T. Scalici

Characterization of a new natural fiber from Arundo donax L. as potential reinforcement of polymer composites

The aim of this paper is to study the possibility of using of Arundo donax L. fibers as reinforcement in polymer composites. The fibers are extracted from the outer part of the stem of the plant, which widely grows in Mediterranean area and is diffused all around the world. To use these lignocellulosic fibers as reinforcement in polymer composites, it is necessary to investigate their microstructure, chemical composition and mechanical properties. Therefore, the morphology of A. donax L. fibers was investigated through electron microscopy, the thermal behavior through thermogravimetric analysis and the real density through a helium pycnometer. The chemical composition of the natural fibers in terms of cellulose, hemicellulose, lignin, and ash contents was determinated by using standard test methods. The mechanical characterization was carried out through single fiber tensile tests and a reliability analysis of the experimental data was performed. Furthermore, a mathematical model was applied to investigate the relation between the transverse dimension of the fibers and the mechanical properties.

New Polylactic Acid Composites Reinforced with Artichoke Fibers

In this work, artichoke fibers were used for the first time to prepare poly(lactic acid) (PLA)-based biocomposites. In particular, two PLA/artichoke composites with the same fiber loading (10% w/w) were prepared by the film-stacking method: the first one (UNID) reinforced with unidirectional long artichoke fibers, the second one (RANDOM) reinforced by randomly-oriented long artichoke fibers. Both composites were mechanically characterized in tensile mode by quasi-static and dynamic mechanical tests. The morphology of the fracture surfaces was analyzed through scanning electron microscopy (SEM). Moreover, a theoretical model, i.e., Hill’s method, was used to fit the experimental Young’s modulus of the biocomposites. The quasi-static tensile tests revealed that the modulus of UNID composites is significantly higher than that of the neat PLA (i.e., ~40%). Moreover, the tensile strength is slightly higher than that of the neat matrix. The other way around, the stiffness of RANDOM composites is not significantly improved, and the tensile strength decreases in comparison to the neat PLA.

Pull-off adhesion of hybrid glass-steel adhesive joints in salt fog environment

Abstract The aim of this paper was to evaluate the durability behaviour of glass/steel adhesive joints exposed to salt fog environmental conditions for ten weeks, according to ASTM B117 standard. To this scope, pull-off mechanical tests were carried out in order to evaluate the performances evolution and damage phenomena of the adhesive joints during the ageing exposition. Two different types of adhesives were compared (i.e. epoxy and polyurethane ones). Moreover, the effects of the glass surface condition and the presence of a basalt mat layer within the adhesive thickness were evaluated. The mechanical performances were related with the occurred failure mechanisms. Epoxy-based joints showed higher strength and durability than the polyurethane based ones. Furthermore, frosted glass surface condition and basalt interlayer addition enhanced mechanical durability in salt fog environment of glass–metal dissimilar joints.

Effect of sodium bicarbonate treatment on mechanical properties of flax-reinforced epoxy composite materials:

This paper deals with the evaluation of the effect of an eco-friendly and cost-effective surface treatment based on the use of sodium bicarbonate on the mechanical properties of flax-reinforced epoxy composites. To this aim, unidirectional fabrics were soaked for five days in 5 and 10% in weight of sodium bicarbonate solution at 25℃. Quasi-static and dynamic mechanical tests were performed and the fracture surfaces of the composites were analyzed through scanning electron microscopy. Results evidenced that this treatment improves the fiber–matrix adhesion thus increasing the performances of the composites. Treating the fabrics with 10% w/w of bicarbonate solution leads to improvements of ∼20 and ∼45% in tensile strength and modulus of the composites, respectively, compared to untreated ones. Furthermore, by increasing the concentration, negligible changes in the glass transition temperature and reductions in the tanδ peak heights were found. The observation of the fracture surfaces confirmed the beneficial effect of the proposed treatment.

Synergistic effect of fiber content and length on mechanical and water absorption behaviors of Phoenix sp. fiber-reinforced epoxy composites:

Phoenix sp. fiber-reinforced epoxy composites have been manufactured using compression molding technique. The effect of reinforcement volume content (0%, 10%, 20%, 30%, 40%, and 50%) and size (300 µm particles, 10 mm, 20 mm, and 30 mm fibers) on quasi-static and dynamic mechanical properties was investigated. Moreover, the water absorption properties of composites were analyzed at different environmental conditions (10℃, 30℃, and 60℃). For each reinforcement size, composites loaded with 40% in volume show highest tensile and flexural properties. Furthermore, composites with 300 µm particles present the best impact properties and the lowest water absorption, regardless of the environmental condition. The dynamic mechanical properties of the composites loaded with 40% in volume were analyzed by varying the reinforcement size and the load frequency (i.e., 0.5 Hz, 1 Hz, 2 Hz, 5 Hz, and 10 Hz). It was found that the glass transition temperature of short fiber-reinforced composites is higher than that of the composite loaded with particles.

Effect of NaOH Treatment on Properties of Phoenix Sp. Fiber

ABSTRACT The aim of this paper is to investigate the effect of an alkali treatment on physical, chemical, mechanical, and morphological properties of Phoenix Sp. fibers. The use of natural fibers as reinforcement in polymer composites requires a deep investigation to understand their behavior and which treatment is more appropriate to improve the quality of the untreated material. For this reason, fibers were extracted from the petioles of the Phoenix Sp. plant and they were treated with NaOH solution in different weight concentrations (5%, 10%, and 15%). The mechanical behavior was investigated through tensile test on single fiber at different gauge length (20 mm, 30 mm, 40 mm, 50 mm, and 60 mm). Chemical and physical analysis were performed to define the material properties. In particular, density analysis of untreated and treated fibers, optical analysis to measure the diameter of the fibers, moisture content evaluation, and a chemical composition analysis were carried out through standard methods. The modification of the surface morphology due to the alkali treatment was analyzed through scanning electron microscope analysis.

Evaluation of aging behavior under salt-fog spray conditions of green sandwich structures

ABSTRACT In this paper, the aging resistance of sandwich structures made with cork agglomerate as core and flax-reinforced polymeric laminates as face sheets was investigated for the first time. In order to evaluate their durability in a hostile environment, a sandwich plate was manufactured by vacuum bagging technique and aged under salt-fog spray conditions, according to ASTM B 117 standard. The evolution of the sandwich mechanical properties during the aging exposition was analyzed by carrying out quasi-static flexural tests and Charpy impact tests both on unaged specimens and on specimens aged for 10, 25, and 60 days, respectively. The quasi-static experimental results showed that despite the salt-fog exposition leads to clear decrements in both maximum strength and modulus, the deformation capability of the sandwich structure evidences a noticeable improvement. According to this last result, it was found that the impact strength of the sandwich specimens was clearly increased after the salt-fog exposition evidencing that the studied green sandwich maintains good toughness properties in a hostile environment such as marine.