Terezinha de Jesus Esteves Barata

Compressive and diametral tensile strength of glass ionomer cements

The aim of this study was to compare, in different periods of time, the compressive and diametral tensile strength of a traditional high viscous glass ionomer cement: Fuji IX (GC Corporation), with two new Brazilian GICs: Vitro-Molar (DFL) and Bioglass R (Biodinamica), all indicated for the Atraumatic Restorative Treatment (ART) technique. Fifteen disk specimens (6.0mm diameter x 3.0mm height) for the diametral tensile strength (DTS) test and fifteen cylindrical specimens (6.0mm diameter x 12.0mm height) for the compressive strength (CS) test were made of each GIC. Specimens were stored in deionized water at 37º C and 100% of humidity in a stove until testing. Five specimens of each GIC were submitted to CS and DTS test in each period, namely 1 hour, 24 hours and 7 days. The specimens were tested in a testing machine (Emic) at a crosshead speed of 1.0mm/min for CS and 0.5mm/min for the DTS test until failure occurred. The data were submitted to two-way ANOVA and Tukey tests (alpha=0.05). The mean CS values ranged from 42.03 to 155.47MPa and means DTS from 5.54 to 13.72 MPa, with test periods from 1h to 7 days. The CS and DTS tests showed no statistically significant difference between Fuji IX and Vitro Molar, except for CS test at 1-hour period. Bioglass R had lowest mean value for CS of the cements tested. In DTS test Bioglass R presented no statistically significant differences when compared with all others tested GICs at 1-hour period and Bioglass R presented no difference at 24-hour and 7-day periods when compared to Vitro-Molar. Further studies to investigate other physical properties such as fracture toughness and wear resistance, as well as chemical composition and biocompatibility, are now needed to better understand the properties of these new Brazilian GICs.

Comparasion of two minimally invasive methods on the longevity of glass ionomer cement restorations: short-term results of a pilot study

The purpose of this study was to evaluate the clinical performance of glass ionomer cement (GIC) restorations comparing two minimally invasive methods in permanent teeth after 12 months. Fifty pregnant women (second trimester of pregnancy), mean age 22 ± 5.30 years, were treated by two previously trained operators. The treatment approaches tested were: chemomechanical method (CarisolvTM; MediTeam) and atraumatic restorative treatment (ART). A split-mouth study design was used in which the two treatments were randomly placed in 50 matched pairs of permanent teeth. The chemomechanical method (CM) was the test group and the ART was the control group. The treatments were performed in Public Health Centers. The tested restorative material was a high-strength GIC (Ketac Molar; 3M/ESPE). The restorations were placed according to the ART guidelines. Two calibrated independent examiners evaluated the restorations in accordance with ART criteria. The interexaminer kappa was 0.97. Data were analyzed using 95% confidence interval on the binomial distribution and Fishers exact test at 5% significance level. In a 12-month follow-up, 86% of the restorations were evaluated. In the test group (CM), 100% (CI=93.3-100%) of the restorations were considered successful. In the control group (ART) 97.6% (CI=87.4-99.9%) of the restorations were considered successful and 2.4% unsuccessful (marginal defect >0.5 mm). There was no statistically significant difference between the 12-mounth success rate for both groups (Fishers exact test: P=0.49) and between the two operators (Fishers exact test: P=1.00). Both minimally invasive methods, chemomechanical method and ART, showed a similar clinical performance after 12 months of follow up.

Six-month evaluation of ART one-surface restorations in a community with high caries experience in Brazil

The aim of this study to evaluate the success rate in one-surface ART restorations placed in permanent molars using a glass ionomer cement especially developed for ART in a community with high caries experience; to evaluate the operator influence on its success, post-operative sensitivity and technique acceptance by patients. Prior to placement of the restorations, the Gingival Bleeding Index, Visible Plaque Index, DMFT, dmft indices and treatment needed were assessed. One hundred and fifty five one-surface restorations were placed in permanent molars of school children, according to the WHO ART manual, 1997. After 6 months, the success rate was verified clinically and by slides. At baseline, the mean DMFT was 2.56 (±1.08) and the mean dmft, 2.53 (±2.33). Operators A and B have placed 102 and 53 ART restorations respectively. The mean time of placement was 16 minutes and 25 seconds to operator A and 14 minutes and 43 seconds to operator B. At 6-month follow up, 152 ART restorations were evaluated and 97.3% were assessed to be successful. Two restorations were excluded from the sample because the ART restorations were replaced by amalgam fillings. Only 4 restorations have failed, in which 2 due to caries, 1 due to fistula presence and the other because the restoration was lost. Four patients reported postoperative sensitivity. At this study period, ART treatment seems to be suitable for its purpose. Further evaluations are necessary to the new glass ionomer cements especially developed for ART technique provided good results at 6-month follow up in a community with high DMFT and dmft indices. The success rate for one-surface cavities in permanent molars was 97.3%, and the studied indices seemed to have no influence in this early evolution period.

Indirect pulp treatment in a permanent molar: case reort of 4-year follow-up

This case report describes the Indirect Pulp Treatment (IPT) of deep caries lesion in a permanent molar. A 16-year-old male patient reported discomfort associated with thermal stimulation on the permanent mandibular left first molar. The radiographs revealed a deep distal caries lesion, very close to the pulp, absence of radiolucencies in the periapical region, and absence of periodontal space thickening. Pulp sensitivity was confirmed by thermal pulp vitality tests. Based on the main complaint and the clinical and radiographic examinations, the treatment plan was established to preserve pulp vitality. Clinical procedures consisted of removing the infected dentin and lining the caries-affected dentin with calcium hydroxide paste. The tooth was provisionally sealed for approximately 60 days. After this period, tooth vitality was confirmed, the remaining carious dentin was removed, and the tooth was restored. At 4-year follow-up, no clinical or radiographic pathological findings were found.

Seven-Year Clinical Performance of Resin Composite Versus Resin-Modified Glass Ionomer Restorations in Noncarious Cervical Lesions

PURPOSE The purpose of this study was to comparatively assess the seven-year clinical performance of a one-bottle etch-and-rinse adhesive with resin composite (RC) and resin-modified glass ionomer (RMGI) restorations in noncarious cervical lesions. METHODS AND MATERIALS One operator placed 70 restorations (35 restorations in each group) in 30 patients under rubber dam isolation without mechanical preparation. The restorations were directly assessed by two independent examiners, using modified US Public Health Service criteria at baseline and 6, 12, 24, 60, and 84 months. The obtained data were tabulated and statistically analyzed using the Fisher and McNemar tests. A difference was significant if p<0.05. RESULTS Twenty patients were available for recall after seven years (66.6%), and 25 RC and 26 RMGI restorations out of 70 restorations were evaluated. Excellent agreement was registered for all criteria between examiners (κ≥0.85). Alfa and bravo scores were classified as clinically acceptable. The McNemar test detected significant differences within RC restorations between baseline and seven-year evaluations for anatomic form, marginal integrity, and retention (p<0.05). For RMGI restorations, a significant difference was identified for marginal integrity (p<0.05). As to material comparison, the Fisher exact showed a better retention performance for RMGI restorations than for RC restorations (p<0.05). Twelve composite restorations were dislodged (52.0% retention) and three ionomer restorations were lost (88.5% retention). The cumulative success rate for RC and RMGI was 30% and 58.1%, respectively. CONCLUSIONS After seven years of service, the clinical performance of RMGI restorations was superior to that of the adhesive system/resin composite restorations in this study.