T.H. Mahato

Nanocrystalline zinc oxide for the decontamination of sarin.

Nanocrystalline zinc oxide materials were prepared by sol-gel method and were characterized by X-ray diffraction, scanning electron microscopy, thermogravimetry, nitrogen adsorption and infrared spectroscopy techniques. The data confirmed the formation of zinc oxide materials of zincite phase with an average crystallite size of approximately 55 nm. Obtained material was tested as destructive adsorbent for the decontamination of sarin and the reaction was followed by GC-NPD and GC-MS techniques. The reaction products were characterized by GC-MS and the data explored the role of hydrolysis reaction in the detoxification of sarin. Sarin was hydrolyzed to form surface bound non-toxic phosphonate on the surface of nano-zinc oxide. The data also revealed the values of rate constant and half-life to be 4.12h(-1) and 0.16 h in the initial stages of the reaction and 0.361 h(-1) and 1.9h at the final stages of the reaction for the decontamination reaction on nanocrystalline ZnO.

Effect of calcinations temperature of CuO nanoparticle on the kinetics of decontamination and decontamination products of sulphur mustard.

Present study investigates the potential of CuO nanoparticles calcined at different temperature for the decontamination of persistent chemical warfare agent sulphur mustard (HD) at room temperature (30 ± 2 °C). Nanoparticles were synthesized by precipitation method and characterized by using SEM, EDAX, XRD, and Raman Spectroscopy. Synthesized nanoparticles were tested as destructive adsorbents for the degradation of HD. Reactions were monitored by GC-FID technique and the reaction products characterized by GC-MS. It was observed that the rate of degradation of HD decreases with the increase in calcination temperature and there is a change in the percentage of product of HD degradation. GC-MS data indicated that the elimination product increases with increase in calcination temperature whereas the hydrolysis product decreases.

Molecularly imprinted nanopatterns for the recognition of biological warfare agent ricin

Molecularly imprinted polymer (MIP) for biological warfare agent (BWA) ricin was synthesized using silanes in order to avoid harsh environments during the synthesis of MIP. The synthesized MIP was utilized for the recognition of ricin. The complete removal of ricin from polymer was confirmed by fluorescence spectrometer and SEM-EDAX. SEM and EDAX studies confirmed the attachment of silane polymer on the surface of silica gel matrix. SEM image of Ricin-MIP exhibited nanopatterns and it was found to be entirely different from the SEM image of non-imprinted polymer (NIP). BET surface area analysis revealed more surface area (227 m(2)/g) for Ricin-MIP than that of NIP (143 m(2)/g). In addition, surface area study also showed more pore volume (0.5010 cm(3)/g) for Ricin-MIP than that of NIP (0.2828 cm(3)/g) at 12 nm pore diameter confirming the presence of imprinted sites for ricin as the reported diameter of ricin is 12 nm. The recognition and rebinding ability of the Ricin-MIP was tested in aqueous solution. Ricin-MIP rebound more ricin when compared to the NIP. Chromatogram obtained with Ricin-MIP exhibited two peaks due to imprinting, however, chromatogram of NIP exhibited only one peak for free ricin. SDS-PAGE result confirmed the second peak observed in chromatogram of Ricin-MIP as ricin peak. Ricin-MIP exhibited an imprinting efficiency of 1.76 and it also showed 10% interference from the structurally similar protein abrin.

Reactions of sulphur mustard and sarin on V1.02O2.98 nanotubes

Reactions of sulphur mustard and sarin were studied on the surface of V(1.02)O(2.98) nanotubes by gas chromatography and gas chromatography-mass spectrometry techniques. The V(1.02)O(2.98) nanotube samples were made by using hydrothermal method and characterized by scanning electron microscopy, nitrogen adsorption, X-ray diffractometry and thermogravimetry. Later, they were exposed to sulphur mustard and sarin separately at ambient temperature (30+/-2 degrees C). The data explored the formation of sulphoxide of sulphur mustard, thiodiglycol for sulphur mustard and isopropyl methyl phosphonic acid for sarin on V(1.02)O(2.98) nanotubes illustrating the role of oxidation and hydrolysis reactions in the decontamination.

