability of drug is a very challenging task in drug development. In the present study, solubility and dissolution of poorly aqueous soluble drug simvastatin (SIM) was enhanced using hydrophilic, low viscosity grade polymer hydroxypropyl methylcellulose (HPMC K3LV). The co-solvent evaporation method was developed for efficient encapsulation of hydrophobic drug in polymer micelles of HPMC K3LV. Spray drying and rotaevaporation method were applied for solvent evaporation. Co-solvent-evaporated mixture in solid state was determined by differential scanning calorimetry (DSC), X-ray diffraction studies (XRD), scanning electron microscopy, and Fourier-transform infrared spectroscopy. In vitro–in vivo studies were performed on co-solvent-evaporated mixture and compared with SIM. In vivo study was conducted on healthy albino rats (Wister strain), and formulations were administered by oral route. Results of the study show the conversion of crystalline form of SIM into amorphous form. The dissolution rate was remarkably increased in co-solvent-evaporated mixtures compared to SIM. co-solvent-evaporated mixtures showed better reduction in total cholesterol and triglyceride levels than the SIM. The low-viscosity grade HPMC acts as a surfactant, which enhances the wetting of drug and thus improves the solubility of drug. The co-solvent evaporation method provides good encapsulation efficiency and produces amorphous form of SIM, which gave better solubility and dissolution than the crystalline SIM.

Formulation and Evaluation of Bi-layer Tablet of Metoclopramide Hydrochloride and Ibuprofen

The aim of this study was to prepare bi-layer tablet of Metoclopramide Hydrochloride (MTH) and Ibuprofen (IB) for the effective treatment of migraine. MTH and IB were formulated as immediate and sustained release layer respectively. MTH was formulated as immediate release layer by using various disintegrants like Ac-Di-Sol, Polyplasdone XL, Explotab, Agar and Gellan Gum. Treated form of gellan gum and agar was prepared and compared for their disintegrant efficiency with other disintegrants. IB was formulated as sustained release layer using hydrophilic matrix (hydroxypropylmethylcellulose [HPMC K4M]). The effect of concentration of hydrophilic matrix (HPMC K4M), binder (polyvinylpyrollidone [PVP K30]) and buffer (sodium bicarbonate) on IB release was studied. The dissolution study of sustained release layer showed that an increasing amount of HPMC or PVP K30 results in reduced IB release. The inclusion of buffer (sodium bicarbonate) enhanced the release of IB from sustained release layer. The rational for formulation of bi-layer tablet of these two drugs in combination was (1) MTH increases the absorption of acidic non-steroidal anti-inflammatory drug (NSAID) by increasing gastric motility. So sequential release of MTH (as immediate release) and IB (as sustained release) was suitable for treatment of migraine. (2) MTH was degraded when prolonged contact with acidic NSAID. Bi-layer tablet was suitable for preventing direct contact of these two drugs and thus to maximize the efficacy of combination of two drugs for migraine.

Enhancement of oral bioavailability of atorvastatin calcium by self-emulsifying drug delivery systems (SEDDS)

The aim of the present study was to formulate a self-emulsifying drug delivery system of atorvastatin calcium and its characterization including in vitro and in vivo potential. The solubility of atorvastatin calcium was determined in various vehicles such as Captex 355, Captex 355 EP/NF, Ethyl oleate, Capmul MCM, Capmul PG-8, Gelucire 44/14, Tween 80, Tween 20, and PEG 400. Pseudoternary phase diagrams were plotted on the basis of solubility data of drug in various components to evaluate the microemulsification region. Formulation development and screening was carried out based on results obtained from phase diagrams and characteristics of resultant microemulsion. Prepared formulations were tested for microemulsifying properties and evaluated for clarity, precipitation, viscosity determination, drug content and in vitro dissolution. The optimized formulation further evaluated for particle size distribution, zeta potential, stability studies and in vivo potential. In vivo performance of the optimized formulation was evaluated using a Triton-induced hypercholesterolemia model in male Albino Wistar rats. The formulation significantly reduced serum lipid levels as compared with atorvastatin calcium. Thus studies illustrated the potential use for the delivery of hydrophobic drug such as atorvastatin calcium by oral route.

Chitosan-chondroitin sulfate based matrix tablets for colon specific delivery of indomethacin.

The different approaches for targeting orally administered drugs to the colon include coating with pH-dependent polymers, design of time-release dosage forms, and the utilization of carriers that are degraded exclusively by colonic bacteria. The aim of the present study was to develop a single unit, site-specific drug formulation allowing targeted drug release in the colon. Matrix tablets were prepared by wet granulation using cross-linked chitosan (ChI) and chondroitin sulfate (ChS) polysaccharides as binder and carrier. ChS was used to form polyelectrolyte complexes (PEC) with ChI, and its potential as a colon-targeted drug carrier was investigated. Indomethacin was used as a model drug. The ChI and ChS PEC was characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and powder X-ray diffraction studies (XRD). The matrix tablets were tested in vitro for their suitability as colon-specific drug delivery systems. FTIR demonstrated that the PEC forms through an electrostatic interaction between the protonated amine (NH3+) group of ChI with the free carboxylate (COO−) group and sulfate (SO42−) group of ChS. DSC and XRD indicated that the PEC has different thermal characteristics from ChI or ChS. The dissolution data demonstrates that the dissolution rate of the tablet is dependent upon the concentration of polysaccharide used as binder and matrix and time of cross-linking. The study confirmed that selective delivery of indomethacin to the colon can be achieved using cross-linked ChI and ChS polysaccharides.

