T. Mutoh

Discrimination of local radiative and nonradiative recombination processes in an InGaN/GaN single-quantum-well structure by a time-resolved multimode scanning near-field optical microscopy

Precise identification of recombination dynamics based on local, radiative, and nonradiative recombination has been achieved at room temperature in a blue-light-emitting InxGa1−xN/GaN single-quantum-well structure by comparing the photoluminescence (PL) spectra taken by illumination-collection mode (I-C mode) and those by illumination mode (I-mode) in scanning near-field microscopy. The PL data mapped with PL lifetimes, as well as with PL spectra, revealed that the probed area could be classified into four different regions whose dominating processes are (1) radiative recombination within a probing aperture, (2) nonradiative recombination within an aperture, (3) diffusion of photogenerated excitons/carriers out of an aperture resulting in localized luminescence, and (4) the same diffusion process as (3), but resulting in nonradiative recombination.

Studies of currentless, high-beta plasma in the Heliotron E device

A currentless plasma with a volume-averaged beta value of 2% has been produced with neutral beam heating. Target plasmas were created by second harmonic resonance heating with electron cyclotron waves (150–350 kW and 53.2 GHz) at a magnetic field strength of 0.94 T. Neutral beam injection (23–30 keV and 1.3−2.6 MW) was used to heat the plasma further. MHD stable and unstable high-beta plasmas were observed. The Q-mode plasmas were produced with the help of intense neutral gas puffing. Properties of the MHD activity and confinement of high-beta plasmas are discussed and compared with theoretical studies.

ICRF heating of currentless plasma in Heliotron E

In the Heliotron E device, a non-axisymmetric helical system, ICRF heating experiments were carried out for the first time, using fast-mode and slow-mode waves. In the fast-wave heating experiment, ICRF power of up to 550 kW was emitted during 15 ms by four antenna loops. Effective heating of a current-less ECRH-produced target plasma was observed over a wide density range. The plasma loading resistance of an antenna loop reached about 5 ?. This is a value comparable with that of tokamak experiments. The increments of ion and electron temperatures by fast-wave heating were about 200?230 eV at an electron density of about 3 ? 1019m?3. Minority heating and pure second-harmonic heating have almost the same efficiency ((1?2) ? 1019eV?m?3?kW?1) during the short RF pulse used (t ? 15 ms). The energy transfer rate from the waves to ions and electrons could be explained by mode conversion. The signals of toroidal eigen-modes were experimentally observed and radial mode numbers could be determined using a simple model. In the slow-wave heating experiment, the upper density limit of effective heating appeared to be in qualitative agreement with wave theory.

Heating and confinement studies of electron cyclotron resonance heated plasmas in Heliotron E

Radiofrequency (RF) heating of currentless plasmas is performed at the fundamental electron cyclotron frequency. The absorbed power profile is determined from the decay of the electron internal energy profile immediately after the RF pulse is turned off. Measurements of the absorbed power profile at various positions of the cyclotron resonance layer are compared with single-pass absorption profiles predicted by a ray tracing code. The profiles of electron temperature, density and ion temperature are studied as a function of the absorbed power, its radial profile and the electron line averaged density. Finally, a scaling of the energy confinement time obtained by regression analysis is compared with a scaling for neutral beam heated plasmas.

Visible and VUV spectroscopic diagnostics on Heliotron E

Diagnostic applications of visible and VUV spectroscopic techniques, as applied to the currentless Heliotron E plasma device, are described. Visible spectroscopy has been used to measure (i) ion temperature, (ii) proton‐to‐electron density ratio, (iii) Zeff by charge exchange recombination from an intense neutral beam, (iv) radial electric field by poloidal rotation velocity measurement, and (v) electron density around an ablating pellet by a Stark profile. VUV spectroscopy has been used to investigate emission spectra due to multiply ionized impurity species. This information is used to measure the densities of these species, and to learn about the transport of these particles. Recently, a flat‐field survey spectrometer has been constructed and used to study the emission spectra due to metallic impurities in ICRF‐heated plasmas.

