Suzanne C. Bart

Towards uranium catalysts

The forefront of research into the complexes of uranium reveals chemical transformations that challenge and expand our view of this unique element. Certain ligands form multiple bonds to uranium, and small, inert molecules such as nitrogen and carbon dioxide become reactive when in complex with the metal. Such complexes provide clues to the catalytic future of uranium, in which the applications of the element extend far beyond the nuclear industry. Most excitingly, the ability of uranium to use its outermost f electrons for binding ligands might enable the element to catalyse reactions that are impossible with conventional, transition-metal catalysts.

Functionalization of Carbon Dioxide and Carbon Disulfide Using a Stable Uranium(III) Alkyl Complex

A rare uranium(III) alkyl complex, Tp*(2)U(CH(2)Ph) (2) (Tp* = hydrotris(3,5-dimethylpyrazolyl)borate), was synthesized by salt metathesis from Tp*(2)UI (1) and KCH(2)Ph and fully characterized using (1)H NMR, infrared, and electronic absorption spectroscopies as well as X-ray crystallography. This complex has a uranium-carbon distance of 2.57(2) Å, which is comparable to other uranium alkyls reported. Treating this compound with either carbon dioxide or carbon disulfide results in insertion into the uranium-carbon bond to generate Tp*(2)U(κ(2)-O(2)CCH(2)Ph) (3) and Tp*(2)U(SC(S)CH(2)Ph) (4), respectively. These species, characterized spectroscopically and by X-ray crystallography, feature new carboxylate and dithiocarboxylate ligands. Analysis by electronic absorption spectroscopy supports the trivalent oxidation state of the uranium center in both of these derivatives. Addition of trimethylsilylhalides (Me(3)SiX; X = Cl, I) to 3 results in the release of the free silyl ester, Me(3)SiOC(O)CH(2)Ph, forming the initial uranium monohalide species, Tp*(2)UX, which can then be used over multiple cycles for the functionalization of carbon dioxide.

Synthesis, characterization, and multielectron reduction chemistry of uranium supported by redox-active α-diimine ligands.

Uranium compounds supported by redox-active α-diimine ligands, which have methyl groups on the ligand backbone and bulky mesityl substituents on the nitrogen atoms {(Mes)DAB(Me) = [ArN═C(Me)C(Me)═NAr], where Ar = 2,4,6-trimethylphenyl (Mes)}, are reported. The addition of 2 equiv of (Mes)DAB(Me), 3 equiv of KC(8), and 1 equiv of UI(3)(THF)(4) produced the bis(ligand) species ((Mes)DAB(Me))(2)U(THF) (1). The metallocene derivative, Cp(2)U((Mes)DAB(Me)) (2), was generated by the addition of an equimolar ratio of (Mes)DAB(Me) and KC(8) to Cp(3)U. The bond lengths in the molecular structure of both species confirm that the α-diimine ligands have been doubly reduced to form ene-diamide ligands. Characterization by electronic absorption spectroscopy shows weak, sharp transitions in the near-IR region of the spectrum and, in combination with the crystallographic data, is consistent with the formulation that tetravalent uranium ions are present and supported by ene-diamide ligands. This interpretation was verified by U L(III)-edge X-ray absorption near-edge structure (XANES) spectroscopy and by variable-temperature magnetic measurements. The magnetic data are consistent with singlet ground states at low temperature and variable-temperature dependencies that would be expected for uranium(IV) species. However, both complexes exhibit low magnetic moments at room temperature, with values of 1.91 and 1.79 μ(B) for 1 and 2, respectively. Iodomethane was used to test the reactivity of 1 and 2 for multielectron transfer. While 2 showed no reactivity with CH(3)I, the addition of 2 equiv of iodomethane to 1 resulted in the formation of a uranium(IV) monoiodide species, ((Mes)DAB(Me))((Mes)DAB(Me2))UI {3; (Mes)DAB(Me2) = [ArN═C(Me)C(Me(2))NAr]}, which was characterized by single-crystal X-ray diffraction and U M(4)- and M(5)-edge XANES. Confirmation of the structure was also attained by deuterium labeling studies, which showed that a methyl group was added to the ene-diamide ligand carbon backbone.

Harnessing redox activity for the formation of uranium tris(imido) compounds

Classically, late transition-metal organometallic compounds promote multielectron processes solely through the change in oxidation state of the metal centre. In contrast, uranium typically undergoes single-electron chemistry. However, using redox-active ligands can engage multielectron reactivity at this metal in analogy to transition metals. Here we show that a redox-flexible pyridine(diimine) ligand can stabilize a series of highly reduced uranium coordination complexes by storing one, two or three electrons in the ligand. These species reduce organoazides easily to form uranium-nitrogen multiple bonds with the release of dinitrogen. The extent of ligand reduction dictates the formation of uranium mono-, bis- and tris(imido) products. Spectroscopic and structural characterization of these compounds supports the idea that electrons are stored in the ligand framework and used in subsequent reactivity. Computational analyses of the uranium imido products probed their molecular and electronic structures, which facilitated a comparison between the bonding in the tris(imido) structure and its tris(oxo) analogue.

