Veena S. Belgamwar

Direct nose to brain drug delivery via integrated nerve pathways bypassing the blood–brain barrier: an excellent platform for brain targeting

Introduction: The blood–brain barrier (BBB) represents a stringent barrier for delivery of neurotherapeutics in vivo. An attempt to overcome this barrier is represented by the direct transport of drugs from the nose to the brain along the olfactory and trigeminal nerve pathways. These nerve pathways initiate in the nasal cavity at olfactory neuroepithelium and terminate in the brain. An enormous range of neurotherapeutics, both macromolecules and low molecular weight drugs, can be delivered to the central nervous system (CNS) via this route. Areas covered: Present review highlights the literature on the anatomy-physiology of the nasal cavity, pathways and mechanisms of neurotherapeutic transport across nasal epithelium and their biofate and various strategies to enhance direct nose to brain drug delivery. The authors also emphasize a variety of drug molecules and carrier systems delivered via this route for treating CNS disorders. Patents related to direct nose to brain drug delivery systems have also been listed. Expert opinion: Direct nose to brain drug delivery system is a practical, safe, non-invasive and convenient form of formulation strategy and could be viewed as an excellent alternative approach to conventional dosage forms. Existence of a direct transport route from the nasal cavity to the brain, bypassing the BBB, would offer an exciting mode of delivering neurotherapeutic agents.

Solid lipid based nanocarriers: an overview.

In the era of nanoparticulate controlled and site specific drug delivery systems, use of solid lipids to produce first generation lipid nanoparticles, solid lipid nanoparticles (SLN), became a revolutionary approach in the early nineties. The present review is designed to provide an insight into how SLN are finding a niche as promising nanovectors and forms a sound basis to troubleshoot the existing problems associated with traditional systems. Herein, authors had tried to highlight the frontline aspects prominent to SLN. An updated list of lipids, advanced forms of SLN, methods of preparation, characterization parameters, and various routes of administration of SLN are explored in-depth. Stability, toxicity, stealthing, targeting efficiency and other prospectives of SLN are also discussed in detail. The present discussion embodies the potential of SLN, now being looked up by various research groups around the world for their utility in the core areas of pharmaceutical sciences, thereby urging pharmaceutical industries to foster their scale-up. Pojava nanočestica za kontroliranu i ciljanu isporuku lijekova izrađenih iz čvrstih lipida (SLN) imala je ranih devedesetih godina revolucionarno značenje. U ovom preglednom radu opisani su SLN sustavi kao korisni nanovektori za isporuku lijekova. Autori ističu prednosti SLN sustava, daju pregled lipida za njihovu izradu, opisuju metode priprave, karakterizacijske parametre i različite načine primjene SLN-a. Osim toga, detaljno se raspravlja o njihovoj stabilnosti, toksičnosti te mogućnosti ciljane isporuke. Istaknute su mogućnosti koje pružaju SLNi u području farmaceutskih znanosti i njihova moguća primjena u farmaceutskoj industriji.

Formulation and evaluation of Nimodipine-loaded solid lipid nanoparticles delivered via lymphatic transport system

In an attempt to increase oral bioavailability and to target intestinal lymphatic transport system, Nimodipine loaded solid lipid nanoparticles (NMD-SLNs) were prepared. Nimodipine (NMD) is highly lipophilic antihypertensive drug having (logP 3.41) and 13% oral bioavailability. NMD-SLNs were prepared with palmitic acid (PA), poloxamer 188 and soya lecithin as a lipid, surfactant and co-surfactant respectively using high pressure homogeniser. A (2(3)) factorial design was employed; three factors such as lipid, surfactant and co-surfactant concentration were used. Parameters investigated includes particle size, polydispersity index (PDI), zeta potential, drug entrapment efficiency (EE %), drug loading efficiency (LE %), in vitro drug release of the SLNs. Optimised SLNs (F8) had particle size of 116±21 nm, zeta potential of -10±(-4.8) mV, EE of 93.66±9.72% and cumulative drug release of 87.52±2.54% in 10 h. The pharmacokinetic study of optimised SLNs conducted in male Albino Wistar rats showed 2.08-fold increase in relative bioavailability than that of NMD solution, when administered orally. Differential scanning calorimetry study revealed absence of any chemical interaction between NMD and PA while SEM study confirmed the non spherical shape of optimised SLNs. Accelerated stability studies showed that there was no significant change in the mean particle size and PDI after storage at 25±2°C/60±5% RH for the period of three months. Due to enhanced bioavailability, these NMD-SLNs are considered to be promising vehicles for oral delivery.

