T. Notake

Configuration flexibility and extended regimes in Large Helical Device

Recent experimental results in the Large Helical Device have indicated that a large pressure gradient can be formed beyond the stability criterion for the Mercier (high-n) mode. While the stability against an interchange mode is violated in the inward-shifted configuration due to an enhancement of the magnetic hill, the neoclassical transport and confinement of high-energy particle are, in contrast, improved by this inward shift. Mitigation of the unfavourable effects of MHD instability has led to a significant extension of the operational regime. Achievements of the stored energy of I MJ and the volume-averaged beta of 3% are representative results from this finding. A confinement enhancement factor above the international stellarator scaling ISS95 is also maintained around 1.5 towards a volume-averaged beta, (beta), of 3%. Configuration studies on confinement and MHD characteristics emphasize the superiority of the inward-shifted geometry to other geometries. The emergence of coherent modes appears to be consistent with the linear ideal MHD theory; however, the inward-shifted configuration has reduced heat transport in spite of a larger amplitude of magnetic fluctuation than the outward-shifted configuration. While neoclassical helical ripple transport becomes visible for the outward-shifted configuration in the collisionless regime, the inward-shifted configuration does not show any degradation of confinement deep in the collisionless regime (nu* < 0.1). The distinguished characteristics observed in the inward-shifted configuration help in creating a new perspective of MHD stability and related transport in net current-free plasmas. The first result of the pellet launching at different locations is also reported.

Formation of electron internal transport barrier and achievement of high ion temperature in Large Helical Device

An internal transport barrier (ITB) was observed in the electron temperature profile in the Large Helical Device [O. Motojima et al., Phys. Plasmas 6, 1843 (1999)] with a centrally focused intense electron cyclotron resonance microwave heating. Inside the ITB the core electron transport was improved, and a high electron temperature, exceeding 10 keV in a low density, was achieved in a collisionless regime. The formation of the electron-ITB is correlated with the neoclassical electron root with a strong radial electric field determined by the neoclassical ambipolar flux. The direction of the tangentially injected beam-driven current has an influence on the electron-ITB formation. For the counter-injected target plasma, a steeper temperature gradient, than that for the co-injected one, was observed. As for the ion temperature, high-power NBI (neutral beam injection) heating of 9 MW has realized a central ion temperature of 5 keV with neon injection. By introducing neon gas, the NBI absorption power was incr...

Energy confinement and thermal transport characteristics of net current free plasmas in the Large Helical Device

The energy confinement and thermal transport characteristics of net current free plasmas in regimes with much smaller gyroradii and collisionality than previously studied have been investigated in the Large Helical Device (LHD). The inward shifted configuration, which is superior from the point of view of neoclassical transport theory, has revealed a systematic confinement improvement over the standard configuration. Energy confinement times are improved over the International Stellarator Scaling 95 by a factor of 1.6 ± 0.2 for an inward shifted configuration. This enhancement is primarily due to the broad temperature profile with a high edge value. A simple dimensional analysis involving LHD and other medium sized heliotrons yields a strongly gyro-Bohm dependence (T E Ω ρ *-3.8 ) of energy confinement times. It should be noted that this result is attributed to a comprehensive treatment of LHD for systematic confinement enhancement and that the medium sized heliotrons have narrow temperature profiles. The core stored energy still indicates a dependence of T E Ω ρ *-2.6 when data only from LIED are processed. The local heat transport analysis of discharges dimensionally similar except for ρ * suggests that the heat conduction coefficient lies between Bohm and gyro-Bohm in the core and changes towards strong gyro-Bohm in the peripheral region. Since the inward shifted configuration has a geometrical feature suppressing neoclassical transport, confinement improvement can be maintained in the collisionless regime where ripple transport is important. The stiffness of the pressure profile coincides with enhanced transport in the peaked density profile obtained by pellet injection.

Formation of electron internal transport barriers by highly localized electron cyclotron resonance heating in the large helical device

Internal transport barriers with respect to electron thermal transport (eITB) were observed in the large helical device, when the electron cyclotron resonance heating (ECH) power was highly localized on the centre of a plasma sustained by neutral beam injection. The eITB is characterized by a high central electron temperature of 6–8 keV with an extremely steep gradient, as high as 55 keV m−1 and a low electron thermal diffusivity within a normalized average radius ρ≈0.3 as well as by the existence of clear thresholds for the ECH power and plasma collisionality.

MHD characteristics in the high beta regime of the Large Helical Device

Note: Proc. 18th IAEA Fusion Energy Conference, Sorrento, Italy, 4-10 October 2000, IAEA-CN-77 (EXP3/12), p. 157 (2000) Reference CRPP-CONF-2000-073 Record created on 2008-05-13, modified on 2017-05-12

Overview of confinement and MHD stability in the Large Helical Device

The Large Helical Device is a heliotron device with L = 2 and M = 10 continuous helical coils with a major radius of 3.5–4.1 m, a minor radius of 0.6 m and a toroidal field of 0.5–3 T, which is a candidate among toroidal magnetic confinement systems for a steady state thermonuclear fusion reactor. There has been significant progress in extending the plasma operational regime in various plasma parameters by neutral beam injection with a power of 13 MW and electron cyclotron heating (ECH) with a power of 2 MW. The electron and ion temperatures have reached up to 10 keV in the collisionless regime, and the maximum electron density, the volume averaged beta value and stored energy are 2.4 × 1020 m−3, 4.1% and 1.3 MJ, respectively. In the last two years, intensive studies of the magnetohydrodynamics stability providing access to the high beta regime and of healing of the magnetic island in comparison with the neoclassical tearing mode in tokamaks have been conducted. Local island divertor experiments have also been performed to control the edge plasma aimed at confinement improvement. As for transport study, transient transport analysis was executed for a plasma with an internal transport barrier and a magnetic island. The high ion temperature plasma was obtained by adding impurities to the plasma to keep the power deposition to the ions reasonably high even at a very low density. By injecting 72 kW of ECH power, the plasma was sustained for 756 s without serious problems of impurities or recycling.