Searching for O-X-B mode-conversion window with monitoring of stray microwave radiation in LHD

In the Large Helical Device, the stray microwave radiation is monitored by using so-called sniffer probes during electron cyclotron heating. In monitoring the stray radiation, we changed the microwave beam injection angle and search the O-X-B mode-conversion window to excite electron Bernstein waves (EBWs). When the microwave beam is injected toward the vicinity of the predicted O-X-B mode-conversion window, the electron temperature rises in the central part of overdense plasmas. In that case, the stray radiation level near the injection antenna becomes low. These results indicate that monitoring the stray radiation near the injection antenna is helpful in confirming the effectiveness of excitation of EBWs simply without precise analysis.

Transport analysis of injected impurities in currentless Heliotron E plasmas

Impurity transport in currentless Heliotron E plasmas is examined. The main aim of the experiment is to clarify the density dependence of impurity transport both in electron cyclotron heated (ECH) and neutral beam injected (NBI) plasmas. In experiments with a stationary electron density, the confinement time of impurities is determined as a function of the line averaged electron density. The inherent difference between ECH and NBI plasmas, observed in an earlier measurement, seems to have been masked by the operating conditions. From a direct comparison between NBI plasmas and simultaneous ECH and NBI heated plasmas of the same density, a pumping-out effect of impurities by the ECH pulse is established. From numerical analyses, the unexpected discrepancy between observed and calculated VUV spectral data can be explained by a charge exchange process. The observed impurity transport is found to be well described by a model which incorporates the effects of radial diffusion and inward convection. The inward flow does not seem to be due to the plasma potential because the flow is also observed in ECH plasmas where the heating power is expected to contribute to a reversed potential. The flow velocity is of the order of the classical friction between background ions and seems to play only a minor role in various aspects of impurity transport in NBI plasmas, such as impurity accumulation. The variety in impurity transport in Heliotron E plasmas is best understood by changes in the diffusion coefficient.

Pellet injection experiment on NBI current-free plasmas in Heliotron E

The first pellet injection experiments on NBI-heated current-free plasmas in Heliotron E have been carried out. The pellet and plasma species are hydrogen. The increment of line-averaged density is up to 8.2 × 1019m−3, which is consistent with particle numbers of 1020 contained in a pellet used in the experiment. The behaviour of the plasma is studied in two cases of magnetic field strength, B = 1.9 T and B = 0.94 T. The density after pellet injection decays slowly (50–150 ms) in most cases, but in some cases with B = 0.94 T it decays rapidly (< 10 ms). This may be related to power balance.

Studies of particle behaviour in Heliotron E by means of balmer-alpha laser fluorescence spectroscopy

Measurements of atomic hydrogen density profiles in Heliotron E plasmas were performed, where attention was focussed on the anisotropy of the profiles in the poloidal cross section. Obtained penetration profiles of atomic hydrogen agreed well with the Monte Carlo code calculations of the penetration of Franck-Condon neutrals when averaged electron densities bar n e are larger than 10 19 m -3 . For bar n e <10 19 m -3 , however, experimental profiles decreased steeper than calculated ones. Degree of the anisotropy of the neutral profiles in the poloidal cross section was also found to change with the value of bar n e . Global particle confinement time τ p was evaluated from the measured atomic hydrogen profile. The results showed that τ p is arourud 20 ms for B =1 .9 T. In case of NBI plasma, τ p increases as increasing the magnetic field strength, while it decreases as increasing the absorbed power.

Transport simulation of the currentless ECRH plasma in Heliotron E

The transport of a currentless ECRH plasma in Heliotron E is studied numerically, using a 1-D transport code with an assumed RF power deposition profile. The investigated parameter range is as follows: 300 Te 1000 eV, Ti 120 eV, 2 < e< 10 X 1012 cm−3 and PRF ≈ 90 kW at B = I T. Four typical models for the transport coefficients are used in the numerical calculations. It is found that a neoclassical model results in a remarkable discrepancy of the time evolution of the electron temperature Te(r) and density ne(r) profiles with regard to the measured values. The neoclassical model which includes the effects of the helical field ripple seems to simulate the saturation of Te(0), in agreement with the experimental results. This saturation is due to the dependence of . However, a consistent description of Te(r) and ne(r) cannot be given by this model. In order to reproduce the measured profiles, it is necessary to use radially increasing transport coefficients. Adding Alcator-like anomalous transport terms (independent of Te) to the neoclassical transport model, it is found that e and PRF dependences of Te(0) can be adequately explained. The fourth model investigated has a temperature-dependent . For ions the e dependence of an anomaly factor, ,is also examined.