T.F. La Porta

Movement-assisted sensor deployment

Abstract-Adequate coverage is very important for sensor networks to fulfill the issued sensing tasks. In many working environments, it is necessary to make use of mobile sensors, which can move to the correct places to provide the required coverage. In this paper, we study the problem of placing mobile sensors to get high coverage. Based on Voronoi diagrams, we design two sets of distributed protocols for controlling the movement of sensors, one favoring communication and one favoring movement. In each set of protocols, we use Voronoi diagrams to detect coverage holes and use one of three algorithms to calculate the target locations of sensors it holes exist. Simulation results show the effectiveness of our protocols and give insight on choosing protocols and calculation algorithms under different application requirements and working conditions.

HAWAII: a domain-based approach for supporting mobility in wide-area wireless networks

Mobile IP is the current standard for supporting macromobility of mobile hosts. However, in the case of micromobility support, there are several competing proposals. In this paper, we present the design, implementation, and performance evaluation of HAWAII, a domain-based approach for supporting mobility. HAWAII uses specialized path setup schemes which install host-based forwarding entries in specific routers to support intra-domain micromobility. These path setup schemes deliver excellent performance by reducing mobility related disruption to user applications. Also, mobile hosts retain their network address while moving within the domain, simplifying quality-of-service (QoS) support. Furthermore, reliability is achieved through maintaining soft-state forwarding entries for the mobile hosts and leveraging fault detection mechanisms built in existing intra-domain routing protocols. HAWAII defaults to using Mobile IP for macromobility, thus providing a comprehensive solution for mobility support in wide-area wireless networks.

Sensor relocation in mobile sensor networks

Recently there has been a great deal of research on using mobility in sensor networks to assist in the initial deployment of nodes. Mobile sensors are useful in this environment because they can move to locations that meet sensing coverage requirements. This paper explores the motion capability to relocate sensors to deal with sensor failure or respond to new events. We define the problem of sensor relocation and propose a two-phase sensor relocation solution: redundant sensors are first identified and then relocated to the target location. We propose a Grid-Quorum solution to quickly locate the closest redundant sensor with low message complexity, and propose to use cascaded movement to relocate the redundant sensor in a timely, efficient and balanced way. Simulation results verify that the proposed solution outperforms others in terms of relocation time, total energy consumption, and minimum remaining energy.

Bidding Protocols for Deploying Mobile Sensors

Constructing a sensor network with a mix of mobile and static sensors can achieve a balance between sensor coverage and sensor cost. In this paper, we design two bidding protocols to guide the movement of mobile sensors in such sensor networks to increase the coverage to a desirable level. In the protocols, static sensors detect coverage holes locally by using Voronoi diagrams and bid mobile sensors to move. Mobile sensors accept the highest bids and heal the largest holes. Simulation results show that our protocols achieve suitable trade-off between coverage and sensor cost

Anticollision Protocols for Single-Reader RFID Systems: Temporal Analysis and Optimization

One of the major challenges in the use of Radio Frequency-based Identification (RFID) on a large scale is the ability to read a large number of tags quickly. Central to solving this problem is resolving collisions that occur when multiple tags reply to the query of a reader. To this purpose, several MAC protocols for passive RFID systems have been proposed. These typically build on traditional MAC schemes, such as aloha and tree-based protocols. In this paper, we propose a new performance metric by which to judge these anticollision protocols: time system efficiency. This metric provides a direct measure of the time taken to read a group of tags. We then evaluate a set of well-known RFID MAC protocols in light of this metric. Based on the insights gained, we propose a new anticollision protocol, and show that it significantly outperforms previously proposed mechanisms.