Impact of pellet injection on extension of the operational region in LHD

Pellet injection has been used as a primary fuelling scheme in the Large Helical Device. With pellet injection, the operational region of NBI plasmas has been extended to higher densities while maintaining a favourable dependence of energy confinement on density, and several important values, such as plasma stored energy of 0.88?MJ, energy confinement time of 0.3?s, ? of 2.4% at 1.3?T and density of 1.1 ? 1020?m -3, have been achieved. These parameters cannot be attained by gas puffing. Ablation and the subsequent behaviour of the plasma have been investigated. The measured pellet penetration depth estimated on the basis of the duration of the H? emission is shallower than the depth predicted from the simple neutral gas shielding (NGS) model. It can be explained by the NGS model with inclusion of the effect of fast ions on the ablation. Just after ablation, the redistribution of the ablated pellet mass was observed on a short timescale (~400?ms). The redistribution causes shallow deposition and low fuelling efficiency.

Ion cyclotron range of frequencies heating and high-energy particle production in the Large Helical Device

Significant progress has been made with ion cyclotron range of frequencies (ICRF) heating in the Large Helical Device. This is mainly due to better confinement of the helically trapped particles and less accumulation of impurities in the region of the plasma core. During the past two years, ICRF heating power has been increased from 1.35 to 2.7 MW. Various wave-mode tests were carried out using minority-ion heating, second-harmonic heating, slow-wave heating and high-density fast-wave heating at the fundamental cyclotron frequency. This fundamental heating mode extended the plasma density range of effective ICRF heating to a value of 1×1020 m−3. This use of the heating mode was its first successful application in large fusion devices. Using the minority-ion mode gave the best performance, and the stored energy reached 240 kJ using ICRF alone. This was obtained for the inward-shifted magnetic axis configuration. The improvement associated with the axis-shift was common for both bulk plasma and highly accelerated particles. For the minority-ion mode, high-energy ions up to 500 keV were observed by concentrating the heating power near the plasma axis. The confinement properties of high-energy particles were studied for different magnetic axis configurations, using the power-modulation technique. It confirmed that with the inward-shifted configuration the confinement of high-energy particles was better than with the normal configuration. By increasing the distance of the plasma to the vessel wall to about 2 cm, the impurity influx was sufficiently reduced to allow sustainment of the plasma with ICRF heating alone for more than 2 min.

MHD instabilities and their effects on plasma confinement in Large Helical Device plasmas

Characteristics of MHD instabilities and their impacts on plasma confinement are studied in current free plasmas of the Large Helical Device. Spontaneous L?H transition is often observed in high beta plasmas close to 2% at low toroidal fields (Bt ? 0.75?T). The stored energy starts to rise rapidly just after the transition accompanying the clear rise in the electron density but quickly saturates due to the growth of the m = 2/n = 3 mode (m and n: poloidal and toroidal mode numbers), the rational surface of which is located in the edge barrier region, and edge localized mode (ELM) like activities having fairly small amplitude but high repetition frequency. Even in low beta plasmas without L?H transitions, ELM-like activities are sometimes induced in high performance plasmas with a steep edge pressure gradient and transiently reduce the stored energy up to 10%. Energetic ion driven MHD modes such as Alfv?n eigenmodes (AEs) are studied in a very wide range of characteristic parameters (the averaged beta of energetic ions, ?b?, and the ratio of energetic ion velocity to the Alfv?n velocity, Vb?/VA), of which range includes all tokamak data. In addition to the observation of toroidicity induced AEs (TAEs), coherent magnetic fluctuations of helicity induced AEs (HAEs) have been detected for the first time in NBI heated plasmas. The transition of a core-localized TAE to a global AE (GAE) is also observed in a discharge with temporal evolution of the rotational transform profile, having a similarity to the phenomenon observed in a reversed shear tokamak. At low magnetic fields, bursting TAEs transiently induce a significant loss of energetic ions, up to 40% of injected beams, but on the other hand play an important role in triggering the formation of transport barriers in the core and edge regions.

Extension of steering angle in a square corrugated waveguide antenna

A theoretical study of the square waveguide antenna with corrugated walls was carried out with reference to experimental results. When the length of the waveguide, to which the Gaussian beam is injected obliquely, is changed, a recursive Gaussian beam with high efficiency radiates from the waveguide exit in the asymmetric or symmetric direction with respect to a waveguide axis at almost the same interval. Because the optimum waveguide length for maximum efficiency decreases stepwise with increasing injection angle, adjustment of the waveguide length is not continuous but discrete. This method enables the injection angle, which is limited to 10° in a fixed waveguide length, to be increased by about two times. This is applicable to an antenna for an ITER-electron cyclotron heating/current drive and also to a launcher for a small machine with a narrow port where a steering mirror cannot be installed.