Tadashi Akiba

Immunohistochemical distinction of malignant mesothelioma from pulmonary adenocarcinoma with anti-surfactant apoprotein, anti-Lewisa, and anti-Tn antibodies

Nine cases of malignant mesothelioma of pure epithelial and biphasic types (five pleural, three peritoneal, and one pericardial mesotheliomas), seven cases of benign adenomatoid tumor of the uterus, and 21 cases of peripheral pulmonary adenocarcinoma of non-mucus-producing type were examined immunohistochemically for expression of keratin, vimentin, carcinoembryonic antigen (CEA), surfactant apoprotein, Lewis blood group antigens, and Tn antigen. The majority (78%) of the malignant mesotheliomas expressed keratin, but CEA and surfactant apoprotein were not detected in any mesotheliomas. On the other hand, pulmonary adenocarcinomas expressed not only keratin (100%), but also CEA (62%) and surfactant apoprotein (62%). The expression of Lewisa blood group antigen and Tn antigen was detected in 76% and 62% of the pulmonary adenocarcinomas, respectively, but only one mesothelioma was stained for Lewisa antigen. This study reveals that the majority of malignant mesotheliomas can be distinguished from pulmonary adenocarcinomas by immunohistochemcial staining for CEA, surfactant apoprotein, Lewisa antigen, and Tn antigen. Immunohistochemically, adenomatoid tumors behaved similarly to malignant mesotheliomas.

Unilateral thoracoscopic subtotal thymectomy for the treatment of stage I and II thymoma

OBJECTIVE The purpose of this study was to determine the feasibility of thoracoscopic thymectomy for the treatment of Masaoka stage I and II thymoma. METHODS We evaluated the short-term outcomes of 40 patients undergoing surgery for Masaoka stage I and II thymomas without myasthenia gravis between July 2000 and July 2008. Of these, 22 patients underwent complete thymoma resection using unilateral thoracoscopic subtotal thymectomy (UTST group), and 18 patients underwent trans-sternal thymectomy (TST group). RESULTS Intra-operative blood loss amounts did not differ significantly between the UTST and TST groups (100.6 ml and 208.1 ml, respectively, p=0.0513). The duration of the postoperative hospital stay was significantly shortened in the UTST group (4.6 days vs 11.2 days, p<0.0001). No patient in the UTST group underwent conversion to open surgery. No severe surgical complications, such as bleeding due to injury to the left brachiocephalic vein, and no postoperative complications, were detected in this series. CONCLUSIONS These preliminary results suggest that thoracoscopic thymectomy for Masaoka stage I and II thymoma is technically feasible and safe, and it is less invasive for the patient. Nevertheless, this procedure requires further investigation in a large series with a longer follow-up.

Importance of Preoperative Imaging with 64-Row Three-Dimensional Multidetector Computed Tomography for Safer Video-Assisted Thoracic Surgery in Lung Cancer

PurposeVideo-assisted thoracic surgery (VATS) has recently been adopted for complicated anatomical lung resections. During these thoracoscopic procedures, surgeons view the operative field on a two-dimensional (2-D) video monitor and cannot palpate the organ directly, thus frequently encountering anatomical difficulties. This study aimed to estimate the usefulness of preoperative three-dimensional (3-D) imaging of thoracic organs.MethodsWe compared the preoperative 64-row three-dimensional multidetector computed tomography (3DMDCT) findings of lung cancer-affected thoracic organs to the operative findings.ResultsIn comparison to the operative findings, the branches of pulmonary arteries, veins, and bronchi were well defined in the 3D-MDCT images of 27 patients.Conclusion3D-MDCT imaging is useful for preoperatively understanding the individual thoracic anatomy in lung cancer surgery. This modality can therefore contribute to safer anatomical pulmonary operations, especially in VATS.

Three-Dimensional Printing Model of Anomalous Bronchi before Surgery

Lung surgeries in patients with bronchial variations have rarely been reported. Here, we describe the case of a patient along with lung cancer with variant anatomy of the right upper lobe bronchus. This variation was evaluated by three-dimensional multi-detector computed tomography angiography with bronchography and a three-dimensional printing model using rapid prototyping. The variant anterior segment bronchus (S3) of the right upper lobe arising from the middle lobe bronchus was confirmed before surgery using the printing model, which helped to determine the extent of resection required and facilitated the understanding of the patients anatomy during surgery. A thoracoscopic anterior segmentectomy and middle lobectomy were performed. The printing model was useful for detecting and evaluating the variant bronchi.

Pulmonary vein analysis using three-dimensional computed tomography angiography for thoracic surgery

ObjectiveLittle information is available regarding the variations in pulmonary vein anatomy for the purpose of thoracic or video-assisted thoracoscopic surgery (VATS). To learn about the types and frequency of pulmonary vein variations for VATS, we reviewed a “tailor-made virtual lung” of patients that was constructed using three-dimensional multidetector computed tomography (3D-MDCT) angiography.MethodsWe reviewed routine 64-row 3D-MDCT pulmonary angiography of 140 patients before surgery between June 2006 and February 2009.ResultsWe observed that most patients had the expected anatomy (98%) on the left side and on the right side (86%). On the right side, 10% of patients had three branches, and 4% patients had four or five branches. Independent drainage of the middle lobe vein directly into the left atrium was observed in 8% patients. Common ostia were observed on the left side in 33% and on the right side in 13% of the patients. The right inferior pulmonary veins branched immediately in 23% of the patients. Right isolated superior posterior branches were observed occasionally (2%).ConclusionsWe observed common ostia more frequently on the left side than on the right. The middle lobe variations were frequent, and the right inferior pulmonary vein often divided at the root. Preoperative 3D-MDCT presented correct pulmonary vein anatomy of the patients.