Kinetics of degradation of sulfur mustard and sarin simulants on HKUST-1 metal organic framework

The applicability of HKUST-1 for the degradation of sulfur mustard and sarin simulants was studied with and without coadsorbed water. Degradation was found to be via hydrolysis and dependent on the nucleophilic substitution reaction, vapour pressure and molecular diameter of the toxicants.

Catalytic removal of carbon monoxide over carbon supported palladium catalyst.

Carbon supported palladium (Pd/C) catalyst was prepared by impregnation of palladium chloride using incipient wetness technique, which was followed by liquid phase reduction with formaldehyde. Thereafter, Pd/C catalyst was characterized using X-ray diffractometery, scanning electron microscopy, atomic absorption spectroscopy, thermo gravimetry, differential scanning calorimetry and surface characterization techniques. Catalytic removal of carbon monoxide (CO) over Pd/C catalyst was studied under dynamic conditions. Pd/C catalyst was found to be continuously converting CO to CO(2) through the catalyzed reaction, i.e., CO+1/2O(2)→CO(2). Pd/C catalyst provided excellent protection against CO. Effects of palladium wt%, CO concentration, humidity, space velocity and reaction environment were also studied on the breakthrough behavior of CO.

Vapour breakthrough behaviour of carbon tetrachloride - A simulant for chemical warfare agent on ASZMT carbon: A comparative study with whetlerite carbon

ASZMT (Cu, Ag, Zn, Mo, TEDA impregnated) carbon was prepared by impregnation of active carbon with ammonical salts of Cu (II), Ag (I), Zn (II), Mo (VI) and TEDA using incipient wetness technique. Thereafter, ASZMT carbon was characterized using scanning electron microscopy, atomic absorption spectroscopy, thermogravimetry and surface characterization techniques. The ASZMT carbon was evaluated under dynamic conditions against carbon tetrachloride vapour that was used as a simulant for the persistent chemical warfare agents for testing breakthrough times of filter cartridges and canisters of gas masks in the National Approval Test of Respirators. The effect of carbon tetrachloride concentration, test flow rate, temperature and relative humidity on the breakthrough behaviour of the ASZMT carbon for CCl4 vapour has also been studied. The study clearly indicated that the ASZMT carbon provided adequate protection against carbon tetrachloride vapours. The breakthrough time decreased with the increase of the carbon tetrachloride concentration and flow rate. The variation in temperature and relative humidity did not significantly affect the breakthrough behaviour of ASZMT carbon at high vapour concentration of carbon tetrachloride whereas breakthrough time of ASZMT carbon reduced by an increase of relative humidity at low carbon tetrachloride vapour concentration.

Breakthrough behaviour of NBC canister against carbon tetrachloride: a simulant for chemical warfare agents

A nuclear, biological, chemical (NBC) canister was indigenously developed using active carbon impregnated with ammoniacal salts of copper (II), chromium (VI) and silver (I), and high efficiency particulate aerosol filter media. The NBC canister was evaluated against carbon tetra chloride (CCl4) vapours, which were used as a simulant for persistent chemical warfare agents under dynamic conditions for testing breakthrough times of canisters of gas masks in the National Approval Test of Respirators. The effects of CCl4 concentration, test flow rate, temperature, and relative humidity (RH) on the breakthrough time of the NBC canister against CCl4 vapour were also studied. The impregnated carbon that filled the NBC canister was characterized for surface area and pore volume by N2 adsorption-desorption isotherm at liquid nitrogen temperature. The study clearly indicated that the NBC canister provides adequate protection against CCl4 vapours. The breakthrough time decreased with the increase of the CCl4 concentration and flow rate. The variation in temperature and RH did not significantly affect the breakthrough behaviour of the NBC canister at high vapour concentration of CCl4, whereas the breakthrough time of the NBC canister was reduced by an increase of RH at low CCl4 vapour concentration.