Taejong Paik

Nonaqueous Synthesis of TiO2 Nanocrystals Using TiF4 to Engineer Morphology, Oxygen Vacancy Concentration, and Photocatalytic Activity

Control over faceting in nanocrystals (NCs) is pivotal for many applications, but most notably when investigating catalytic reactions which occur on the surfaces of nanostructures. Anatase titanium dioxide (TiO(2)) is one of the most studied photocatalysts, but the shape dependence of its activity has not yet been satisfactorily investigated and many questions still remain unanswered. We report the nonaqueous surfactant-assisted synthesis of highly uniform anatase TiO(2) NCs with tailorable morphology in the 10-100 nm size regime, prepared through a seeded growth technique. Introduction of titanium(IV) fluoride (TiF(4)) preferentially exposes the {001} facet of anatase through in situ release of hydrofluoric acid (HF), allowing for the formation of uniform anatase NCs based on the truncated tetragonal bipyramidal geometry. A method is described to engineer the percentage of {001} and {101} facets through the choice of cosurfactant and titanium precursor. X-ray diffraction studies are performed in conjunction with simulation to determine an average NC dimension which correlates with results obtained using electron microscopy. In addition to altering the particle shape, the introduction of TiF(4) into the synthesis results in TiO(2) NCs that are blue in color and display a broad visible/NIR absorbance which peaks in the infrared (λ(max) ≈ 3400 nm). The blue color results from oxygen vacancies formed in the presence of fluorine, as indicated by electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS) studies. The surfactants on the surface of the NCs are removed through a simple ligand exchange procedure, allowing the shape dependence of photocatalytic hydrogen evolution to be studied using monodisperse TiO(2) NCs. Preliminary experiments on the photoreforming of methanol, employed as a model sacrificial agent, on platinized samples resulted in high volumes of evolved hydrogen (up to 2.1 mmol h(-1) g(-1)) under simulated solar illumination. Remarkably, the data suggest that, under our experimental conditions, the {101} facets of anatase are more active than the {001}.

Stoichiometric Control of Lead Chalcogenide Nanocrystal Solids to Enhance Their Electronic and Optoelectronic Device Performance

We investigate the effects of stoichiometric imbalance on the electronic properties of lead chalcogenide nanocrystal films by introducing excess lead (Pb) or selenium (Se) through thermal evaporation. Hall-effect and capacitance-voltage measurements show that the carrier type, concentration, and Fermi level in nanocrystal solids may be precisely controlled through their stoichiometry. By manipulating only the stoichiometry of the nanocrystal solids, we engineer the characteristics of electronic and optoelectronic devices. Lead chalcogenide nanocrystal field-effect transistors (FETs) are fabricated at room temperature to form ambipolar, unipolar n-type, and unipolar p-type semiconducting channels as-prepared and with excess Pb and Se, respectively. Introducing excess Pb forms nanocrystal FETs with electron mobilities of 10 cm(2)/(V s), which is an order of magnitude higher than previously reported in lead chalcogenide nanocrystal devices. Adding excess Se to semiconductor nanocrystal solids in PbSe Schottky solar cells enhances the power conversion efficiency.

Designing high-performance PbS and PbSe nanocrystal electronic devices through stepwise, post-synthesis, colloidal atomic layer deposition.

We report a simple, solution-based, postsynthetic colloidal, atomic layer deposition (PS-cALD) process to engineer stepwise the surface stoichiometry and therefore the electronic properties of lead chalcogenide nanocrystal (NC) thin films integrated in devices. We found that unlike chalcogen-enriched NC surfaces that are structurally, optically, and electronically unstable, lead chloride treatment creates a well-passivated shell that stabilizes the NCs. Using PS-cALD of lead chalcogenide NC thin films we demonstrate high electron field-effect mobilities of ∼4.5 cm(2)/(V s).

Shape-Dependent Plasmonic Response and Directed Self-Assembly in a New Semiconductor Building Block, Indium-Doped Cadmium Oxide (ICO)

The influence of particle shape on plasmonic response and local electric field strength is well-documented in metallic nanoparticles. Morphologies such as rods, plates, and octahedra are readily synthesized and exhibit drastically different extinction spectra than spherical particles. Despite this fact, the influence of composition and shape on the optical properties of plasmonic semiconductor nanocrystals, in which free electrons result from heavy doping, has not been well-studied. Here, we report the first observation of plasmonic resonance in indium-doped cadmium oxide (ICO) nanocrystals, which exhibit the highest quality factors reported for semiconductor nanocrystals. Furthermore, we are able to independently control the shape and free electron concentration in ICO nanocrystals, allowing for the influence of shape on the optical response of a plasmonic semiconductor to be conclusively demonstrated. The highly uniform particles may be self-assembled into ordered single component and binary nanocrystal superlattices, and in thin films, exhibit negative permittivity in the near infrared (NIR) region, validating their use as a new class of tunable low-loss plasmonic building blocks for 3-D optical metamaterials.