In situ gels of Metoclopramide Hydrochloride for intranasal delivery: In vitro evaluation and in vivo pharmacokinetic study in rabbits

Intranasal (IN) administration is a promising approach for rapid-onset delivery of medications and to circumvent their first-pass elimination when taken orally. Metoclopramide Hydrochloride (MET HCl) is a potent antiemetic, effective even for preventing emesis induced by cancer chemotherapy. The feasibility of developing an efficacious intranasal formulation of metoclopramide has been undertaken in this study. Formulations were modulated so as to have gelation at physiological ion content after intranasal administration. Gelation was determined by physical appearance. The mucoadhesive force in terms of detachment stress, determined using sheep nasal mucosal membrane, increased with increasing concentration of carbopol. The results of in vitro drug permeation studies across sheep nasal mucosa indicate that effective permeation could be significantly increased by using in situ gelling formulation with carbopol concentration 0.15% or greater. Histological examination did not detect any damage during in vitro permeation studies. Finally, the bioavailability study in rabbits revealed that the absolute bioavailability of MET HCl was significantly increased from 40.67% in the case of the oral drug solution to 54.61% in the case of the nasal in situ gel. This study points to the potential of mucoadhesive nasal in situ gel in terms of ease of administration, accuracy of dosing, prolonged nasal residence and improved drug bioavailability.

Development of colon targeted multiparticulate pulsatile drug delivery system for treating nocturnal asthma

The aim of the present study was to develop theophylline fast release enteric-coated pellets as a pulsatile drug delivery to the colon. The novelty of this work is the combination of pH and time-dependant enteric polymers as a single coating for the development of multiparticulate formulation. Theophylline pellets were optimized by applying a 2-factors 3-levels full factorial design. Continuous dissolution studies were carried out in simulated gastric, intestinal, and colonic fluid with pH 1.2 (0.1 N HCl), pH 7.4 and pH 6.8 (phosphate buffer), respectively. The lag time prior to the drug release was highly affected by combination of two factors, i.e. the percentage of Eudragit RL100 in polymer mixture and coating level. The formulation containing Eudragit RL100 and Eudragit S100 with a ratio of 4:1 and coating level of 12%w/w was found to be optimum. The results of serum study in New Zealand rabbits showed that the developed formulation provided a significant lag phase of 5 h. The present study demonstrates that the theophylline enteric-coated pellets could be successfully colon targeted by the design of pH- and time-dependant modified chronopharmaceutical formulation. In conclusion, pulsatile drug release over a period of 3–12 h is consistent with the requirements for chronopharmaceutical drug delivery.

Formulation and evaluation of nasal mucoadhesive microspheres of sumatriptan succinate.

The purpose of present research work was to develop mucoadhesive microspheres for nasal delivery with the aim to avoid hepatic first-pass metabolism, improve therapeutic efficacy and enhance residence time. For the treatment of migraine, hydroxypropyl methylcellulose (HPMC) K4M and K15M based microspheres containing sumatriptan succinate (SS) were prepared by spray-drying technique. The microspheres were evaluated with respect to the yield, particle size, incorporation efficiency, swelling property, in vitro mucoadhesion, in vitro drug release, histological study and stability. Microspheres were characterized by differential scanning calorimetry, scanning electron microscopy and X-ray diffraction study. It was found that the particle size, swelling ability and incorporation efficiency of microspheres increases with increasing drug-to-polymer ratio. HPMC-based microspheres show adequate mucoadhesion and do not have any destructive effect on nasal mucosa. On the basis of these results, SS microspheres based on HPMC may be considered as a promising nasal delivery system.

Pluronic lecithin organogel as a topical drug delivery system

The objective of this study was to formulate and evaluate the pluronic lecithin organogel containing flurbiprofen for topical application. Different formulations of pluronic lecithin organogels were prepared by using pluronic F127, lecithin, flurbiprofen, isopropyl palmitate, water, sorbic acid, and potassium sorbate. To study the in vitro potential of these formulations, permeation studies were performed with Keshary-Chien diffusion cells. The results of the in vitro permeation studies found that release of flurbiprofen from dialysis membrane-70 was more than excised dorsal rat skin. Gelation temperature study was carried out to determine the temperature where sol-gel transformation takes place. The viscosities of different formulations were determined by using Brookfield Viscometer at 25°C, the viscosity of formulations increases as the lecithin concentration increases. Also the formulations were tested for appearance and feel psychorheologically, pH, and drug content. Interactions between the components of the gel have been investigated by differential scanning calorimetry and X-ray powder diffractometry. The optimized formulation subjected to differential scanning calorimetry shows no drug–polymer interaction. To investigate the in vivo performance of the formulations, a carrageenan-induced rat paw edema model and skin irritation study was used. The stability studies and freeze–thaw thermal cyclic test were carried out, showing no phase separation of gel, and representing gel stability. Statistical analysis of the data of animal study (anti-inflammatory activity) was done by using one way analysis of variance (ANOVA) followed by Dunnett’s test. The formulation shows a statistically significant anti-inflammatory activity and is non-irritant to skin.