Solid lipid based nanocarriers: An overview / Nanonosači na bazi čvrstih lipida: Pregled

In the era of nanoparticulate controlled and site specific drug delivery systems, use of solid lipids to produce first generation lipid nanoparticles, solid lipid nanoparticles (SLN), became a revolutionary approach in the early nineties. The present review is designed to provide an insight into how SLN are finding a niche as promising nanovectors and forms a sound basis to troubleshoot the existing problems associated with traditional systems. Herein, authors had tried to highlight the frontline aspects prominent to SLN. An updated list of lipids, advanced forms of SLN, methods of preparation, characterization parameters, and various routes of administration of SLN are explored in-depth. Stability, toxicity, stealthing, targeting efficiency and other prospectives of SLN are also discussed in detail. The present discussion embodies the potential of SLN, now being looked up by various research groups around the world for their utility in the core areas of pharmaceutical sciences, thereby urging pharmaceutical industries to foster their scale-up. Pojava nanočestica za kontroliranu i ciljanu isporuku lijekova izrađenih iz čvrstih lipida (SLN) imala je ranih devedesetih godina revolucionarno značenje. U ovom preglednom radu opisani su SLN sustavi kao korisni nanovektori za isporuku lijekova. Autori ističu prednosti SLN sustava, daju pregled lipida za njihovu izradu, opisuju metode priprave, karakterizacijske parametre i različite načine primjene SLN-a. Osim toga, detaljno se raspravlja o njihovoj stabilnosti, toksičnosti te mogućnosti ciljane isporuke. Istaknute su mogućnosti koje pružaju SLNi u području farmaceutskih znanosti i njihova moguća primjena u farmaceutskoj industriji.

Novel surface modified polymer–lipid hybrid nanoparticles as intranasal carriers for ropinirole hydrochloride: in vitro, ex vivo and in vivo pharmacodynamic evaluation

Here we report fabrication and evaluation of novel surface modified polymer–lipid hybrid nanoparticles (PLN) as robust carriers for intranasal delivery of ropinirole hydrochloride (ROPI HCl). Sustained release, avoidance of hepatic first pass metabolism, and improved therapeutic efficacy are the major objectives of this experiment. PLN were fabricated by emulsification-solvent diffusion technique and evaluated for physicochemical parameters, in vitro mucoadhesion, in vitro diffusion, ex vivo permeation, mucosal toxicity and stability studies. Box-Behnken experimental design approach has been employed to assess the influence of two independent variables, viz. surfactant (Pluronic F-68) and charge modifier (stearylamine) concentration on particle size, ζ-potential and entrapment efficiency of prepared PLN. Numerical optimization techniques were used for selecting optimized formulation sample, further confirmed by three dimensional response surface plots and regression equations. Results of ANOVA demonstrated the significance of suggested models. DSC and SEM analysis revealed the encapsulation of amorphous form of drug into PLN system, and spherical shape. PLN formulation had shown good retention with no severe signs of damage on integrity of nasal mucosa. Release pattern of drug-loaded sample was best fitted to zero order kinetic model with non-Fickian super case II diffusion mechanism. In vivo pharmacodynamic studies were executed to compare therapeutic efficacy of prepared nasal PLN formulation against marketed oral formulation of same drug. In summary, the PLN could be potentially used as safe and stable carrier for intranasal delivery of ROPI HCl, especially in treatment of Parkinson’s disease.

Novel surface modified solid lipid nanoparticles as intranasal carriers for ropinirole hydrochloride: application of factorial design approach

Abstract Present investigation deals with intranasal delivery of ropinirole hydrochloride (ROPI HCl), loaded in solid lipid nanoparticles (SLNs). Prime objectives of this experiment are avoidance of hepatic first pass metabolism and to improve therapeutic efficacy in the treatment of Parkinson’s disease. SLNs were fabricated by emulsification-solvent diffusion technique. A 32-factorial design approach has been employed to assess the influence of two independent variables, namely Pluronic F-68 and stearylamine concentration on particle size, ζ-potential and entrapment efficiency of prepared SLNs. Prepared samples were further evaluated for in vitro drug diffusion, ex vivo drug permeation, histopathological and stability studies. Differential scanning calorimetry analysis revealed the encapsulation of amorphous form of drug into lipid matrix, while scanning electron microscopy studies indicated the spherical shape. Fabricated SLNs had shown no severe signs of damage on integrity of nasal mucosa. Release pattern of prepared drug-loaded sample was best fitted to zero-order kinetic model with non-Fickian super case II diffusion mechanism. In vivo pharmacodynamic studies were carried out to compare therapeutic efficacy of prepared nasal formulation against marketed oral formulation. Results of analysis of variance demonstrated the significance of suggested model. Three-dimensional response surface plots and regression equations confirmed the corresponding influence of selected independent variables on measured responses. Our findings suggested the feasibility of investigated system for intranasal administration.