Thoracoscopic anatomical subsegmentectomy of the right S2b + S3 using a 3D printing model with rapid prototyping

Thoracoscopic segmentectomies and subsegmentectomies are more difficult than lobectomy because of the complexity of the procedure; therefore, preoperative decision-making and surgical procedure planning are essential. In the literature, we could successfully perform thoracoscopic anatomical subsegmentectomy of the right S2b + S3 using a 3D printing model with rapid prototyping. This innovative surgical support model is extremely useful for planning a surgical procedure and identifying the surgical margin.

Anomalous pulmonary vein detected using three-dimensional computed tomography in a patient with lung cancer undergoing thoracoscopic lobectomy

Few clinicians are familiar with the anatomy of anomalous pulmonary veins, and studies reporting patients who required right lower lobectomy for lung cancer and who had anomalies of the middle and lower pulmonary veins are even rarer. This report describes the case of a lung cancer patient who had an anomalous lateral part of the middle lobe vein (V4) draining into the right inferior pulmonary vein, which was confirmed by three-dimensional 64-row multidetector computed axial tomography (3D-MDCT) angiography. She was then successfully treated with video-assisted thoracic surgery. The preoperative 3D imaging of the pulmonary vein and artery allowed us to comprehend fully the patient’s vascular anatomy before the operation. Thus, we recommend preoperative 3D-MDCT angiography for patients with lung cancer undergoing thoracic surgery, especially video-assisted thoracic surgery.

Preoperative evaluation of a tracheal bronchus by three-dimensional 64-row multidetector-row computed tomography (MDCT) bronchography and angiography: report of a case.

We performed successful surgery for lung cancer after confirming the anatomical abnormality of a tracheal bronchus by three-dimensional multidetector-row computed tomography (3D-MDCT) bronchography and angiography. Tracheal bronchus is unusual, and right upper lobectomy for lung cancer would rarely be performed in a patient with a tracheal bronchus. Most clinicians are unfamiliar with the anatomy of a right upper lobe that includes a tracheal bronchus. Preoperative 3D imaging of the tracheal bronchus and its related vessels familiarized us with the anatomy of this patient before the operation. Thus, we recommend preoperative 3DMDCT bronchography and angiography, especially for patients with a possible bronchial anomaly.

An extremely large solitary primary paraganglioma of the lung: report of a case.

We present herein the case of a 38-year-old woman found to have an extremely large solitary primary paraganglioma of the lung. The patient presented with chest pain on exertion and a mass was discovered in the left lower lobe of the lung by chest X-rays and computed tomography (CT). As no other neoplasms were detected elsewhere, a left lower lobectomy was performed. The patient has remained well without any evidence of recurrence for 5 years since her operation. The tumor, measuring 13×12×7 cm, was composed of ovoid cells (Zellballen), which were positive for Fontana-Masson and Grimelius stains, and sustentacular cells. Immunohistochemically, the ovoid cells were positive for neuron-specific enolase, S-100, CAM5.2, Leu7, and chromogranin A, and negative for carcinoembryonic antigen and epithelial membrane antigen. The sustentacular cells were positive for S-100 protein and CAM5.2, and negative for glial fibrillary acid protein. Therefore, the tumor was diagnosed as a paraganglioma. The tumor from our patient is the largest of the 17 solitary primary pulmonary paragangliomas reported thus far in the English-language literature.

Retrospective Comparison of Non-Skin-Sparing Mastectomy and Skin-Sparing Mastectomy with Immediate Breast Reconstruction

Background. We compared Skin-sparing mastectomy (SSM) with immediate breast reconstruction and Non-skin-sparing mastectomy (NSSM), various types of incision in SSM. Method. Records of 202 consecutive breast cancer patients were reviewed retrospectively. Also in the SSM, three types of skin incision were used. Type A was a periareolar incision with a lateral extension, type B was a periareolar incision and axillary incision, and type C included straight incisions, a small elliptical incision (base line of nipple) within areolar complex and axillary incision. Results. Seventy-three SSMs and 129 NSSMs were performed. The mean follow-up was 30.0 (SSM) and 41.1 (NSSM) months. Respective values for the two groups were: mean age 47.0 and 57; seven-year cumulative local disease-free survival 92.1% and 95.2%; post operative skin necrosis 4.1% and 3.1%. In the SSM, average areolar diameter in type A & B was 35.4 mm, 43.0 mm in type C and postoperative nipple-areolar plasty was performed 61% in type A & B, 17% in type C, respectively. Conclusion. SSM for early breast cancer is associated with low morbidity and oncological safety that are as good as those of NSSM. Also in SSM, Type C is far superior as regards cost and cosmetic outcomes.