Data dissemination with ring-based index for wireless sensor networks

In current sensor networks, sensor nodes are capable of not only measuring real world phenomena, but also storing, processing and transferring these measurements. Many data dissemination techniques have been proposed for sensor networks. However, these techniques may not work well in a large scale sensor network where a huge amount of sensing data are generated, but only a small portion of them are queried. In this paper, we propose an index-based data dissemination scheme to address the problem. This scheme is based on the idea that sensing data are collected, processed and stored at the nodes close to the detecting nodes, and the location information of these storing nodes is pushed to some index nodes, which act as the rendezvous points for sinks and sources. We further extend the scheme with an adaptive ring-based index (ARI) technique, in which the index nodes for one event type form a ring surrounding the location which is determined by the event type, and the ring can be dynamically reconfigured for fault tolerance and load balance. Analysis and simulations are conducted to evaluate the performance of the proposed index-based scheme. The results show that the index-based scheme outperforms the external storage-based scheme, the DCS scheme, and the local storage-based schemes with flood-response style. The results also show that using ARI can tolerate clustering failures and achieve load balance.

Proxy-based sensor deployment for mobile sensor networks

To provide satisfactory coverage is very important in many sensor network applications such as military surveillance. In order to obtain the required coverage in harsh environments, mobile sensors are helpful since they can move to cover the area not reachable by static sensors. Previous work on mobile sensor deployment is based on a round by round process, where sensors move iteratively until the maximum coverage is reached. Although these solutions can deploy mobile sensors in a distributed way, the mobile sensors may move in a zig-zag way and waste a lot of energy compared to moving directly to the final location. To address this problem, we propose a proxy-based sensor deployment protocol. Instead of moving iteratively, sensors calculate their target locations based on a distributed iterative algorithm, move logically, and exchange new logical locations with their new logical neighbors. Actual movement only occurs when sensors determine their final locations. Simulation results show that the proposed protocol can significantly reduce the energy consumption compared to previous work, while maintaining similar coverage.

On supporting distributed collaboration in sensor networks

In sensor networks, nodes may malfunction due to the hostile environment. Therefore, dealing with node failure is a very important research issue. In this paper, we study distributed cooperative failure detection techniques. In the proposed techniques, the nodes around a suspected node collaborate with each other to reach an agreement on whether the suspect is faulty or malicious. We first formalize the problem as how to construct a dominating tree to cover all the neighbors of the suspect and give the lower bound of the message complexity. Two tree-based propagation collection protocols are proposed to construct dominating trees and collect information via the tree structure. Instead of using the traditional flooding technique, we propose a coverage-based heuristic to improve the system performance. Theoretical analysis and simulation results show that the heuristic can help achieve a higher tree coverage with lower message complexity, lower delay and lower energy consumption.

On Exploiting Transient Social Contact Patterns for Data Forwarding in Delay-Tolerant Networks

Unpredictable node mobility, low node density, and lack of global information make it challenging to achieve effective data forwarding in Delay-Tolerant Networks (DTNs). Most of the current data forwarding schemes choose the nodes with the best cumulative capability of contacting others as relays to carry and forward data, but these nodes may not be the best relay choices within a short time period due to the heterogeneity of transient node contact characteristics. In this paper, we propose a novel approach to improve the performance of data forwarding with a short time constraint in DTNs by exploiting the transient social contact patterns. These patterns represent the transient characteristics of contact distribution, network connectivity and social community structure in DTNs, and we provide analytical formulations on these patterns based on experimental studies of realistic DTN traces. We then propose appropriate forwarding metrics based on these patterns to improve the effectiveness of data forwarding. When applied to various data forwarding strategies, our proposed forwarding metrics achieve much better performance compared to existing schemes with similar forwarding cost.

Establishing Pair-Wise Keys in Heterogeneous Sensor Networks

Many applications that make use of sensor networks require secure communication. Because asymmetric-key solutions are difficult to implement in such a resource-constrained environment, symmetric-key methods coupled with a priori key distribution schemes have been proposed to achieve the goals of data secrecy and integrity. These approaches typically assume that all sensors are similar in terms of capabilities, and hence deploy the same number of keys in all sensors in a network to provide the aforementioned protections. In this paper we demonstrate that a probabilistic unbalanced distribution of keys throughout the network that leverages the existence of a small percentage of more capable sensor nodes can not only provide an equal level of security but also reduce the consequences of node compromise. We demonstrate the effectiveness of this approach on small networks using a variety of trust models and then demonstrate the application of this method to very large systems. The approach and analysis presented in this paper can be applied to all protocols that use probabilistic keys including those that employ broadcast mechanisms, hash functions or polynomials for the generation of keys.