Exploiting the colloidal nanocrystal library to construct electronic devices

Assembling nanocrystal devices A wide range of materials can be grown as high-quality colloidal nanocrystals, with properties spanning from conductors to semiconductors and insulators. Although these materials have been included in electronic devices, they usually only form a single component within the device. Choi et al. took a variety of solution-processable colloidal nanocrystals to form all of the device components. Through the development of the right materials, interfaces, and processing steps, they constructed an all-colloid field effect transistor. Science, this issue p. 205 Semiconductor devices are constructed solely from a range of colloidal nanocrystals. Synthetic methods produce libraries of colloidal nanocrystals with tunable physical properties by tailoring the nanocrystal size, shape, and composition. Here, we exploit colloidal nanocrystal diversity and design the materials, interfaces, and processes to construct all-nanocrystal electronic devices using solution-based processes. Metallic silver and semiconducting cadmium selenide nanocrystals are deposited to form high-conductivity and high-mobility thin-film electrodes and channel layers of field-effect transistors. Insulating aluminum oxide nanocrystals are assembled layer by layer with polyelectrolytes to form high–dielectric constant gate insulator layers for low-voltage device operation. Metallic indium nanocrystals are codispersed with silver nanocrystals to integrate an indium supply in the deposited electrodes that serves to passivate and dope the cadmium selenide nanocrystal channel layer. We fabricate all-nanocrystal field-effect transistors on flexible plastics with electron mobilities of 21.7 square centimeters per volt-second.

Designing Tripodal and Triangular Gadolinium Oxide Nanoplates and Self-Assembled Nanofibrils as Potential Multimodal Bioimaging Probes

Here, we report the shape-controlled synthesis of tripodal and triangular gadolinium oxide (Gd2O3) nanoplates. In the presence of lithium ions, the shape of the nanocrystals is readily controlled by tailoring reaction parameters such as temperature and time. We observe that the morphology transforms from an initial tripodal shape to a triangular shape with increasing reaction time or elevated temperatures. Highly uniform Gd2O3 nanoplates are self-assembled into nanofibril-like liquid-crystalline superlattices with long-range orientational and positional order. In addition, shape-directed self-assemblies are investigated by tailoring the aspect ratio of the arms of the Gd2O3 nanoplates. Due to a strong paramagnetic response, Gd2O3 nanocrystals are excellent candidates for MRI contrast agents and also can be doped with rare-earth ions to form nanophosphors, pointing to their potential in multimodal imaging. In this work, we investigate the MR relaxometry at high magnetic fields (9.4 and 14.1 T) and the optical properties including near-IR to visible upconversion luminescence and X-ray excited optical luminescence of doped Gd2O3 nanoplates. The complex shape of Gd2O3 nanoplates, coupled with their magnetic properties and their ability to phosphoresce under NIR or X-ray excitation which penetrate deep into tissue, makes these nanoplates a promising platform for multimodal imaging in biomedical applications.

Engineering charge injection and charge transport for high performance PbSe nanocrystal thin film devices and circuits.

We study charge injection and transport in PbSe nanocrystal thin films. By engineering the contact metallurgy and nanocrystal ligand exchange chemistry and surface passivation, we demonstrate partial Fermi-level pinning at the metal-nanocrystal interface and an insulator-to-metal transition with increased coupling and doping, allowing us to design high conductivity and mobility PbSe nanocrystal films. We construct complementary nanocrystal circuits from n-type and p-type transistors realized from a single nanocrystal material by selecting the contact metallurgy.

Enhanced charge transfer kinetics of CdSe quantum dot-sensitized solar cell by inorganic ligand exchange treatments.

Enhancement of the charge transfer rate in CdSe quantum dot (QD) sensitized solar cells is one of the most important criteria determining cell efficiency. We report a novel strategy for enhancing charge transfer by exchanging the native, long organic chain to an atomic ligand, S(2-), with a simple solid exchange process. S(2-)-ligand exchange is easily executed by dipping the CdSe QDs sensitized photoanode into a formamide solution of K2S. The results show that this exchange process leads to an enhancement of the electronic coupling between CdSe QD and TiO2 by removing the insulating organic barrier to charge transfer, while maintaining its quantum confined band structure. This treatment significantly increases the charge transfer rate at the interfacial region between CdSe QDs and TiO2 as well as between the CdSe QDs and Red/Ox coupling electrolyte, as verified by time-resolved photoluminescence and electrochemical impedance spectroscopy measurements. Finally, the S(2-)-treated photoanode exhibits a much higher photovoltaic performance than the conventional MPA or TGA-capped CdSe QDs sensitized solar cell. The findings reported herein propose an innovative route toward harvesting energy from solar light by enhancing the carrier charge transfer rate.

Shape-directed binary assembly of anisotropic nanoplates: a nanocrystal puzzle with shape-complementary building blocks.

We present the binary self-assembly of two anisotropic nanoplate building blocks mediated by shape complementarity. We use rhombic GdF3 and tripodal Gd2O3 nanoplates as building blocks in which the size and shape are designed to be optimal for complementary organization. A liquid interfacial assembly technique allows the formation of self-assembled binary superlattices from two anisotropic nanoplates over a micrometer length scale. Shape-directed self-assembly guides the position of each anisotropic nanoplate in the binary superlattices, allowing for long-range orientational and positional order of each building block. The design of shape complementary anisotropic building blocks offers the possibility to self-assemble binary superlattices with predictable and designable structures.

Studies of Liquid Crystalline Self-Assembly of GdF3 Nanoplates by In-Plane, Out-of-Plane SAXS

Directed self-assembly of colloidal nanocrystals into ordered superlattices enables the preparation of novel metamaterials with diverse functionalities. Structural control and precise characterization of these superlattices allow the interactions between individual nanocrystal building blocks and the origin of their collective properties to be understood. Here, we report the directed liquid interfacial assembly of gadolinium trifluoride (GdF(3)) nanoplates into liquid crystalline assemblies displaying long-range orientational and positional order. The macroscopic orientation of superlattices is controlled by changing the subphases upon which liquid interfacial assembly occurs. The assembled structures are characterized by a combination of transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) measurements performed on a laboratory diffractometer. By doping GdF(3) nanoplates with europium (Eu(3+)), luminescent phosphorescent superlattices with controlled structure are produced and enable detailed structural and optical characterization.