Reduction Chemistry of Aryl- and Alkyl-Substituted Bis(imino)pyridine Iron Dihalide Compounds: Molecular and Electronic Structures of [(PDI)2Fe] Derivatives

Sodium amalgam reduction of the aryl-substituted bis(imino)pyridine iron dibromide complex, ((Et)PDI)FeBr2 ((Et)PDI = 2,6-(2,6-Et2-C6H3N=CMe)2C5H3N), under a dinitrogen atmosphere in pentane furnished the bis(chelate)iron compound, ((Et)PDI)2Fe. Characterization by X-ray crystallography established a distorted four-coordinate iron center with two kappa2-bis(imino)pyridine ligands. Reducing the steric demands of the imine substituent to either a less sterically encumbered aryl ring (e.g., C6H4-4-OMe) or an alkyl group (e.g., Cy, iPr, cis-myrtanyl) also yielded bis(chelate) compounds from sodium amalgam reduction of the corresponding dihalide. Characterization of the compounds with smaller imine substituents by X-ray diffraction established six-coordinate, pseudo-octahedral compounds. In one case, a neutral bis(chelate)iron compound was prepared by reduction of the corresponding iron dication, [(PDI)2Fe]2+, providing chemical confirmation of electrochemically generated species that were previously reported as too reducing to isolate. Magnetic measurements, metrical parameters from X-ray structures, Mössbauer spectroscopy, and open-shell, broken symmetry DFT calculations were used to establish the electronic structure of both types (four- and six-coordinate) of neutral bis(chelate) compounds. The experimentally observed S = 1 compounds are best described as having high-spin ferrous (S(Fe) = 2) centers antiferromagnetically coupled to two bis(imino)pyridine radical anions. Thus, the two-electron reduction of the diamagnetic, low-spin complex [(PDI)2Fe]2+ to [(PDI)2Fe] is ligand-based with a concomitant spin change at iron.

Carbon–Carbon Reductive Elimination from Homoleptic Uranium(IV) Alkyls Induced by Redox-Active Ligands

The synthesis, characterization, and reactivity of the homoleptic uranium(IV) alkyls U(CH(2)C(6)H(5))(4) (1-Ph), U(CH(2)-p-CH(3)C(6)H(4))(4) (1-p-Me), and U(CH(2)-m-(CH(3))(2)C(6)H(3))(4) (1-m-Me(2)) are reported. The addition of 4 equiv of K(CH(2)Ar) (Ar = Ph, p-CH(3)C(6)H(4), m-(CH(3))(2)C(6)H(3)) to UCl(4) at -108 °C produces 1-Ph in good yields and 1-p-Me and 1-m-Me(2) in moderate yields. Further characterization of 1-Ph by X-ray crystallography confirmed η(4)-coordination of each benzyl ligand to the uranium center. Magnetic studies produced an effective magnetic moment of 2.60 μ(B) at 23 °C, which is consistent with a tetravalent uranium 5f(2) electronic configuration. Addition of 1 equiv of the redox-active α-diimine (Mes)DAB(Me) ((Mes)DAB(Me) = [ArN═C(Me)C(Me)═NAr]; Ar = 2,4,6-trimethylphenyl (Mes)) to 1-Ph results in reductive elimination of 1 equiv of bibenzyl (PhCH(2)CH(2)Ph), affording ((Mes)DAB(Me))U(CH(2)C(6)H(5))(2) (2-Ph). Treating an equimolar mixture of 1-Ph and 1-Ph-d(28) with (Mes)DAB(Me) forms the products from monomolecular reductive elimination, 2-Ph, 2-Ph-d(14), bibenzyl, and bibenzyl-d(14). This is confirmed by (1)H NMR spectroscopy and GC/MS analysis of both organometallic and organic products. Addition of 1 equiv of 1,2-bis(dimethylphosphino)ethane (dmpe) to 1-Ph results in formation of the previously synthesized (dmpe)U(CH(2)C(6)H(5))(4) (3-Ph), indicating the redox-innocent chelating phosphine stabilizes the uranium center in 3-Ph and prevents reductive elimination of bibenzyl. Full characterization for 3-Ph, including X-ray crystallography, is reported.

A New Tripodal Ligand System with Steric and Electronic Modularity for Uranium Coordination Chemistry

The synthesis of a potentially redox active tripodal ligand containing a tris(aryloxide) functionalized mesitylene anchor, (((tBu)ArOH)(3)mes) (1), and its metalation with low-valent uranium to form [(((tBu)ArO)(3)mes)U] (1-U) is reported. The results from characterization by X-ray crystallography, spectroscopic studies, and computational analysis, as well as initial reactivity studies, support a +3 uranium oxidation state. Comparison to the previously synthesized complex, [(((tBu)ArO)(3)tacn)U] (2-U), featuring the redox-innocent triazacyclononane anchor reveals that changing the anchor from the flexible triazacyclononane to a rigid mesityl fragment increases the structural flexibility of the aryloxide substituents in complexes of 1. The synthesis and crystal structures of uranium(IV) amide complexes of 1-U and 2-U are discussed.