Formulation, optimization and evaluation of spray-dried mucoadhesive microspheres as intranasal carriers for Valsartan.

This investigation deals with the intranasal delivery of Valsartan, encapsulated in HPMC-based spray-dried mucoadhesive microspheres, with an aim to provide rapid absorption and quick onset of action for treating hypertension. A 23-factorial design has been employed for the assessment of influence of three independent variables, namely inlet temperature, feed-flow rate and drug-polymer ratio on production yield, particle size and in vitro drug diffusion of the prepared microspheres. Microspheres were evaluated for particle size, entrapment efficiency, swelling property, in vitro mucoadhesion, in vitro drug diffusion, ex vivo drug permeation, histopathological examination and stability studies. The results of differential scanning calorimetry, X-ray diffraction and scanning electron microscopy revealed molecular dispersion of Valsartan into microspheres with spherical shape and smooth surface. Optimized formulation indicated good mucoadhesion with no severe sign of damage on nasal mucosa. Results of the non-invasive animal studies in dexamethasone-induced hypertensive rat model suggested the suitability of investigated drug delivery system for intranasal administration.

Self-Assembled, Chitosan Grafted PLGA Nanoparticles for Intranasal Delivery: Design, Development and Ex Vivo Characterization

The objective of present study was to modify the surface of Poly(D,L-lactide-co-glycolide acid) (PLGA) nanoparticles (NPs) with chitosan to enhance the mucoadhesive potential of carrier system. Grafting of chitosan on PLGA surface was carried out via amide bond formation mediated by carbodiimide and confirmed by FTIR spectroscopy. Self-assembled PLGA NPs containing chlorpromazine hydrochloride were fabricated by 23 factorial design. The improved mucoadhesive potential was confirmed by several tests including in vitro mucoadhesion study. Ex vivo permeation was satisfactory. Histopathological study on sheep nasal mucosa revealed safe mucoadhesion. They were also found to be robust on accelerated stability study.

Pluronic lecithin organogel as a topical drug delivery system

The objective of this study was to formulate and evaluate the pluronic lecithin organogel containing flurbiprofen for topical application. Different formulations of pluronic lecithin organogels were prepared by using pluronic F127, lecithin, flurbiprofen, isopropyl palmitate, water, sorbic acid, and potassium sorbate. To study the in vitro potential of these formulations, permeation studies were performed with Keshary-Chien diffusion cells. The results of the in vitro permeation studies found that release of flurbiprofen from dialysis membrane-70 was more than excised dorsal rat skin. Gelation temperature study was carried out to determine the temperature where sol-gel transformation takes place. The viscosities of different formulations were determined by using Brookfield Viscometer at 25°C, the viscosity of formulations increases as the lecithin concentration increases. Also the formulations were tested for appearance and feel psychorheologically, pH, and drug content. Interactions between the components of the gel have been investigated by differential scanning calorimetry and X-ray powder diffractometry. The optimized formulation subjected to differential scanning calorimetry shows no drug–polymer interaction. To investigate the in vivo performance of the formulations, a carrageenan-induced rat paw edema model and skin irritation study was used. The stability studies and freeze–thaw thermal cyclic test were carried out, showing no phase separation of gel, and representing gel stability. Statistical analysis of the data of animal study (anti-inflammatory activity) was done by using one way analysis of variance (ANOVA) followed by Dunnett’s test. The formulation shows a statistically significant anti-inflammatory activity and is non-irritant to skin.

Microwave induced solubility enhancement of poorly water soluble atorvastatin calcium.

Objectives  The objective of the present investigation was to enhance the solubility and dissolution rate of atorvastatin calcium (ATR) by a solid dispersion technique using poly(ethylene glycol) 6000 (PEG 6000).