Highlights in Uranium Coordination Chemistry

The coordination chemistry of uranium has become an increasingly popular topic in the last 15 years.Much of the reason for this interest has come from the development of easy to synthesize, stable startingmaterials. These materials allowed an entry point for the exploration of uranium with any ligand imaginable.This chapter covers the most significant developments in the coordination chemistry of non-cyclopentadienyluranium complexes and their reactivity with small molecules.

Multielectron C–O Bond Activation Mediated by a Family of Reduced Uranium Complexes

A family of cyclopentadienyl uranium complexes supported by the redox-active pyridine(diimine) ligand, (Mes)PDI(Me) ((Mes)PDI(Me) = 2,6-((Mes)N═CMe)2-C5H3N, Mes = 2,4,6-trimethylphenyl), has been synthesized. Using either Cp* or Cp(P) (Cp* = 1,2,3,4,5-pentamethylcyclopentadienide, Cp(P) = 1-(7,7-dimethylbenzyl)cyclopentadienide), uranium complexes of the type Cp(X)UI2((Mes)PDI(Me)) (1-Cp(X); X = * or P), Cp(X)UI((Mes)PDI(Me)) (2-Cp(X)), and Cp(X)U((Mes)PDI(Me))(THF)n (3-Cp(X); *, n = 1; P, n = 0) were isolated and characterized. The series was generated via ligand centered reduction events; thus the extent of (Mes)PDI(Me) reduction varies in each case, but the uranium(IV) oxidation state is maintained. Treating 2-Cp(X), which has a doubly reduced (Mes)PDI(Me), with furfural results in radical coupling between the substrate and (Mes)PDI(Me), leading to C-C bond formation to form Cp(X)UI((Mes)PDI(Me)-CHOC4H3O) (4-Cp(X)). Exposure of 3-Cp* and 3-Cp(P), which contain a triply reduced (Mes)PDI(Me) ligand, to benzaldehyde and benzophenone, respectively, results in the corresponding pinacolate complexes Cp*U(O2C2Ph2H2)((Mes)PDI(Me)) (5-Cp*) and Cp(P)U(O2C2Ph4)((Mes)PDI(Me)) (5-Cp(P)). The reducing equivalents required for this coupling are derived solely from the redox-active ligand, rather than the uranium center. Complexes 1-5 have been characterized by (1)H NMR and electronic absorption spectroscopies, and SQUID magnetometry was employed to confirm the mono(anionic) [(Mes)PDI(Me)](-) ligand in 1-Cp(P) and 5-Cp(P). Structural parameters of complexes 1-Cp(P), 2-Cp(X), 4-Cp*, and 5-Cp(X) have been elucidated by X-ray crystallography.

C-C bond formation and related reactions at the CNC backbone in (smif)FeX (smif = 1,3-di-(2-pyridyl)-2-azaallyl): dimerizations, 3 + 2 cyclization, and nucleophilic attack; transfer hydrogenations and alkyne trimerization (X = N(TMS)2, dpma = (di-(2-pyridyl-methyl)-amide)).

Molecular orbital analysis depicts the CNC(nb) backbone of the smif (1,3-di-(2-pyridyl)-2-azaallyl) ligand as having singlet diradical and/or ionic character where electrophilic or nucleophilic attack is plausible. Reversible dimerization of (smif)Fe{N(SiMe3)2} (1) to [{(Me3Si)2N}Fe]2(μ-κ(3),κ(3)-N,py2-smif,smif) (2) may be construed as diradical coupling. A proton transfer within the backbone-methylated, and o-pyridine-methylated smif of putative ((b)Me2(o)Me2smif)FeN(SiMe3)2 (8) provides a route to [{(Me3Si)2N}Fe]2(μ-κ(4),κ(4)-N,py2,C-((b)Me,(b)CH2,(o)Me2(smif)H))2 (9). A 3 + 2 cyclization of ditolyl-acetylene occurs with 1, leading to the dimer [{2,5-di(pyridin-2-yl)-3,4-di-(p-tolyl-2,5-dihydropyrrol-1-ide)}FeN(SiMe3)2]2 (11), and the collateral discovery of alkyne cyclotrimerization led to a brief study that identified Fe(N(SiMe3)2(THF) as an effective catalyst. Nucleophilic attack by (smif)2Fe (13) on (t)BuNCO and (2,6-(i)Pr2C6H3)NCO afforded (RNHCO-smif)2Fe (14a, R = (t)Bu; 14b, 2,6-(i)PrC6H3). Calculations suggested that (dpma)2Fe (15) would favorably lose dihydrogen to afford (smif)2Fe (13). H2-transfer to alkynes, olefins, imines, PhN═NPh, and ketones was explored, but only stoichiometric reactions were affected. Some physical properties of the compounds were examined, and X-ray structural studies on several dinuclear species were conducted.